The DOI matches its Crossref record; 127 of the 127 references it cites were found in a registry or an index.
Review of the current technologies and performances of hydrogen compression for stationary and automotive applications
Open accessAbstract
Abstract Hydrogen could play an important role as an energy vector in the coming decades in the framework of Sustainable Development. It is the universe's most abundant element and thus a never-ending source of energy. Hydrogen can be directly converted into electric energy by using fuel cells without producing toxic gases. It can also be produced by renewable sources such as biomass, solar and wind energies with no impact for the environment. However, although hydrogen represents a promising eco-friendly solution for energy transition, several issues related to its storage and delivery remain to be solved if it is to be widely used in both stationary and automotive applications. Hydrogen has the lowest volumetric energy density among the commonly used fuels, i.e., 0.01079 MJ/L at atmospheric pressure. Compression is the direct solution to overcome this obstacle. High pressure levels can give satisfying energy densities. The present review summarises the state of the art of the most classical hydrogen compression technologies. We shall present the technical and design features of mechanical compressors, i.e., reciprocating, diaphragm, linear and ionic liquid compressors, as well as of innovative non-mechanical technologies specifically conceived for hydrogen applications, such as cryogenic, metal hydride, electrochemical and adsorption compressors. The basic operating principles and the potential performance levels for each compression technology are analysed. Specifically, their current uses in hydrogen applications and their technological limits are described along with proposals of possible ways of improving their performance levels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Perry's chemical engineers' handbook
(1998) · Choice Reviews Online · doi:10.5860/choice.35-3079 · Cited by 5,897
A comprehensive review on PEM water electrolysis
Carmo, M., Fritz, D. L., Mergel, J., & Stolten, D. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.01.151 · Cited by 5,492
Hydrogen Storage in Microporous Metal-Organic Frameworks
Rosi, N. L., Eckert, J., Eddaoudi, M., Vodak, D. T., Kim, J., O'Keeffe, M., & Yaghi, O. M. (2003) · Science · doi:10.1126/science.1083440 · Cited by 4,846
Ionic-liquid materials for the electrochemical challenges of the future
Armand, M., Endres, F., MacFarlane, D. R., Ohno, H., & Scrosati, B. (2009) · Nature Materials · doi:10.1038/nmat2448 · Cited by 4,619
Official Journal of the European Communities
(1984) · Analytical Proceedings · doi:10.1039/ap9842100196 · Cited by 4,027
Hydrogen Storage in Metal–Organic Frameworks
Suh, M. P., Park, H. J., Prasad, T. K., & Lim, D.-W. (2012) · Chemical Reviews · doi:10.1021/cr200274s · Cited by 3,689
Hosseini, S. E., & Wahid, M. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.112 · Cited by 2,567
Materials for hydrogen storage
Züttel, A. (2003) · Materials Today · doi:10.1016/s1369-7021(03)00922-2 · Cited by 2,216
Energy applications of ionic liquids
MacFarlane, D. R., Tachikawa, N., Forsyth, M., Pringle, J. M., Howlett, P. C., Elliott, G. D., Davis, J. H., Watanabe, M., Simon, P., & Angell, C. A. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42099j · Cited by 1,745
Understanding Ionic Liquids at the Molecular Level: Facts, Problems, and Controversies
Weingärtner, H. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200604951 · Cited by 1,543
Z�ttel, A. (2004) · Naturwissenschaften · doi:10.1007/s00114-004-0516-x · Cited by 1,351
Yang, J., Sudik, A., Wolverton, C., & Siegel, D. J. (2010) · Chem. Soc. Rev. · doi:10.1039/b802882f · Cited by 1,227
Hydrogen and fuel cells: Towards a sustainable energy future
Edwards, P. P., Kuznetsov, V. L., David, W. I. F., & Brandon, N. P. (2008) · Energy Policy · doi:10.1016/j.enpol.2008.09.036 · Cited by 1,202
PEM electrolysis for production of hydrogen from renewable energy sources
Barbir, F. (2005) · Solar Energy · doi:10.1016/j.solener.2004.09.003 · Cited by 1,112
Hydrogen the fuel for 21st century
Jain, I. P. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.05.093 · Cited by 1,104 · cited 2×
“Hydrogen exhibits the largest gravimetric energy density among non-nuclear fuels, and can be easily converted into thermal, mechanical and electrical energy (7).”
