The DOI matches its Crossref record; 133 of the 133 references it cites were found in a registry or an index.
Pyrolysis of polypropylene plastic waste into carbonaceous char: Priority of plastic waste management amidst COVID-19 pandemic
Open accessAbstract
COVID-19 global pandemic, originated from Wuhan, resulted in a massive increase in the output of polypropylene (PP)-based personal protective equipment (PPE) for healthcare workers. The continuous demand of PPE across the world caused the PP based plastic wastes accumulation. Some alternative approaches that have been practiced apart from collecting the plastic waste in the landfills are incineration approach and open burning. However, there were many drawbacks of these practices, which promote the release of chemical additives and greenhouse gases into the environment. Therefore, a proper approach in treating the plastic wastes, which introduces conversion of plastic wastes into renewable energy is paramount. Along the way of extensive research and studies, the recovery of PP plastic to fuel-like liquid oil and solid char through thermal decomposition of pyrolysis process, helps in reducing the number of PP plastic wastes and produces good quality pyrolysis liquid oil and solid char to be used in fuel applications. This paper summarizes the pyrolysis process for massively produced PP plastic wastes, type of pyrolysis used and the main pyrolysis parameters affecting the product yields. Literature studies of pyrolysis of PP plastic and several key points to optimize solid char production for PP were thoroughly elaborated in this review paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
IOP Conference Series: Earth and Environmental Science
(2020) · IOP Conference Series Earth and Environmental Science · doi:10.1088/issn.1755-1315 · Cited by 12,764
IOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
SFPE Handbook of Fire Protection Engineering
(2016) · Springer eBooks · doi:10.1007/978-1-4939-2565-0 · Cited by 3,803
Degradation rates of plastics in the environment
Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06635 · Cited by 3,463 · cited 1×
“According to some researchers (Arkatkar et al., 2009; Chamas et al., 2020), the degradation rate of plastics is very low, it takes 60 to 1000 years to degrade under natural environment.”
BackgroundA review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Ranney, M. L., Griffeth, V., & Jha, A. K. (2020) · New England Journal of Medicine · doi:10.1056/nejmp2006141 · Cited by 2,018
Panda, A. K., Singh, R. K., & Mishra, D. K. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.005 · Cited by 956
Martínez, J. D., Puy, N., Murillo, R., García, T., Navarro, M. V., & Mastral, A. M. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.02.038 · Cited by 849
Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP)
Achilias, D. S., Roupakias, C., Megalokonomos, P., Lappas, A. A., & Antonakou, Ε. V. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.06.076 · Cited by 730
Onwudili, J. A., Insura, N., & Williams, P. T. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.07.008 · Cited by 681
Verbeek, J. H., Rajamaki, B., Ijaz, S., Sauni, R., Toomey, E., Blackwood, B., Tikka, C., Ruotsalainen, J. H., & Kilinc Balci, F. S. (2020) · Cochrane Database of Systematic Reviews · doi:10.1002/14651858.cd011621.pub4 · Cited by 657
Wang, J., Shen, J., Ye, D., Yan, X., Zhang, Y., Yang, W., Li, X., Wang, J., Zhang, L., & Pan, L. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2020.114665 · Cited by 634
Slum Health: Arresting COVID-19 and Improving Well-Being in Urban Informal Settlements
Corburn, J., Vlahov, D., Mberu, B., Riley, L., Caiaffa, W. T., Rashid, S. F., Ko, A., Patel, S., Jukur, S., Martínez-Herrera, E., et al. (2020) · Journal of Urban Health · doi:10.1007/s11524-020-00438-6 · Cited by 587 · cited 1×
“Corburn et al. (2020) stated that improper landfilling and local burning of plastic and medical waste had increased Indian municipal waste issues the pandemic, and this situation aid the spread of the virus contagion.”
BackgroundPyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons
Demirbas, A. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.03.001 · Cited by 579
Mohd Nurazzi, N., Asyraf, M. R. M., Khalina, A., Abdullah, N., Sabaruddin, F. A., Kamarudin, S. H., Ahmad, S., Mahat, A. M., Lee, C. L., Aisyah, H. A., et al. (2021) · Polymers · doi:10.3390/polym13071047 · Cited by 478
Self-citationPyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products
Ahmad, I., Khan, M. I., Khan, H., Ishaq, M., Tariq, R., Gul, K., & Ahmad, W. (2015) · International Journal of Green Energy · doi:10.1080/15435075.2014.880146 · Cited by 463
Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries
Miandad, R., Rehan, M., Barakat, M. A., Aburiazaiza, A. S., Khan, H., Ismail, I. M. I., Dhavamani, J., Gardy, J., Hassanpour, A., & Nizami, A.-S. (2019) · Frontiers in Energy Research · doi:10.3389/fenrg.2019.00027 · Cited by 454
Jung, S.-H., Cho, M.-H., Kang, B.-S., & Kim, J.-S. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.10.009 · Cited by 440
Improper solid waste management increases potential for COVID-19 spread in developing countries
Nzediegwu, C., & Chang, S. X. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.104947 · Cited by 376
Interaction of Plastics in Mixed-Plastics Pyrolysis
Williams, P. T., & Williams, E. A. (1999) · Energy & Fuels · doi:10.1021/ef980163x · Cited by 360
Is incineration the terminator of plastics and microplastics?
Yang, Z., Lü, F., Zhang, H., Wang, W., Shao, L., Ye, J., & He, P. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123429 · Cited by 348
Yao, D., Zhang, Y., Williams, P. T., Yang, H., & Chen, H. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.09.035 · Cited by 347
Williams, P. T., & Slaney, E. (2007) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2006.12.002 · Cited by 343
Sharma, B. K., Moser, B. R., Vermillion, K. E., Doll, K. M., & Rajagopalan, N. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.01.019 · Cited by 322
Catalytic co-pyrolysis of biomass and polyethylene in a tandem micropyrolyzer
Xue, Y., Kelkar, A., & Bai, X. (2016) · Fuel · doi:10.1016/j.fuel.2015.10.125 · Cited by 318
Gupta, S., & Kua, H. W. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.10.095 · Cited by 307
Sakata, Y., Uddin, M. A., & Muto, A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00013-3 · Cited by 305
Chattopadhyay, J., Pathak, T. S., Srivastava, R., & Singh, A. C. (2016) · Energy · doi:10.1016/j.energy.2016.03.015 · Cited by 291
Biomedical waste management in India: Critical appraisal
Datta, P., Mohi, G., & Chander, J. (2018) · Journal of Laboratory Physicians · doi:10.4103/jlp.jlp_89_17 · Cited by 286
Verbeek, J. H., Rajamaki, B., Ijaz, S., Tikka, C., Ruotsalainen, J. H., Edmond, M. B., Sauni, R., & Kilinc Balci, F. S. (2019) · Cochrane Database of Systematic Reviews · doi:10.1002/14651858.cd011621.pub3 · Cited by 276
Adrados, A., de Marco, I., Caballero, B. M., López, A., Laresgoiti, M. F., & Torres, A. (2012) · Waste Management · doi:10.1016/j.wasman.2011.06.016 · Cited by 275
Arabiourrutia, M., Elordi, G., Lopez, G., Borsella, E., Bilbao, J., & Olazar, M. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.012 · Cited by 275
Valorization of disposable COVID-19 mask through the thermo-chemical process
Jung, S., Lee, S., Dou, X., & Kwon, E. E. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126658 · Cited by 268
Elordi, G., Olazar, M., López, G., Amutio, M., Artetxe, M., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.015 · Cited by 264
Valorization of packaging plastic waste by slow pyrolysis
Das, P., & Tiwari, P. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.025 · Cited by 264
Vesilind, P. A., Worrell, W. A., & Reinhart, D. R. (2001) · Medical Entomology and Zoology · Cited by 248
Predicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model
FakhrHoseini, S. M., & Dastanian, M. (2013) · Journal of Chemistry · doi:10.1155/2013/487676 · Cited by 239
Evaluation of pyrolysis process parameters on polypropylene degradation products
Abbas-Abadi, M. S., Haghighi, M. N., Yeganeh, H., & McDonald, A. G. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.05.023 · Cited by 235
