The DOI matches its Crossref record; 127 of the 127 references it cites were found in a registry or an index.
Review of the current technologies and performances of hydrogen compression for stationary and automotive applications
Open accessAbstract
Abstract Hydrogen could play an important role as an energy vector in the coming decades in the framework of Sustainable Development. It is the universe's most abundant element and thus a never-ending source of energy. Hydrogen can be directly converted into electric energy by using fuel cells without producing toxic gases. It can also be produced by renewable sources such as biomass, solar and wind energies with no impact for the environment. However, although hydrogen represents a promising eco-friendly solution for energy transition, several issues related to its storage and delivery remain to be solved if it is to be widely used in both stationary and automotive applications. Hydrogen has the lowest volumetric energy density among the commonly used fuels, i.e., 0.01079 MJ/L at atmospheric pressure. Compression is the direct solution to overcome this obstacle. High pressure levels can give satisfying energy densities. The present review summarises the state of the art of the most classical hydrogen compression technologies. We shall present the technical and design features of mechanical compressors, i.e., reciprocating, diaphragm, linear and ionic liquid compressors, as well as of innovative non-mechanical technologies specifically conceived for hydrogen applications, such as cryogenic, metal hydride, electrochemical and adsorption compressors. The basic operating principles and the potential performance levels for each compression technology are analysed. Specifically, their current uses in hydrogen applications and their technological limits are described along with proposals of possible ways of improving their performance levels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Perry's chemical engineers' handbook
(1998) · Choice Reviews Online · doi:10.5860/choice.35-3079 · Cited by 5,897
A comprehensive review on PEM water electrolysis
Carmo, M., Fritz, D. L., Mergel, J., & Stolten, D. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.01.151 · Cited by 5,492
Hydrogen Storage in Microporous Metal-Organic Frameworks
Rosi, N. L., Eckert, J., Eddaoudi, M., Vodak, D. T., Kim, J., O'Keeffe, M., & Yaghi, O. M. (2003) · Science · doi:10.1126/science.1083440 · Cited by 4,846
Ionic-liquid materials for the electrochemical challenges of the future
Armand, M., Endres, F., MacFarlane, D. R., Ohno, H., & Scrosati, B. (2009) · Nature Materials · doi:10.1038/nmat2448 · Cited by 4,619
Official Journal of the European Communities
(1984) · Analytical Proceedings · doi:10.1039/ap9842100196 · Cited by 4,027
Hydrogen Storage in Metal–Organic Frameworks
Suh, M. P., Park, H. J., Prasad, T. K., & Lim, D.-W. (2012) · Chemical Reviews · doi:10.1021/cr200274s · Cited by 3,689
Hosseini, S. E., & Wahid, M. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.112 · Cited by 2,567
Materials for hydrogen storage
Züttel, A. (2003) · Materials Today · doi:10.1016/s1369-7021(03)00922-2 · Cited by 2,216
Energy applications of ionic liquids
MacFarlane, D. R., Tachikawa, N., Forsyth, M., Pringle, J. M., Howlett, P. C., Elliott, G. D., Davis, J. H., Watanabe, M., Simon, P., & Angell, C. A. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42099j · Cited by 1,745
Understanding Ionic Liquids at the Molecular Level: Facts, Problems, and Controversies
Weingärtner, H. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200604951 · Cited by 1,543
Cited by
Hydrogen in energy transition: A review
Kovač, A., Paranos, M., & Marciuš, D. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.11.256 · Cited by 1,214
Materials for hydrogen-based energy storage – past, recent progress and future outlook
Hirscher, M., Yartys, V. A., Baricco, M., Bellosta von Colbe, J., Blanchard, D., Bowman, R. C., Broom, D. P., Buckley, C. E., Chang, F., Chen, P., et al. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.153548 · Cited by 949
Zhang, L., Jia, C., Bai, F., Wang, W., An, S., Zhao, K., Li, Z., Li, J., & Sun, H. (2024) · Fuel · doi:10.1016/j.fuel.2023.129455 · Cited by 659
Global hydrogen development - A technological and geopolitical overview
Lebrouhi, B. E., Djoupo, J. J., Lamrani, B., Benabdelaziz, K., & Kousksou, T. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.12.076 · Cited by 551
Large-scale compressed hydrogen storage as part of renewable electricity storage systems
Elberry, A. M., Thakur, J., Santasalo-Aarnio, A., & Larmi, M. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.02.080 · Cited by 515
Hydrogen supply chain and challenges in large-scale LH2 storage and transportation
Ratnakar, R. R., Gupta, N., Zhang, K., van Doorne, C., Fesmire, J., Dindoruk, B., & Balakotaiah, V. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.05.025 · Cited by 439
Muhammed, N. S., Gbadamosi, A. O., Epelle, E. I., Abdulrasheed, A. A., Haq, B., Patil, S., Al-Shehri, D., & Kamal, M. S. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109207 · Cited by 307
A Review of The Methanol Economy: The Fuel Cell Route
Simon Araya, S., Liso, V., Cui, X., Li, N., Zhu, J., Sahlin, S. L., Jensen, S. H., Nielsen, M. P., & Kær, S. K. (2020) · Energies · doi:10.3390/en13030596 · Cited by 298
Hydrogen refueling station: Overview of the technological status and research enhancement
Genovese, M., & Fragiacomo, P. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.106758 · Cited by 278
Hydrogen Fuel Cell Vehicles: Opportunities and Challenges
Hassan, Q., Azzawi, I. D. J., Sameen, A. Z., & Salman, H. M. (2023) · Sustainability · doi:10.3390/su151511501 · Cited by 263
Bosu, S., & Rajamohan, N. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.01.344 · Cited by 262
Recent Progress Using Solid-State Materials for Hydrogen Storage: A Short Review
Lee, S.-Y., Lee, J.-H., Kim, Y.-H., Kim, J.-W., Lee, K.-J., & Park, S.-J. (2022) · Processes · doi:10.3390/pr10020304 · Cited by 229
Strategies to recover and minimize boil-off losses during liquid hydrogen storage
Morales-Ospino, R., Celzard, A., & Fierro, V. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113360 · Cited by 216
Self-citation(2020) · doi:10.1016/j.ijhydene.2020.06.021 · Cited by 169
High pressure ammonia decomposition on Ru-K/CaO catalysts
Sayas, S., Morlanés, N., Katikaneni, S. P., Harale, A., Solami, B., & Gascon, J. (2020) · Catalysis Science & Technology · doi:10.1039/d0cy00686f · Cited by 163
Escamilla, A., Sánchez, D., & García-Rodríguez, L. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.03.238 · Cited by 143
(2020) · doi:10.1016/j.carbon.2020.01.099 · Cited by 44
Self-citation(2022) · doi:10.1016/j.apenergy.2022.119628 · Cited by 23
Self-citation
Metadata
- Authors
- Sdanghi, G., Maranzana, G., Celzard, A., & Fierro, V.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 102
- Pages
- 150-170
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W2905372326
- Cited by
- 443
- References
- 127
- FWCI
- 7.59
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.