BackgroundGas Solubility in Ionic Liquids
Lei, Z., Dai, C., & Chen, B. (2014) · Chemical Reviews · doi:10.1021/cr300497a · Cited by 1,038
New approaches to hydrogen storage
Graetz, J. (2009) · Chem. Soc. Rev. · doi:10.1039/b718842k · Cited by 1,001
Marbán, G., & Valdés-Solís, T. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.12.017 · Cited by 906
Hydrogen adsorption in different carbon nanostructures
Panella, B., Hirscher, M., & Roth, S. (2005) · Carbon · doi:10.1016/j.carbon.2005.03.037 · Cited by 781
Hydrogen Adsorption in Metal–Organic Frameworks: Cu‐MOFs and Zn‐MOFs Compared
Panella, B., Hirscher, M., Pütter, H., & Müller, U. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500561 · Cited by 718
05/02653 PEM electrolysis for production of hydrogen from renewable energy sources
(2005) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(05)83151-0 · Cited by 655
Gas Adsorption and Storage in Metal−Organic Framework MOF-177
Li, Y., & Yang, R. T. (2007) · Langmuir · doi:10.1021/la702466d · Cited by 636
Determining the lowest-cost hydrogen delivery mode
YANG, C., & OGDEN, J. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.05.009 · Cited by 628 · cited 1×
“has been shown that the cheapest hydrogen storage-delivery mode is obtained by compression and delivery with a truck, especially for small stations and low demands (21).”
BackgroundMetal hydride hydrogen compressors: A review
Lototskyy, M. V., Yartys, V. A., Pollet, B. G., & Bowman, R. C. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.01.158 · Cited by 555
Why Does the Linear Driving Force Model for Adsorption Kinetics Work?
Sircar, S., & Hufton, J. R. (2000) · Adsorption · doi:10.1023/a:1008965317983 · Cited by 476
Perspective on hydrogen energy carrier and its automotive applications
Cipriani, G., Di Dio, V., Genduso, F., La Cascia, D., Liga, R., Miceli, R., & Ricco Galluzzo, G. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.03.174 · Cited by 468
Technical assessment of compressed hydrogen storage tank systems for automotive applications
Hua, T. Q., Ahluwalia, R. K., Peng, J.-K., Kromer, M., Lasher, S., McKenney, K., Law, K., & Sinha, J. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.11.090 · Cited by 428
Hydrogen storage for fuel cell vehicles
Hwang, H. T., & Varma, A. (2014) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2014.04.004 · Cited by 399
Edwards, P. P., Kuznetsov, V. L., & David, W. I. F. (2007) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2006.1965 · Cited by 356
Hydrogen Storage in Activated Carbons and Activated Carbon Fibers
de la Casa-Lillo, M. A., Lamari-Darkrim, F., Cazorla-Amorós, D., & Linares-Solano, A. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp014543m · Cited by 346
High-density automotive hydrogen storage with cryogenic capable pressure vessels
Aceves, S. M., Espinosa-Loza, F., Ledesma-Orozco, E., Ross, T. O., Weisberg, A. H., Brunner, T. C., & Kircher, O. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.11.069 · Cited by 341
Does a Hydrogen Economy Make Sense?
Bossel, U. (2006) · Proceedings of the IEEE · doi:10.1109/jproc.2006.883715 · Cited by 322
Technical assessment of cryo-compressed hydrogen storage tank systems for automotive applications
Ahluwalia, R., Hua, T. Q., Peng, J.-K., Lasher, S., McKenney, K., Sinha, J., & Gardiner, M. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.02.074 · Cited by 314
Advances in Cryogenic Engineering
(1991) · Springer eBooks · doi:10.1007/978-1-4615-3368-9 · Cited by 295
Hydrogen economy for a sustainable development: state-of-the-art and technological perspectives
Conte, M. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00893-x · Cited by 288
Standard handbook of petroleum & natural gas engineering.