Plasma gasification of municipal solid waste for waste-to-value processing
Munir, M. T., Mardon, I., Al-Zuhair, S., Shawabkeh, A., & Saqib, N. U. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109461 · Cited by 232
Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2019.01.009 · Cited by 230
Biochar from residual biomass as a concrete filler for improved thermal and acoustic properties
Cuthbertson, D., Berardi, U., Briens, C., & Berruti, F. (2019) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2018.11.007 · Cited by 229
Study of the pyrolysis of municipal solid waste for the production of valuable products
Velghe, I., Carleer, R., Yperman, J., & Schreurs, S. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.07.011 · Cited by 228
COVID-19 waste management: Effective and successful measures in Wuhan, China
Singh, N., Tang, Y., Zhang, Z., & Zheng, C. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.105071 · Cited by 227
Degradation of unpretreated and thermally pretreated polypropylene by soil consortia
Arkatkar, A., Arutchelvi, J., Bhaduri, S., Uppara, P. V., & Doble, M. (2009) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2008.06.005 · Cited by 221
Thermal degradation of municipal plastic waste for production of fuel-like hydrocarbons
Miskolczi, N., Bartha, L., Deák, G., & Jóver, B. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.04.025 · Cited by 219
Pyrolysis: A Sustainable Way to Generate Energy from Waste
Zaman, C. Z., Pal, K., Yehye, W. A., Sagadevan, S., Shah, S. T., Adebisi, G. A., Marliana, E., Rafique, R. F., & Johan, R. B. (2017) · Pyrolysis · doi:10.5772/intechopen.69036 · Cited by 216
Sogancioglu, M., Yel, E., & Ahmetli, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.157 · Cited by 198
Microbial Enzymatic Degradation of Biodegradable Plastics
Roohi, Bano, K., Kuddus, M., Zaheer, M. R., Zia, Q., Khan, M. F., Ashraf, G. M., Gupta, A., & Aliev, G. (2017) · Current Pharmaceutical Biotechnology · doi:10.2174/1389201018666170523165742 · Cited by 196
The effect of slow pyrolysis on the conversion of packaging waste plastics (PE and PP) into fuel
Das, P., & Tiwari, P. (2018) · Waste Management · doi:10.1016/j.wasman.2018.08.021 · Cited by 194
Akhbarizadeh, R., Dobaradaran, S., Nabipour, I., Tangestani, M., Abedi, D., Javanfekr, F., Jeddi, F., & Zendehboodi, A. (2021) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2021.112386 · Cited by 185
Torres, F. G., & De-la-Torre, G. E. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.147628 · Cited by 179
Lee, K.-H., Noh, N.-S., Shin, D.-H., & Seo, Y. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00227-6 · Cited by 178
Yan, G., Jing, X., Wen, H., & Xiang, S. (2015) · Energy & Fuels · doi:10.1021/ef502919f · Cited by 178
Pyrolysis of waste polypropylene for the synthesis of carbon nanotubes
Mishra, N., Das, G., Ansaldo, A., Genovese, A., Malerba, M., Povia, M., Ricci, D., Di Fabrizio, E., Di Zitti, E., Sharon, M., et al. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.11.012 · Cited by 176
Fluidised bed pyrolysis of polypropylene over cracking catalysts for producing hydrocarbons
Lin, Y., & Yen, H.-Y. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.01.006 · Cited by 175
Pyrolysis of virgin and waste polypropylene and its mixtures with waste polyethylene and polystyrene
Kiran Ciliz, N., Ekinci, E., & Snape, C. E. (2004) · Waste Management · doi:10.1016/j.wasman.2003.06.002 · Cited by 173
Feedstock recycling and pyrolysis of waste plastics
(2006) · Focus on Catalysts · doi:10.1016/s1351-4180(06)71853-0 · Cited by 172
Liu, J., Jiang, Z., Yu, H., & Tang, T. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.08.008 · Cited by 171
Liquid oils produced from pyrolysis of plastic wastes with heat carrier in rotary kiln
Zhang, Y., Ji, G., Chen, C., Wang, Y., Wang, W., & Li, A. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2020.106455 · Cited by 171
Al-Salem, S. M. (2019) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2019.05.008 · Cited by 169
Parku, G. K., Collard, F., & Görgens, J. F. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2020.106522 · Cited by 169
Wax Formation in the Pyrolysis of Polyolefins in a Conical Spouted Bed Reactor
