In situ nitrogen functionalization of biochar via one-pot synthesis for catalytic peroxymonosulfate activation: Characteristics and performance studies
The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
A facile and scalable one-pot synthesis method was designed to fabricate N-doped biochar from wood residue for peroxymonosulfate (PMS) activation. The urea:wood residue w/w ratio was varied from 0:1 to 100:1, and the intrinsic (surface chemistry) and extrinsic (morphology, specific surface area, etc.) properties of the N-doped biochar were systematically investigated. Notably, the urea:wood residue w/w ratio played a significant role in tuning the N species composition in the N-doped biochar. A higher urea:wood residue w/w ratio resulted in greater at.% of graphitic N and higher specific surface area. The results show that the catalyst prepared with urea:wood residue w/w ratio of 100:1 (NC800-20) manifested the greatest catalytic activity as PMS activator for organics removal due to its highly favorable combination of intrinsic (highest at.% graphitic N) and extrinsic (excellent specific surface area) properties. The catalyst loading, PMS dosage and pH were found to be operationally crucial for PMS activation. Under the best condition, the NC800-20 can be used to degrade various organic pollutants. The recyclability of NC800-20 was studied and while the catalytic activity gradually deteriorated over successive cycles, it can be completely restored by simple calcination at 500 °C. The used catalyst was extensively characterized, revealing insights into the mechanism of PMS activation. The prevailing mechanism for PMS activation was the nonradical pathway. Overall, this research provides insights into preparing N-doped biochar with favorable extrinsic and intrinsic properties from biowaste for sustainable pollutant removal via PMS activation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Wang, J., & Wang, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.059 · Cited by 4,087
Rate Constants for Reactions of Inorganic Radicals in Aqueous Solution
Neta, P., Huie, R. E., & Ross, A. B. (1988) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555808 · Cited by 3,651
Wang, H., Maiyalagan, T., & Wang, X. (2012) · ACS Catalysis · doi:10.1021/cs200652y · Cited by 3,618
Preparation, modification and environmental application of biochar: A review
Wang, J., & Wang, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.282 · Cited by 2,345
Nitrogen-doped carbon materials
Inagaki, M., Toyoda, M., Soneda, Y., & Morishita, T. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.024 · Cited by 867
Yu, J., Tang, L., Pang, Y., Zeng, G., Wang, J., Deng, Y., Liu, Y., Feng, H., Chen, S., & Ren, X. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.01.163 · Cited by 552
Unveiling the active sites of graphene-catalyzed peroxymonosulfate activation
Duan, X., Sun, H., Ao, Z., Zhou, L., Wang, G., & Wang, S. (2016) · Carbon · doi:10.1016/j.carbon.2016.06.016 · Cited by 498
Oh, W.-D., & Lim, T.-T. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.203 · Cited by 334
Self-citationChen, X., Duan, X., Oh, W.-D., Zhang, P.-H., Guan, C.-T., Zhu, Y.-A., & Lim, T.-T. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.04.018 · Cited by 232
Self-citation
Cited by
Kohantorabi, M., Moussavi, G., & Giannakis, S. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127957 · Cited by 975
Zhao, C., Shao, B., Yan, M., Liu, Z., Liang, Q., He, Q., Wu, T., Liu, Y., Pan, Y., Huang, J., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128829 · Cited by 518
Customised fabrication of nitrogen-doped biochar for environmental and energy applications
Wan, Z., Sun, Y., Tsang, D. C. W., Khan, E., Yip, A. C. K., Ng, Y. H., Rinklebe, J., & Ok, Y. S. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126136 · Cited by 321
Kasera, N., Kolar, P., & Hall, S. G. (2022) · Biochar · doi:10.1007/s42773-022-00145-2 · Cited by 254
Advanced oxidation processes for the removal of mono and polycyclic aromatic hydrocarbons—A review
Rayaroth, M. P., Marchel, M., & Boczkaj, G. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.159043 · Cited by 158
Gasim, M. F., Choong, Z.-Y., Koo, P.-L., Low, S.-C., Abdurahman, M.-H., Ho, Y.-C., Mohamad, M., Suryawan, I. W. K., Lim, J.-W., & Oh, W.-D. (2022) · Catalysts · doi:10.3390/catal12020210 · Cited by 76
“Due to its matching atomic radius yet different electronegativity, N is the prevalent heteroatom in doping biochar, especially for catalysis [30,32].”
BackgroundSelf-citationMumtaz, M., Baqar, Z., Hussain, N., Afifa, Bilal, M., Azam, H. M. H., Baqir, Q.-U.-A., & Iqbal, H. M. N. (2022) · Fuel · doi:10.1016/j.fuel.2021.122840 · Cited by 71
Hung, C.-M., Chen, C.-W., Huang, C.-P., & Dong, C.-D. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106420 · Cited by 38
Metadata
- Authors
- Zaeni, J. R. J., Lim, J.-W., Wang, Z., Ding, D., Chua, Y.-S., Ng, S.-L., & Oh, W.-D.
- Venue
- Separation and Purification Technology
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 241
- Pages
- 116702
- ISSN
- 1383-5866 (ISSN-L)
- OpenAlex
- W3006121217
- Cited by
- 123
- References
- 11
- FWCI
- 6.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.