Lyons, W. C., & Plisga, G. J. (1996) · Cited by 283
A Review on Solid State Hydrogen Storage Material
Prachi R., P., Mahesh M., W., & Aneesh C., G. (2016) · Advances in Energy and Power · doi:10.13189/aep.2016.040202 · Cited by 269
Thermodynamics - Interaction Studies - Solids, Liquids and Gases
Moreno-Pirajan, J. C. (2011) · InTech eBooks · doi:10.5772/823 · Cited by 269
Renewable energy systems based on hydrogen for remote applications
Agbossou, K., Chahine, R., Hamelin, J., Laurencelle, F., Anouar, A., St‐Arnaud, J. M., & Bose, T. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00495-5 · Cited by 266
Low-pressure adsorption storage of hydrogen
Chahine, R., & Bose, T. (1994) · International Journal of Hydrogen Energy · doi:10.1016/0360-3199(94)90121-x · Cited by 263
5 Years of hydrogen storage research in the U.S. DOE Metal Hydride Center of Excellence (MHCoE)
Klebanoff, L. E., & Keller, J. O. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.01.051 · Cited by 257
de Ven, J. D. V., & Li, P. Y. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.12.001 · Cited by 254
Comparison of electrical energy efficiency of atmospheric and high-pressure electrolysers
ROY, A., Watson, S. J., & Infield, D. G. (2006) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.01.018 · Cited by 244
(2014) · CRC Press eBooks · doi:10.1201/b17226 · Cited by 234
PEM fuel cell model and simulation in Matlab–Simulink based on physical parameters
Abdin, Z., Webb, C. J., & Gray, E. M. (2016) · Energy · doi:10.1016/j.energy.2016.10.033 · Cited by 216
The Future of the Hydrogen Economy: Bright or Bleak?
Bossel, U., Eliasson, B., & Taylor, G. (2003) · Cogeneration & Distributed Generation Journal · doi:10.1080/15453660309509023 · Cited by 210
A Review of Heat Transfer Issues in Hydrogen Storage Technologies
Zhang, J., Fisher, T. S., Ramachandran, P. V., Gore, J. P., & Mudawar, I. (2005) · Journal of Heat Transfer · doi:10.1115/1.2098875 · Cited by 201 · cited 2×
“A metal hydride is a binary combination of hydrogen and a metal (elemental metal, alloy or intermetallic compound) in which the latter reacts reversibly with hydrogen (59):”
BackgroundLemofouet, S., & Rufer, A. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.878323 · Cited by 193
High Temperature Polymer Electrolyte Membrane Fuel Cells: Approaches, Status, and Perspectives
Li, Q., Aili, D., Hjuler, H. A., & Jensen, J. O. (2015) · Springer eBooks · doi:10.1007/978-3-319-17082-4 · Cited by 186
Hydrogen and Fuel Cells Fundamentals, Technologies and Applications
Stolten, D. (2010) · Cited by 185
Vehicular storage of hydrogen in insulated pressure vessels
ACEVES, S., BERRY, G., MARTINEZFRIAS, J., & ESPINOSALOZA, F. (2006) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.02.019 · Cited by 173
Enhanced storage of hydrogen at the temperature of liquid nitrogen
Zhou, L. (2004) · International Journal of Hydrogen Energy · doi:10.1016/s0360-3199(03)00155-1 · Cited by 170
The compression of hydrogen in an electrochemical cell based on a PE fuel cell design
Ströbel, R., Oszcipok, M., Fasil, M., Rohland, B., Jörissen, L., & Garche, J. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00941-7 · Cited by 169
Hydrogen Storage: State-of-the-Art and Future Perspective.