Aguado, R., Olazar, M., San José, Gaisán, B., & Bilbao, J. (2002) · Energy & Fuels · doi:10.1021/ef020043w · Cited by 168
Experimental Study of Thermal and Catalytic Pyrolysis of Plastic Waste Components
Anene, A. F., Fredriksen, S. B., Sætre, K. A., & Tokheim, L.-A. (2018) · Sustainability · doi:10.3390/su10113979 · Cited by 163
Monomer recovery through advanced pyrolysis of waste high density polyethylene (HDPE)
Diaz-Silvarrey, L. S., Zhang, K., & Phan, A. N. (2018) · Green Chemistry · doi:10.1039/c7gc03662k · Cited by 162
Thermal and thermo-catalytic degradation of high-density polyethylene waste
Miskolczi, N., Bartha, L., Deák, G., Jóver, B., & Kalló, D. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.07.002 · Cited by 161
Characterization and Utilization of Char Derived from Fast Pyrolysis of Plastic Wastes
Jamradloedluk, J., & Lertsatitthanakorn, C. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.03.139 · Cited by 161
Jiang, Z., Song, R., Bi, W., Lu, J. Q., & Tang, T. (2006) · Carbon · doi:10.1016/j.carbon.2006.08.012 · Cited by 156
Graphene nanosheets derived from plastic waste for the application of DSSCs and supercapacitors
Pandey, S., Karakoti, M., Surana, K., Dhapola, P. S., SanthiBhushan, B., Ganguly, S., Singh, P. K., Abbas, A., Srivastava, A., & Sahoo, N. G. (2021) · Scientific Reports · doi:10.1038/s41598-021-83483-8 · Cited by 155
Luo, G., Suto, T., Yasu, S., & Katō, K. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00095-1 · Cited by 150
Kassargy, C., Awad, S., Burnens, G., Kahine, K., & Tazerout, M. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.09.005 · Cited by 149
Catalytic conversion of polyolefins into fuels over zeolite beta
Aguado, J., Serrano, D. P., Escola, J. M., Garagorri, E., & Fernández, J. A. L. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00023-9 · Cited by 144
Pyrolysis characteristics of polystyrene and polypropylene in a stirred batch reactor
Kim, S.-S., & Kim, S. (2003) · Chemical Engineering Journal · doi:10.1016/s1385-8947(03)00184-0 · Cited by 142
Hydrocarbon gases and oils from the recycling of polystyrene waste by catalytic pyrolysis
Williams, P. T., & Bagri, R. (2003) · International Journal of Energy Research · doi:10.1002/er.949 · Cited by 133
Untapped conversion of plastic waste char into carbon-metal LDOs for the adsorption of Congo red
Miandad, R., Kumar, R., Barakat, M. A. E.-F., Basheer, C., Aburiazaiza, A. S., Nizami, A., & Rehan, M. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.10.029 · Cited by 133
Zhou, J., Gui, B., Qiao, Y., Zhang, J., Wang, W., Yao, H., Yu, Y., & Xu, M. (2015) · Fuel · doi:10.1016/j.fuel.2015.11.034 · Cited by 132
Duan, D., Wang, Y., Dai, L., Ruan, R. R., Zhao, Y., Fan, L., Tayier, M., & Liu, Y. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.04.104 · Cited by 132
Thermal degradation of medical plastic waste by in-situ FTIR, TG-MS and TG-GC/MS coupled analyses
Qin, L., Han, J., Zhao, B., Wang, Y., Chen, W., & Xing, F. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.10.012 · Cited by 130
Sajdak, M., & Muzyka, R. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.03.011 · Cited by 123
Serrano, D. P., Aguado, J., Escola, J. M., & Garagorri, E. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00153-4 · Cited by 121
Continuous Polyolefin Cracking on an HZSM-5 Zeolite Catalyst in a Conical Spouted Bed Reactor
Elordi, G., Olazar, M., López, G., Artetxe, M., & Bilbao, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2002999 · Cited by 121
Biochar as an alternative sustainable platform for sensing applications: A review
Spanu, D., Binda, G., Dossi, C., & Monticelli, D. (2020) · Microchemical Journal · doi:10.1016/j.microc.2020.105506 · Cited by 118
Chaudhary, S., Kumari, M., Chauhan, P., & Ram Chaudhary, G. (2021) · Waste Management · doi:10.1016/j.wasman.2020.10.038 · Cited by 114 · cited 2×
“…for fabrication of graphene and its derivatives (Miandad et al., 2019), nanocatalysts, adsorbent materials, nano-fillers for composite application (Sogancioglu et al., 2020), sensors (Chaudhary et al., 2021; Spanu et al., 2020) and supercapacitors (Pandey et al., 2021; Vivekanandhan, 2018).”
