The DOI matches its Crossref record; 89 of the 89 references it cites were found in a registry or an index.
Evolution of 3D printed soft actuators
Open accessAbstract
Developing soft actuators and sensors by means of 3D printing has become an exciting research area. Compared to conventional methods, 3D printing enables rapid prototyping, custom design, and single-step fabrication of actuators and sensors that have complex structure and high resolution. While 3D printed sensors have been widely reviewed in the literature, 3D printed actuators, on the other hand, have not been adequately reviewed thus far. This paper presents a comprehensive review of the existing 3D printed actuators. First, the common processes used in 3D printing of actuators are reviewed. Next, the existing mechanisms used for stimulating the printed actuators are described. In addition, the materials used to print the actuators are compared. Then, the applications of the printed actuators including soft-manipulation of tissues and organs in biomedicine and fragile agricultural products, regenerative design, smart valves, microfluidic systems, electromechanical switches, smart textiles, and minimally invasive surgical instruments are explained. After that, the reviewed 3D printed actuators are discussed in terms of their advantages and disadvantages considering power density, elasticity, strain, stress, operation voltage, weight, size, response time, controllability, and biocompatibility. Finally, the future directions of 3D printed actuators are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of shape memory alloy research, applications and opportunities
Mohd Jani, J., Leary, M., Subic, A., & Gibson, M. A. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.084 · Cited by 4,078
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
A review of piezoelectric polymers as functional materials for electromechanical transducers
Ramadan, K. S., Sameoto, D., & Evoy, S. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/3/033001 · Cited by 1,060
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
A comparison of rapid prototyping technologies
Pham, D. T., & Gault, R. S. (1998) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(97)00137-5 · Cited by 915
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 726
Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery
Gao, Q., He, Y., Fu, J.-Z., Liu, A., & Ma, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.031 · Cited by 630
Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., Williams, P., Brancazio, D., & Cornie, J. (1992) · Journal of Engineering for Industry · doi:10.1115/1.2900701 · Cited by 573
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
Self-folding of polymer sheets using local light absorption
Liu, Y., Boyles, J. K., Genzer, J., & Dickey, M. D. (2012) · Soft Matter · doi:10.1039/c1sm06564e · Cited by 523
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
Le Duigou, A., Castro, M., Bevan, R., & Martin, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.018 · Cited by 523
Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers
Mao, Y., Yu, K., Isakov, M. S., Wu, J., Dunn, M. L., & Jerry Qi, H. (2015) · Scientific Reports · doi:10.1038/srep13616 · Cited by 510
Biomedical applications of thermally activated shape memory polymers
Small, IV, Singhal, P., Wilson, T. S., & Maitland, D. J. (2010) · Journal of Materials Chemistry · doi:10.1039/b923717h · Cited by 450
Reversible patterning and actuation of hydrogels by electrically assisted ionoprinting
Palleau, E., Morales, D., Dickey, M. D., & Velev, O. D. (2013) · Nature Communications · doi:10.1038/ncomms3257 · Cited by 445
Three-dimensionally printed biological machines powered by skeletal muscle
Cvetkovic, C., Raman, R., Chan, V., Williams, B. J., Tolish, M., Bajaj, P., Sakar, M. S., Asada, H. H., Saif, M. T. A., & Bashir, R. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1401577111 · Cited by 443
Tough Al-alginate/Poly(N-isopropylacrylamide) Hydrogel with Tunable LCST for Soft Robotics
Zheng, W. J., An, N., Yang, J. H., Zhou, J., & Chen, Y. M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507339r · Cited by 433
Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting
Skardal, A., Zhang, J., McCoard, L., Xu, X., Oottamasathien, S., & Prestwich, G. D. (2010) · Tissue Engineering Part A · doi:10.1089/ten.tea.2009.0798 · Cited by 424
Multi-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
The manufacturing of hard tools from metallic powders by selective laser melting
Abe, F., Osakada, K., Shiomi, M., Uematsu, K., & Matsumoto, M. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00522-2 · Cited by 390
3D Optical Printing of Piezoelectric Nanoparticle–Polymer Composite Materials
Kim, K., Zhu, W., Qu, X., Aaronson, C., McCall, W. R., Chen, S., & Sirbuly, D. J. (2014) · ACS Nano · doi:10.1021/nn503268f · Cited by 374
The rapid prototyping technologies
Upcraft, S., & Fletcher, R. (2003) · Assembly Automation · doi:10.1108/01445150310698634 · Cited by 367
Electro-actuated hydrogel walkers with dual responsive legs
Morales, D., Palleau, E., Dickey, M. D., & Velev, O. D. (2014) · Soft Matter · doi:10.1039/c3sm51921j · Cited by 366
