The DOI matches its Crossref record; 89 of the 89 references it cites were found in a registry or an index.
Evolution of 3D printed soft actuators
Open accessAbstract
Developing soft actuators and sensors by means of 3D printing has become an exciting research area. Compared to conventional methods, 3D printing enables rapid prototyping, custom design, and single-step fabrication of actuators and sensors that have complex structure and high resolution. While 3D printed sensors have been widely reviewed in the literature, 3D printed actuators, on the other hand, have not been adequately reviewed thus far. This paper presents a comprehensive review of the existing 3D printed actuators. First, the common processes used in 3D printing of actuators are reviewed. Next, the existing mechanisms used for stimulating the printed actuators are described. In addition, the materials used to print the actuators are compared. Then, the applications of the printed actuators including soft-manipulation of tissues and organs in biomedicine and fragile agricultural products, regenerative design, smart valves, microfluidic systems, electromechanical switches, smart textiles, and minimally invasive surgical instruments are explained. After that, the reviewed 3D printed actuators are discussed in terms of their advantages and disadvantages considering power density, elasticity, strain, stress, operation voltage, weight, size, response time, controllability, and biocompatibility. Finally, the future directions of 3D printed actuators are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of shape memory alloy research, applications and opportunities
Mohd Jani, J., Leary, M., Subic, A., & Gibson, M. A. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.084 · Cited by 4,078
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
A review of piezoelectric polymers as functional materials for electromechanical transducers
Ramadan, K. S., Sameoto, D., & Evoy, S. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/3/033001 · Cited by 1,060
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Research works printed but not linked: 19
- Yu, 2015, Oxygen reduction reaction induced pH-responsive chemo-mechanical hydrogel actuators, Soft Matter, 11, 7953, 10.1039/C5SM01892G · doi:10.1039/c5sm01892g
- Mitsumata, 2005, Giant complex modulus reduction of κ‐carrageenan magnetic gels, Macromol. Rapid Commun., 26, 1538, 10.1002/marc.200500405 · doi:10.1002/marc.200500405
- Kerdlapee, 2014, Fabrication of electrostatic MEMS microactuator based on X-ray lithography with Pb-based X-ray mask and dry-film-transfer-to-PCB process, Microsyst. Technol., 20, 127, 10.1007/s00542-013-1816-x · doi:10.1007/s00542-013-1816-x
- Rosochowski, 2000, Rapid tooling: the state of the art, J. Mater. Process. Technol., 106, 191, 10.1016/S0924-0136(00)00613-0 · doi:10.1016/s0924-0136(00)00613-0
- Dippenaar, 2013, 3D printed tooling for vacuum-assisted resin transfer moulding, Int. J. Adv. Manuf. Technol., 64, 755, 10.1007/s00170-012-4034-2 · doi:10.1007/s00170-012-4034-2
- Bartolo, 2003, Stereo-thermal-lithography: a new principle for rapid prototyping, Rapid Prototyping J., 9, 150, 10.1108/13552540310477454 · doi:10.1108/13552540310477454
- P. Walters, D. McGoran, Digital fabrication of smart structures and mechanisms-creative applications in art and design, In: NIP & Digital Fabrication Conference, Society for Imaging Science and Technology. (2011). · doi:10.2352/issn.2169-4451.2011.27.1.art00047_1
- Meisel, 2015, A procedure for creating actuated joints via embedding shape memory alloys in PolyJet 3D printing, J. Intell. Mater. Syst. Struct., 26, 1498, 10.1177/1045389X14544144 · doi:10.1177/1045389x14544144
- Hwang, 2015, Pneumatic microfinger with balloon fins for linear motion using 3D printed molds, Sens. Actuators A, 234, 65, 10.1016/j.sna.2015.08.008 · doi:10.1016/j.sna.2015.08.008
- Slightam, 2012, Novel integrated fluid-power actuators for functional end-use components and systems via selective laser sintering Nylon 12, 23rd Ann. Int. Solid Freeform Fabrication Symp.
- Cai, 2016, 4D printing of soft robotic facial muscles, 2016 Ann. Int. Solid Free Form Fabrication Symp.