BackgroundSantos, B. P. S., Almeida, D., Marques, M. D. F. V., & Henriques, C. A. (2017) · Fuel · doi:10.1016/j.fuel.2017.11.104 · Cited by 114
Epoxy composites based on inexpensive char filler obtained from plastic waste and natural resources
Ahmetli, G., Kocaman, S., Özaytekin, İ., & Bozkurt, P. A. (2013) · Polymer Composites · doi:10.1002/pc.22452 · Cited by 112
Thermal Decomposition of Polymeric Materials
Witkowski, A., Stec, A. A., & Hull, T. R. (2015) · Springer eBooks · doi:10.1007/978-1-4939-2565-0_7 · Cited by 109
Activator-assisted pyrolysis of polypropylene
Park, K.-B., Jeong, Y.-S., & Kim, J.-S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113558 · Cited by 108
Study of the catalytic pyrolysis behaviour of polyethylene–polypropylene mixtures
Marcilla, A. F., Garcia-Quesada, J. C., Sánchez, S., & Ruiz‐Femenia, R. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.10.005 · Cited by 104
On deconvolution for understanding synergistic effects in co-pyrolysis of pinewood and polypropylene
Liu, X., Burra, K. R. G., Wang, Z., Li, J., Che, D., & Gupta, A. K. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115811 · Cited by 103
Effects of plastic wastes on coal pyrolysis behaviour and the structure of semicokes
Vivero, L., Barriocanal, C., Álvarez, R., & Diez, M. A. (2005) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.08.006 · Cited by 102
Adnan, A., Shah, J., & Jan, M. R. (2015) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2015.01.015 · Cited by 99
Thermo-catalytic pyrolysis of polystyrene in the presence of zinc bulk catalysts
Adnan, A., Shah, J., & Jan, M. R. (2014) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2014.05.011 · Cited by 97
Fast co-pyrolysis of cellulose and polypropylene using Py-GC/MS and Py-FT-IR
Ojha, D. K., & Vinu, R. (2015) · RSC Advances · doi:10.1039/c5ra10820a · Cited by 93
Pyrolysis of Polypropylene in a Nitrogen Plasma Reactor
Tang, L., Huang, H., Zhao, Z., Wu, C., & Chen, Y. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020469y · Cited by 90
Carbon nanotubes synthetized from gaseous products of waste polymer pyrolysis and their application
Borsodi, N., Szentes, A., Miskolczi, N., Wu, C., & Liu, X. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.05.018 · Cited by 86
Characterization and use of char produced from pyrolysis of post-consumer mixed plastic waste
Martín-Lara, M. A., Piñar, A., Ligero, A., Blázquez, G., & Calero, M. (2021) · Water · doi:10.3390/w13091188 · Cited by 85
Wong, H., & Broadbelt, L. J. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010171s · Cited by 85
Production of Biochar, Bio-Oil and Synthesis Gas from Cashew Nut Shell by Slow Pyrolysis
Moreira, R., Orsini, R. D. R., Vaz, J. M., Penteado, J. C. P., & Spinace, E. V. (2016) · Waste and Biomass Valorization · doi:10.1007/s12649-016-9569-2 · Cited by 85
Lee, S., Yoshida, K., & Yoshikawa, K. (2015) · Energy and Environment Research · doi:10.5539/eer.v5n1p18 · Cited by 81
Veksha, A., Giannis, A., Oh, W., Chang, V. W.-C., & Lisak, G. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2017.10.019 · Cited by 80
Pyrolytic liquid fuel: A source of renewable electricity generation in Makkah
Rehan, M., Nizami, A., Shahzad, K., Ouda, O. K. M., Ismail, I. M. I., Almeelbi, T. B., Iqbal, T., & Demirbaş, A. (2016) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2016.1153753 · Cited by 69
Kalargaris, I., Tian, G., & Gu, S. (2017) · Fuel · doi:10.1016/j.fuel.2017.09.101 · Cited by 69
Wijesekara, D. A., Sargent, P., Ennis, C. J., & Hughes, D. J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128212 · Cited by 66
Jain, S., Lamba, B. Y., Kumar, S., & Singh, D. (2020) · Biofuels · doi:10.1080/17597269.2020.1797350 · Cited by 63
Behaviour of waste polypropylene pyrolysis char-based epoxy composite materials