Tzimas, E., Constantina, F., dimitris, P. S., & Jean-bernard, V. (2003) · Joint Research Centre (European Commission) · Cited by 161
Feng, M., Qu, R., Wei, Z., Wang, L., Sun, P., & Wang, Z. (2015) · Scientific Reports · doi:10.1038/srep09859 · Cited by 155
Lototskyy, M. V., Tolj, I., Davids, M. W., Klochko, Y. V., Parsons, A., Swanepoel, D., Ehlers, R., Louw, G., van der Westhuizen, B., Smith, F., et al. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.01.148 · Cited by 152
Electrochemical hydrogen compressor
Rohland, B., Eberle, K., Ströbel, R., Scholta, J., & Garche, J. (1998) · Electrochimica Acta · doi:10.1016/s0013-4686(98)00144-3 · Cited by 152
Aceves, S. M., Petitpas, G., Espinosa-Loza, F., Matthews, M. J., & Ledesma-Orozco, E. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.11.123 · Cited by 150
Thermal conductivity of metal hydride materials for storage of hydrogen: Experimental investigation
Hahne, Ε. (1998) · International Journal of Hydrogen Energy · doi:10.1016/s0360-3199(97)00020-7 · Cited by 143
Grigoriev, S. V., Shtatniy, I. G., Millet, P., Porembsky, V. I., & Fateev, V. N. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.07.012 · Cited by 142
Thermodynamics of Metal Hydrides: Tailoring Reaction Enthalpies of Hydrogen Storage Materials
Dornheim, M. (2011) · InTech eBooks · doi:10.5772/21662 · Cited by 141
Supercritical cryo-compressed hydrogen storage for fuel cell electric buses
Ahluwalia, R., Peng, J. K., Roh, H. S., Hua, T. Q., Houchins, C., & James, B. D. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.04.113 · Cited by 138
Hydrogen storage systems using activated carbon
Noh, J. S., Agarwal, R. K., & Schwarz, J. A. (1987) · International Journal of Hydrogen Energy · doi:10.1016/0360-3199(87)90132-7 · Cited by 129
Experimental evidence of an upper limit for hydrogen storage at 77 K on activated carbons
Fierro, V., Szczurek, A., Zlotea, C., Mareche, J. F., Izquierdo, M. T., Albiniak, A., Latroche, M., Furdin, G., & Celzard, A. (2010) · Carbon · doi:10.1016/j.carbon.2010.01.052 · Cited by 124
Self-citationWang, L., Tamainot-Telto, Z., Thorpe, R., Critoph, R. E., Metcalf, S. J., & Wang, R. Z. (2011) · Renewable Energy · doi:10.1016/j.renene.2011.01.005 · Cited by 123
Stress on a reaction vessel by the swelling of a hydrogen absorbing alloy
Nasako, K., Ito, Y., Hiro, N., & OSUMI, M. (1998) · Journal of Alloys and Compounds · doi:10.1016/s0925-8388(97)00246-6 · Cited by 123
Hydrogen Production by Electrolysis
Andreassen, K. (1998) · Springer eBooks · doi:10.1007/978-94-015-9054-9_11 · Cited by 117
Compressors: Selection and Sizing
Brown, R. N. (1986) · Cited by 114
Hermosilla-Lara, G., Momen, G., Marty, P., Neindre, B. L., & Hassouni, K. (2006) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.10.048 · Cited by 113
Automotive hydrogen storage system using cryo-adsorption on activated carbon
Ahluwalia, R., & Peng, J. K. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.05.023 · Cited by 104
Fuel Cells : Data, Facts and Figures
Stolten, D., Samsun, R. C. 1., & Garland, N. (2016) · Wiley eBooks · doi:10.1002/9783527693924 · Cited by 96
Risk assessment of Hydrogen fueling stations for 70MPa FCVs
KIKUKAWA, S., YAMAGA, F., & MITSUHASHI, H. (2008) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.08.063 · Cited by 94
On-board hydrogen storage systems for automotive application
Das, L. M. (1996) · International Journal of Hydrogen Energy · doi:10.1016/0360-3199(96)00006-7 · Cited by 94
Hydrogen adsorption and desorption by carbon materials
Kojima, Y., Kawai, Y., Koiwai, A., Suzuki, N., Haga, T., Hioki, T., & Tange, K. (2005) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2005.09.077 · Cited by 93
