Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 221

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Degradation of excavated polyethylene and polypropylene waste from landfill

Open access
Canopoli, Luisa, Coulon, Frédéric, Wagland, Stuart T. · 2020 · Science of The Total Environment

Abstract

In 2016, it was estimated that 7.4 million tonnes of plastic waste have been disposed in landfill in Europe. This waste represents an important opportunity for resource recovery through enhanced landfill mining consistent with recent Circular Economy initiatives. However, a recent review found a lack of data describing the degradation of excavated plastic waste and the potential impact on recycling products such as pyrolysis oil. In this study, the physicochemical characteristics of the main plastic types found in landfills and their implications for recovery and recycling were investigated using a combination of scanning electron microscopy energy dispersive spectroscopy (SEM-EDS), attenuated total reflectance Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). Loss of gloss was visually detected for the buried plastic waste samples (polyethylene (PE) and polypropylene (PP)) compared to fresh plastic samples. The SEM-EDS analysis further showed that oxygen was the main element related to the plastic surface alteration. The carbonyl index (CI) of plastic samples buried for >10 years was between 1.5 and 2 times higher than <10 years and fresh materials. Similarly, the degree crystallinity of the old samples (>10 years) was 2 times higher than the fresh and < 10 years samples. Based on these findings, tertiary recycling, such as pyrolysis, seems to be a convenient route for upcycling of recovered plastics from municipal solid waste landfills.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.scitotenv.2019.134125