Sogancioglu, M., Yel, E., & Ahmetli, G. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-07028-3 · Cited by 62
Non-thermal plasma-assisted hydrogenolysis of polyethylene to light hydrocarbons
Yao, L., King, J. A., Wu, D., Chuang, S. S. C., & Peng, Z. (2020) · Catalysis Communications · doi:10.1016/j.catcom.2020.106274 · Cited by 62
Montoya, V. H., & Bonilla‐Petriciolet, A. (2012) · InTech eBooks · doi:10.5772/3346 · Cited by 61
Santaweesuk, C., & Janyalertadun, A. (2016) · International Journal of Environmental Science and Development · doi:10.18178/ijesd.2017.8.3.941 · Cited by 60
Slow pyrolysis of an LDPE/PP mixture: Kinetics and process performance
Maniscalco, M., Paglia, F. L., Iannotta, P., Caputo, G., Scargiali, F., Grisafi, F., & Brucato, A. (2021) · Journal of the Energy Institute · doi:10.1016/j.joei.2021.03.006 · Cited by 58
Harussani, M. M., Sapuan, S. M., Rashid, U., & Khalina, A. (2021) · Polymers · doi:10.3390/polym13111707 · Cited by 58
Self-citationPressurized carbonization of mixed plastics into porous carbon sheets on magnesium oxide
Ma, J., Liu, J., Song, J., & Tang, T. (2018) · RSC Advances · doi:10.1039/c7ra12733b · Cited by 50
Palos, R., Gutiérrez, A., Vela, F. J., Maña, J. A., Hita, I., Asueta, A., Arnaiz, S., Arandes, J. M., & Bilbao, J. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.104668 · Cited by 49
Thermal utilization (treatment) of plastic waste
Bujak, J. W. (2015) · Energy · doi:10.1016/j.energy.2015.06.106 · Cited by 48
Catalytic co-pyrolysis of polypropylene and Laminaria japonica over zeolitic materials
Kim, Y., Lee, H. W., Choi, S. J., Jeon, J., Park, S. H., Jung, S., Kim, S. C., & Park, Y. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.04.139 · Cited by 48
Generalized van der Waals-Berthelot equation of state
Sobko, A. A. (2008) · Doklady Physics · doi:10.1134/s1028335808080028 · Cited by 47
Ryu, S., Lee, H. W., Kim, Y., Jae, J., Jung, S., Ha, J., & Park, Y. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.145521 · Cited by 47
Kairytė, A., Kremensas, A., Vaitkus, S., Członka, S., & Strąkowska, A. (2020) · Polymers · doi:10.3390/polym12030683 · Cited by 45
Effect of carbon nanotubes on thermal pyrolysis of high density polyethylene and polypropylene
Gutiérrez, O., & Palza, H. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.06.014 · Cited by 42
Hongthong, S., Leese, H. S., & Chuck, C. J. (2020) · ACS Omega · doi:10.1021/acsomega.0c02854 · Cited by 42
Plastic waste fuelled solid oxide fuel cell system for power and carbon nanotube cogeneration
Cai, W., Liu, P., Chen, B., Xu, H., Liu, Z., Zhou, Q., Yu, F., Liu, M., Chen, M., Liu, J., et al. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.11.159 · Cited by 39
Sarker, M., Mcic, Ficer, MInstP, Mrsc, & Farss. (2013) · Cited by 37
Low-Temperature Co-pyrolysis of Polypropylene and Coffee Wastes to Fuels
Zanella, E., Zassa, M. D., Navarini, L., & Canu, P. (2013) · Energy & Fuels · doi:10.1021/ef301305x · Cited by 36
Chhabra, V., Bambery, K. R., Bhattacharya, S., & Shastri, Y. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.10.045 · Cited by 36
Pyrolysis Oil Stabilisation by Catalytic Hydrotreatment
Venderbosch, R. H., & Heeres, H. J. (2011) · InTech eBooks · doi:10.5772/18446 · Cited by 35
Nileshkumar, K. D., Jani, R. J., Patel, T. M., & Rathod, G. P. (2015) · International Journal For Science Technology And Engineering · Cited by 32
Activation of waste tire char by cyclic liquid-phase oxidation
Heras, F., Jimenez-Cordero, D., Gilarranz, M. A., Alonso-Morales, N., & Rodriguez, J. J. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.06.018 · Cited by 30 · cited 1×
“Several researchers activated the char via steam and thermal activation to enhance the Brunauer–Emmett–Teller (BET) surface area and lower the pore size of the char (Heras et al., 2014).”