Hydrogen recovery and purification using the solid polymer electrolyte electrolysis cell
SEDLAK, J. M., AUSTIN, J., & LaConti, A. B. (1981) · International Journal of Hydrogen Energy · doi:10.1016/0360-3199(81)90096-3 · Cited by 90
Hydride alloys properties investigations for hydrogen sorption compressor
Dehouche, Z., Grimard, N., Laurencelle, F., Goyette, J., & Bose, T. (2005) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2005.01.029 · Cited by 89
Thermal simulations of a hydrogen storage tank during fast filling
Simonovski, I., Baraldi, D., Melideo, D., & Acosta, B. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.06.114 · Cited by 82
Some fundamental aspects in electrochemical hydrogen purification/compression
Casati, C., Longhi, P., ZANDERIGHI, L., & Bianchi, F. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.01.096 · Cited by 81
Adsorption and compression contributions to hydrogen storage in activated anthracites
Fierro, V., Zhao, W., Izquierdo, M. T., Aylón, E., & Celzard, A. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.06.004 · Cited by 81
Self-citationA study on 70MPa metal hydride hydrogen compressor
Li, H., Wang, X., Dong, Z., Xu, L., & Chen, C. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2010.04.206 · Cited by 78
Electrochemical hydrogen pump for recirculation of hydrogen in a fuel cell stack
Barbir, F., & Görgün, H. (2006) · Journal of Applied Electrochemistry · doi:10.1007/s10800-006-9266-0 · Cited by 78
Physisorption, chemisorption and spill-over contributions to hydrogen storage
Schaefer, S., Fierro, V., Szczurek, A., Izquierdo, M. T., & Celzard, A. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.07.262 · Cited by 78
Self-citationTechnology and Uses of Liquid Hydrogen
(1964) · Elsevier eBooks · doi:10.1016/c2013-0-01825-7 · Cited by 77
Tellez-Juárez, M. C., Fierro, V., Zhao, W., Fernández-Huerta, N., Izquierdo, M. T., Reguera, E., & Celzard, A. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.01.071 · Cited by 77
Self-citation(2014) · doi:10.1016/j.ijhydene.2014.04.200 · Cited by 77
PEM fuel cells as membrane reactors: kinetic analysis by impedance spectroscopy
Ciureanu, M., Mikhailenko, S. D., & Kaliaguine, S. (2003) · Catalysis Today · doi:10.1016/s0920-5861(03)00233-5 · Cited by 76
Heat and Mass Transfer in Solid State Hydrogen Storage: A Review
Murthy, S. S. (2012) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4005156 · Cited by 75
Separation and compression characteristics of hydrogen by use of proton exchange membrane
Onda, K., Ichihara, K., Nagahama, M., Minamoto, Y., & Araki, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.018 · Cited by 75
Suermann, M., Kiupel, T., Schmidt, T. J., & Büchi, F. N. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1361712jes · Cited by 75
Hydrogen production by electrolysis
Chakrabarty, P., Alam, K. C. A., Paul, S. K., & Saha, S. C. (2023) · Elsevier eBooks · doi:10.1016/b978-0-443-15329-7.00013-2 · Cited by 73
Schaefer, S., Fierro, V., Izquierdo, M. T., & Celzard, A. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.086 · Cited by 72
Self-citationModeling of adsorbent based hydrogen storage systems
Hardy, B. J., Corgnale, C., Chahine, R., Richard, M., Garrison, S. L., Tamburello, D., Cossement, D., & Anton, D. L. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.12.125 · Cited by 70
Insulated pressure vessels for hydrogen storage on vehicles*1
Aceves, S. M. (1998) · International Journal of Hydrogen Energy · doi:10.1016/s0360-3199(97)00079-7 · Cited by 69
A hydrogen-compression system using porous metal hydride pellets of LaNi5-xAlxLaNi5-xAlx