- Y. Bar-Cohen, T. McKay, P. Walters, J. Rossiter, B.O’Brien, I. Anderson, 3-dimensional fabrication of soft energy harvesters, 2013, 8687: 86870J. · doi:10.1117/12.2009919
- McDaid, 2012, A compliant surgical robotic instrument with integrated IPMC sensing and actuation, Int. J. Smart Nano Mater., 3, 188, 10.1080/19475411.2011.650231 · doi:10.1080/19475411.2011.650231
- O’Brien, 2008, An experimentally validated model of a dielectric elastomer bending actuator, The 15th International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, International Society for Optics and Photonics
- Cauda, 2015, Nanostructured piezoelectric polymers, J. Appl. Polym. Sci., 132, 10.1002/app.41667 · doi:10.1002/app.41667
- Pabst, 2013, All inkjet-printed electroactive polymer actuators for microfluidic lab-on-chip systems, SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, International Society for Optics and Photonics, 10.1117/12.2009605 · doi:10.1117/12.2009605
- Pabst, 2014, Inkjet printed micropump actuator based on piezoelectric polymers: device performance and morphology studies, Org. Electron., 15, 3306, 10.1016/j.orgel.2014.09.007 · doi:10.1016/j.orgel.2014.09.007
- Lipton, 2016, 3D printing variable stiffness foams using viscous thread instability, Sci. Rep., 6, 29996, 10.1038/srep29996 · doi:10.1038/srep29996
- Ross, 2013, A model to measure surgical outflow using a two-tubed experimental glaucoma drainage device, Invest. Ophthalmol., 54
Cited by
Current and future trends in topology optimization for additive manufacturing
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1994-3 · Cited by 870
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
3D printing of robotic soft actuators with programmable bioinspired architectures
Schaffner, M., Faber, J. A., Pianegonda, L., Rühs, P. A., Coulter, F., & Studart, A. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03216-w · Cited by 518
3D printing for soft robotics – a review
Gul, J. Z., Sajid, M., Rehman, M. M., Siddiqui, G. U., Shah, I., Kim, K.-H., Lee, J.-W., & Choi, K. H. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1431862 · Cited by 428
Bioinspired Polymer Systems with Stimuli-Responsive Mechanical Properties
Montero de Espinosa, L., Meesorn, W., Moatsou, D., & Weder, C. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00168 · Cited by 415
3D Printing Materials for Soft Robotics
Sachyani Keneth, E., Kamyshny, A., Totaro, M., Beccai, L., & Magdassi, S. (2021) · Advanced Materials · doi:10.1002/adma.202003387 · Cited by 356
3D printing of functional microrobots
Li, J., & Pumera, M. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01062f · Cited by 303
Soft Sensors and Actuators for Wearable Human–Machine Interfaces
Park, J., Lee, Y., Cho, S., Choe, A., Yeom, J., Ro, Y. G., Kim, J., Kang, D.-H., Lee, S., & Ko, H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00356 · Cited by 272
Two-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview
Scalet, G. (2020) · Actuators · doi:10.3390/act9010010 · Cited by 209
“While several examples, such as grippers and drug delivery systems, employ one-way SMPs (see [13,178,218,219] and references therein), applications based on the multiple-way SME are still limited.”
BackgroundMethodReview of 4D printing materials and their properties
Shin, D.-G., Kim, T.-H., & Kim, D.-E. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0040-z · Cited by 183
4D printing of polyurethane paint-based composites
Su, J.-W., Gao, W., Trinh, K., Kenderes, S. M., Tekin Pulatsu, E., Zhang, C., Whittington, A., Lin, M., & Lin, J. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1618409 · Cited by 81
Metadata
- Authors
- Zolfagharian, A., Kouzani, A. Z., Khoo, S. Y., Moghadam, A. A. A., Gibson, I., & Kaynak, A.
- Venue
- Sensors and Actuators A: Physical
- Publisher
- Elsevier BV
- Published
- 2016-10
- Volume
- 250
- Pages
- 258-272
- ISSN
- 0924-4247 (ISSN-L)
- OpenAlex
- W2528496775
- Cited by
- 314
- References
- 89
- FWCI
- 12.01
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.