BackgroundBernardo, M. (2011) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 24
Biochar Supercapacitors: Recent Developments in the Materials and Methods
Vivekanandhan, S. (2018) · Wiley eBooks · doi:10.1002/9781119528463.ch10 · Cited by 22
Thermal Pyrolysis of Polypropylene Plastic Waste into Liquid Fuel: Reactor Performance Evaluation
Martynis, M., Mulyazmi, Winanda, E., & Harahap, A. N. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/543/1/012047 · Cited by 22
Combustion of char from plastic wastes pyrolysis
Saptoadi, H., Rohmat, T. A., & Sutoyo, S. (2016) · AIP conference proceedings · doi:10.1063/1.4949286 · Cited by 17
Miranda, R., Sosa, C., Bustos, D., Carrillo, E., & Rodrguez-Cant, M. (2012) · Lignocellulosic Precursors Used in the Synthesis of Activated Carbon - Characterization Techniques and Applications in the Wastewater Treatment · doi:10.5772/39368 · Cited by 12
Inman, M. (2012) · Nature Climate Change · doi:10.1038/nclimate1466 · Cited by 7
Novarini, Rusdianasari, R., Bow, Y., & Kurniawan, S. (2021) · Atlantis highlights in engineering/Atlantis Highlights in Engineering · doi:10.2991/ahe.k.210205.005 · Cited by 6
Cited by
Suriani, M. J., Ilyas, R. A., Zuhri, M. Y. M., Khalina, A., Sultan, M. T. H., Sapuan, S. M., Ruzaidi, C. M., Wan, F. N., Zulkifli, F., Harussani, M. M., et al. (2021) · Polymers · doi:10.3390/polym13203514 · Cited by 285
Self-citationWaste Management and the Perspective of a Green Hospital—A Systematic Narrative Review
Lattanzio, S., Stefanizzi, P., D’ambrosio, M., Cuscianna, E., Riformato, G., Migliore, G., Tafuri, S., & Bianchi, F. P. (2022) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph192315812 · Cited by 118
“This method reduces PP plastic waste and produces pyrolysis liquid oil and solid char to be used in fuel applications [37].”
MethodStructure-oriented conversions of plastics to carbon nanomaterials
Ren, S., Xu, X., Hu, K., Tian, W., Duan, X., Yi, J., & Wang, S. (2022) · Carbon Research · doi:10.1007/s44246-022-00016-2 · Cited by 98
Yang, Y., Jalalah, M., Alsareii, S. A., Harraz, F. A., Thakur, N., Zheng, Y., Koutb, M., Yoon, Y., & Salama, E.-S. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.112926 · Cited by 65
Chasioti, A., & Zabaniotou, A. (2024) · Sustainability · doi:10.3390/su16145852 · Cited by 15
Metadata
- Authors
- Harussani, M. M., Sapuan, S. M., Rashid, U., Khalina, A., & Ilyas, R. A.
- Venue
- Science of The Total Environment
- Publisher
- Elsevier BV
- Published
- 2022-01
- Volume
- 803
- Pages
- 149911
- ISSN
- 0048-9697 (ISSN-L)
- OpenAlex
- W3194906783
- Cited by
- 255
- References
- 133
- FWCI
- 12.04
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.