Kim, J.-K. (2007) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2007.10.027 · Cited by 68
A 70 MPa hydrogen-compression system using metal hydrides
Wang, X., Liu, H., & Li, H. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.04.193 · Cited by 66
Preliminary evaluation of the performance of an adsorption‐based hydrogen storage system
Richard, M., Cossement, D., Chandonia, P., Chahine, R., Mori, D., & Hirose, K. (2009) · AIChE Journal · doi:10.1002/aic.11904 · Cited by 62
Thermally Driven Metal Hydride Hydrogen Compressor for Medium-Scale Applications
Lototskyy, M. V., Klochko, Y. V., Linkov, V., Lawrie, P., & Pollet, B. G. (2012) · Energy Procedia · doi:10.1016/j.egypro.2012.09.041 · Cited by 57
Hydrogen Storage Technologies: New Materials, Transport and Infrastructure
Godula‐Jopek, A., Jehle, W., & Wellnitz, J. (2012) · doi:10.1002/9783527649921 · Cited by 56
Improvement of hydrogen storage by adsorption using 2‐D modeling of heat effects
Delahaye, A., Aoufi, A., Gicquel, A., & Pentchev, I. (2002) · AIChE Journal · doi:10.1002/aic.690480919 · Cited by 54
Paggiaro, R., Bénard, P., & Polifke, W. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.10.108 · Cited by 52
Hydrogen storage at low temperature and high pressure for application in automobile manufacturing
Chilev, C., & Lamari, F. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.11.099 · Cited by 52
Hydrogen Storage Technologies: New Materials, Transport, and Infrastructure
Godula‐Jopek, A., Jehle, W., & Wellnitz, J. (2012) · Cited by 47
Cryo‐Compressed Hydrogen Storage
Kampitsch, T. B. M., & Kircher, O. (2016) · Wiley eBooks · doi:10.1002/9783527693924.ch17 · Cited by 46
Hydrogen: Its Technology and Implications
Cox (2018) · CRC Press eBooks · doi:10.1201/9781351073301 · Cited by 45
Techno-Economic Analysis of High-Pressure Metal Hydride Compression Systems
Corgnale, C., & Sulic, M. (2018) · Metals · doi:10.3390/met8060469 · Cited by 44
Wu, X., He, G., Yu, L., & Li, X. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400329s · Cited by 42
Evaluation of a thermally-driven metal-hydride-based hydrogen compressor
Kelly, N. A., & Girdwood, R. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.04.088 · Cited by 37
An Overview of the Development of Sorption Refrigeration
Wade, L. A. (1992) · Springer eBooks · doi:10.1007/978-1-4615-3368-9_41 · Cited by 36
Forsthoffer's Best Practice Handbook for Rotating Machinery
Forsthoffer, W. E. (2011) · Elsevier eBooks · doi:10.1016/c2009-0-64191-x · Cited by 36
Thermal management and desorption modeling of a cryo-adsorbent hydrogen storage system
Chakraborty, A., & Kumar, S. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.11.113 · Cited by 35
Effective thermal conductivity of packed bed adsorbers: Part 1 – Experimental study
Rouhani, M., Huttema, W., & Bahrami, M. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.01.142 · Cited by 33
Ausiello, A., Micoli, L., Turco, M., Toscano, G., Florio, C., & Pirozzi, D. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.10.021 · Cited by 31
High-temperature activated AB2nanopowders for metal hydride hydrogen compression
Koultoukis, E. D., Gkanas, E. I., Makridis, S. S., Christodoulou, C. N., Fruchart, D., & Stubos, A. K. (2014) · International Journal of Energy Research · doi:10.1002/er.3147 · Cited by 29
Cryo‐compressed Hydrogen Storage
Brunner, T., & Kircher, O. (2016) · doi:10.1002/9783527674268.ch29 · Cited by 26
Electrochemical Hydrogen Pumping
Fishel, K., Qian, G., Eisman, G. A., & Benicewicz, B. C. (2015) · Springer eBooks · doi:10.1007/978-3-319-17082-4_24 · Cited by 23