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 39

  1. Al-Salem, 2009, Recycling and recovery routes of plastic solid waste (PSW): a review, Waste Manag., 29, 2625, 10.1016/j.wasman.2009.06.004 · DOI · Paper page
  2. Barbeş, 2014, ATR-FTIR spectrometry characterisation of polymeric materials, Rom. Rep. Phys., 66, 765
  3. Bosmans, 2013, The crucial role of waste-to-energy technologies in enhanced landfill mining: a technology review, J. Clean. Prod., 55, 10, 10.1016/j.jclepro.2012.05.032 · DOI
  4. Bosmans, 2014, Pyrolysis characteristics of excavated waste material processed into refuse derived fuel, Fuel, 122, 198, 10.1016/j.fuel.2014.01.019 · DOI
  5. Brand, 2018, Potential pollution risks of historic landfills on low-lying coasts and estuaries, WIREs Water, 5, e1264, 10.1002/wat2.1264 · DOI
  6. Breyer, 2017, Production of an alternative fuel by the co-pyrolysis of landfill recovered plastic wastes and used lubrication oils, Waste Manag., 60, 363, 10.1016/j.wasman.2016.12.011 · DOI
  7. Butler, 2011, Waste polyolefins to liquid fuels via pyrolysis: review of commercial state-of-the-art and recent laboratory research, Waste Biomass Valorization, 2, 227, 10.1007/s12649-011-9067-5 · DOI · Paper page
  8. Canopoli, 2018, Physico-chemical properties of excavated plastic from landfill mining and current recycling routes, Waste Manag., 76, 55, 10.1016/j.wasman.2018.03.043 · DOI
  9. Czajczyńska, 2017, Potentials of pyrolysis processes in the waste management sector, TSEP, 3, 171
  10. Elanmugilan, 2013, Aging of low-density polyethylene in natural weather, underground soil aging and sea water: effect of a starch-based prodegradant additive, Polym. Eng. Sci., 53, 2389, 10.1002/pen.23494 · DOI
  11. Fotopoulou, 2019, Degradation of various plastics in the environment, vol. 78, 78
  12. Fox, 2019, Process targeting: an energy based comparison of waste plastic processing technologies, Energy, 170, 273, 10.1016/j.energy.2018.12.160 · DOI
  13. Frank, 2017, Compositional and physicochemical changes in waste materials and biogas production across 7 landfill sites in UK, Waste Manag., 63, 11, 10.1016/j.wasman.2016.08.026 · doi:10.1016/j.wasman.2016.08.026
  14. García, 2016, Compositional analysis of excavated landfill samples and the determination of residual biogas potential of the organic fraction, Waste Manag., 55, 336, 10.1016/j.wasman.2016.06.003 · doi:10.1016/j.wasman.2016.06.003
  15. Gijsman, 2008, Review on the thermo-oxidative degradation of polymers during processing and in service, e-Polym., 065, 1
  16. Gijsman, 1999, Comparison of the UV-degradation chemistry of polypropylene, polyethylene, polyamide 6 and polybutylene terephthalate, Polym. Degrad. Stab., 65, 433, 10.1016/S0141-3910(99)00033-6 · DOI · Paper page
  17. Gutiérrez-Gutiérrez, 2015, Rare earth elements and critical metal content of extracted landfilled material and potential recovery opportunities, Waste Manag., 42, 128, 10.1016/j.wasman.2015.04.024 · DOI
  18. Hakeem, 2018, Catalytic pyrolysis of waste polypropylene using Ahoko kaolin from Nigeria, Appl. Petrochem. Res., 8, 203, 10.1007/s13203-018-0207-8 · DOI
  19. ter Halle, 2017, To what extent are microplastics from the open ocean weathered?, Environ. Pollut., 227, 167, 10.1016/j.envpol.2017.04.051 · DOI · Paper page
  20. Jones, 2013, Enhanced landfill mining in view of multiple resource recovery: a critical review, J. Clean. Prod., 55, 45, 10.1016/j.jclepro.2012.05.021 · DOI · Paper page
  21. Liu, 1996, Catalytic reactions in waste plastics, HDPE and coal studied by high-pressure thermogravimetry with on-line GC/MS, Fuel Process. Technol., 49, 1, 10.1016/S0378-3820(97)86800-2 · DOI
  22. Longxiang, 2005, The effects of chemical structure and synthesis method on photo-degradation of polypropylene, J. Appl. Polym. Sci., 95, 270, 10.1002/app.21272 · DOI
  23. Lu, 2009, Overview of fuel properties of biomass fast pyrolysis oils, Energy Convers. Manag., 50, 1376, 10.1016/j.enconman.2009.01.001 · DOI · Paper page
  24. Malizia, 2019, Terrestrial ecologists should stop ignoring plastic pollution in the Anthropocene time, Sci. Total Environ., 668, 1025, 10.1016/j.scitotenv.2019.03.044 · DOI
  25. Moldovan, 2012, Characterization of polyolefins wastes by ftir spectroscopy, Bulletin of the Transilvania University of Brasov, Series I: Engineering Sciences, 5, 65
  26. Oblak, 2016, Mechanical properties of extensively recycled high density polyethylene, 203, 10.1007/978-3-319-21762-8_24 · DOI
  27. Quaghebeur, 2013, Characterization of landfilled materials: screening of the enhanced landfill mining potential, J. Clean. Prod., 55, 72, 10.1016/j.jclepro.2012.06.012 · DOI · Paper page
  28. Rouillon, 2016, Is carbonyl index a quantitative probe to monitor polypropylene photodegradation?, Polym. Degrad. Stab., 128, 200, 10.1016/j.polymdegradstab.2015.12.011 · DOI · Paper page
  29. Santaweesuk, 2017, The production of fuel oil by conventional slow pyrolysis using plastic waste from a municipal landfill, Int. J. Environ. Sci. Devel., 8, 168, 10.18178/ijesd.2017.8.3.941 · DOI
  30. Sel, 2016, Case study on prediction of remaining methane potential of landfilled municipal solid waste by statistical analysis of waste composition data, Waste Manag., 56, 310, 10.1016/j.wasman.2016.07.023 · doi:10.1016/j.wasman.2016.07.023
  31. Shah, 2008, Biological degradation of plastics: a comprehensive review, Biotechnol. Adv., 26, 246, 10.1016/j.biotechadv.2007.12.005 · DOI · Paper page
  32. Shamiri, 2014, The influence of Ziegler-Natta and metallocene catalysts on polyolefin structure, properties, and processing ability, Mater, 7, 5069, 10.3390/ma7075069 · DOI · Paper page
  33. Stangenberg, 2004, Quality assessments of recycled plastics by spectroscopy and chromatography, Chromatographia, 59, 101, 10.1365/s10337-003-0133-4 · DOI
  34. Turku, 2017, Characterization of plastic blends made from mixed plastics waste of different sources, Waste Manage. Res., 35, 200, 10.1177/0734242X16678066 · DOI
  35. Van Passel, 2013, The economics of enhanced landfill mining: private and societal performance drivers, J. Clean. Prod., 55, 92, 10.1016/j.jclepro.2012.03.024 · doi:10.1016/j.jclepro.2012.03.024
  36. Wagland, 2019, Developing the case for enhanced landfill mining in the UK, Detritus, in press, 10.31025/2611-4135/2019.13772 · doi:10.31025/2611-4135/2019.13772
  37. Webb, 2013, Plastic degradation and its environmental implications with special reference to poly(ethylene terephthalate), Polym, 5, 1
  38. Yang, 2014, Evidence of polyethylene biodegradation by bacterial strains from the guts of plastic-eating waxworms, Environ. Sci. Technol., 48, 13776, 10.1021/es504038a · DOI · Paper page
  39. Zhou, 2014, Characteristics and the recovery potential of plastic wastes obtained from landfill mining, J. Clean. Prod., 80, 80, 10.1016/j.jclepro.2014.05.083 · DOI · Paper page

Cited by

See all 221

Metadata

Authors
Canopoli, L., Coulon, F., & Wagland, S. T.
Venue
Science of The Total Environment
Publisher
Elsevier BV
Published
2020-01
Volume
698
Pages
134125
ISSN
0048-9697 (ISSN-L)
OpenAlex
W2970982546
Cited by
221
References
6
FWCI
17.13
Type
journal article
Language
en
Open access
hybrid
Licence
Funders
Engineering and Physical Sciences Research Council (EP/N509450/1)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.