High‐Temperature Electrochemical Hydrogen Pumps and Separators
PASIERB, P., & Rękas, M. (2011) · International Journal of Electrochemistry · doi:10.4061/2011/905901 · Cited by 20
Thermodynamics of thermally-driven adsorption compression
Santori, G., & Luberti, M. (2016) · Sustainable materials and technologies · doi:10.1016/j.susmat.2016.09.001 · Cited by 20
Hydrogen Energy and Vehicle Systems
(2016) · CRC Press eBooks · doi:10.1201/b13046 · Cited by 20
Thermal effect and flow-through cooling of an adsorptive hydrogen delivery tank
Tong, L., Xiao, J., Cai, Y., et al. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.04.242 · Cited by 18
Hydrogen Adsorption on Nanotextured Carbon Materials
Sdanghi, G., Sdanghi, G., Maranzana, G., Celzard, A., & Fierro, V. (2018) · doi:10.1002/9781119460572.ch9 · Cited by 16
Self-citationTechnology and uses of liquid hydrogen
Ruhemann, M. (1964) · Vacuum · doi:10.1016/0042-207x(64)92181-5 · Cited by 16
Conceptual design analysis of a compressor-driven sorption cooling system
Swain, S., & Ghosh, I. (2009) · International Journal of Energy Research · doi:10.1002/er.1618 · Cited by 14
Development of an Advanced Sorption Compressor and Its Application in a 125 K Cryocooler
Álvarez, J., Krylo, R., Snapp, R. D., Weston, C., Sywulka, P., & Abell, G. C. (1995) · Springer eBooks · doi:10.1007/978-1-4757-9888-3_58 · Cited by 12
Hydrogen production and filling of fuel cell cars
Najdi, R. A., Shaban, T. G., Mourad, M. J., & Karaki, S. H. (2016) · International Conference on Advances in Computational Tools for Engineering Applications · doi:10.1109/actea.2016.7560109 · Cited by 12
Numerical study of thermal effects in cryo-adsorptive hydrogen storage tank
Xiao, J., Yang, H. C., Bénard, P., & Chahine, R. (2013) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.4798425 · Cited by 10
New technique for generating continuous sorption cooling in a single adsorbent column
Koley, S., & Ghosh, I. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.03.005 · Cited by 9
Theoretical study of effect of working fluid on the performance of 77–100K adsorption cryocooler
Luo, B., Wang, Z. L., Yan, T., Hong, G. T., Li, Y. L., & Liang, J. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.057 · Cited by 4
Cited by
Hydrogen in energy transition: A review
Kovač, A., Paranos, M., & Marciuš, D. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.11.256 · Cited by 1,214
Materials for hydrogen-based energy storage – past, recent progress and future outlook
Hirscher, M., Yartys, V. A., Baricco, M., Bellosta von Colbe, J., Blanchard, D., Bowman, R. C., Broom, D. P., Buckley, C. E., Chang, F., Chen, P., et al. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.153548 · Cited by 949
Zhang, L., Jia, C., Bai, F., Wang, W., An, S., Zhao, K., Li, Z., Li, J., & Sun, H. (2024) · Fuel · doi:10.1016/j.fuel.2023.129455 · Cited by 659
Global hydrogen development - A technological and geopolitical overview
Lebrouhi, B. E., Djoupo, J. J., Lamrani, B., Benabdelaziz, K., & Kousksou, T. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.12.076 · Cited by 551
Large-scale compressed hydrogen storage as part of renewable electricity storage systems
Elberry, A. M., Thakur, J., Santasalo-Aarnio, A., & Larmi, M. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.02.080 · Cited by 515
Metadata
- Authors
- Sdanghi, G., Maranzana, G., Celzard, A., & Fierro, V.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 102
- Pages
- 150-170
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W2905372326
- Cited by
- 443
- References
- 127
- FWCI
- 7.59
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.