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Self-folding all-polymer thermoresponsive microcapsules
Stoychev, G., Puretskiy, N., & Ionov, L. (2011) · Soft Matter · doi:10.1039/c1sm05109a · Cited by 348
“2D or not 2D”: Shape-programming polymer sheets
Liu, Y., Genzer, J., & Dickey, M. D. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.09.001 · Cited by 329
Singh, N. K., & Lee, D. S. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.04.056 · Cited by 326
Automatic Design and Manufacture of Soft Robots
Hiller, J., & Lipson, H. (2012) · IEEE Transactions on Robotics · doi:10.1109/tro.2011.2172702 · Cited by 311
3D printing of shape memory polymer for functional part fabrication
Yang, Y., Chen, Y., Wei, Y., & Li, Y. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7843-2 · Cited by 294
A Bioinspired Soft Actuated Material
Roche, E. T., Wohlfarth, R., Overvelde, J. T. B., Vasilyev, N. V., Pigula, F. A., Mooney, D. J., Bertoldi, K., & Walsh, C. J. (2014) · Advanced Materials · doi:10.1002/adma.201304018 · Cited by 272
Zhang, Q., Zhang, K., & Hu, G. (2016) · Scientific Reports · doi:10.1038/srep22431 · Cited by 269
3D printing antagonistic systems of artificial muscle using projection stereolithography
Peele, B. N., Wallin, T. J., Zhao, H., & Shepherd, R. F. (2015) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/10/5/055003 · Cited by 265
Electroactive Polymers: Developments of and Perspectives for Dielectric Elastomers
Biggs, J., Danielmeier, K., Hitzbleck, J., Krause, J., Kridl, T., Nowak, S., Orselli, E., Quan, X., Schapeler, D., Sutherland, W., et al. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201301918 · Cited by 264
Direct metal laser sintering for rapid tooling: processing and characterisation of EOS parts
Khaing, M. W., Fuh, J. Y. H., & Lü, L. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00584-2 · Cited by 261
3D printing technique applied to rapid casting
Bassoli, E., Gatto, A., Iuliano, L., & Grazia Violante, M. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710750898 · Cited by 253
Kowalczyk, M., Piorkowska, E., Kulpinski, P., & Pracella, M. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.07.003 · Cited by 236
From 3D to 4D printing: Approaches and typical applications
Zhou, Y., Huang, W. M., Kang, S. F., Wu, X. L., Lu, H. B., Fu, J., & Cui, H. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-0925-0 · Cited by 224
Folded dielectric elastomer actuators
Carpi, F., Salaris, C., & Rossi, D. D. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/2/s15 · Cited by 224
Yu, K., Ritchie, A., Mao, Y., Dunn, M. L., & Qi, H. J. (2015) · Procedia IUTAM · doi:10.1016/j.piutam.2014.12.021 · Cited by 220
Printable hydraulics: A method for fabricating robots by 3D co-printing solids and liquids
MacCurdy, R., Katzschmann, R., Kim, Y., & Rus, D. (2016) · 2016 IEEE International Conference on Robotics and Automation (ICRA) · doi:10.1109/icra.2016.7487576 · Cited by 216
Application of 3D Printing for Smart Objects with Embedded Electronic Sensors and Systems
Ota, H., Emaminejad, S., Gao, Y., Zhao, A., Wu, E., Challa, S., Chen, K., Fahad, H. M., Jha, A. K., Kiriya, D., et al. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600013 · Cited by 212
Digital microfabrication of user‐defined 3D microstructures in cell‐laden hydrogels
Soman, P., Chung, P. H., Zhang, A. P., & Chen, S. (2013) · Biotechnology and Bioengineering · doi:10.1002/bit.24957 · Cited by 207
Design and Fabrication of a Soft Robotic Hand With Embedded Actuators and Sensors
She, Y., Li, C., Cleary, J., & Su, H.-J. (2015) · Journal of Mechanisms and Robotics · doi:10.1115/1.4029497 · Cited by 205
Solvent‐Cast Three‐Dimensional Printing of Multifunctional Microsystems
Guo, S., Gosselin, F., Guerin, N., Lanouette, A., Heuzey, M., & Therriault, D. (2013) · Small · doi:10.1002/smll.201300975 · Cited by 203
3D Printed Programmable Release Capsules
Gupta, M. K., Meng, F., Johnson, B. N., Kong, Y. L., Tian, L., Yeh, Y.-W., Masters, N., Singamaneni, S., & McAlpine, M. C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01688 · Cited by 190
Pattern Transformation of Heat-Shrinkable Polymer by Three-Dimensional (3D) Printing Technique
Zhang, Q., Yan, D., Zhang, K., & Hu, G. (2015) · Scientific Reports · doi:10.1038/srep08936 · Cited by 188
Smart hydrogels for 3D bioprinting
Wang, S., Lee, J. M., & Yeong, W. Y. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2015.01.005 · Cited by 181
Self-healing composites: A review
Wang, Y., Pham, D. T., & Ji, C. (2015) · Cogent Engineering · doi:10.1080/23311916.2015.1075686 · Cited by 167
Jana, S., & Lerman, A. (2015) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.07.006 · Cited by 160
A perspective on 4D bioprinting
An, J., Chua, C. K., & Mironov, V. (2015) · International Journal of Bioprinting · doi:10.18063/ijb.2016.01.003 · Cited by 148
Advanced Shape Memory Technology to Reshape Product Design, Manufacturing and Recycling
Yang, W., Lu, H., Huang, W., Qi, H. J., Wu, X., & Sun, K. (2014) · Polymers · doi:10.3390/polym6082287 · Cited by 137
35 Hz shape memory alloy actuator with bending-twisting mode
Song, S.-H., Lee, J.-Y., Rodrigue, H., Choi, I.-S., Kang, Y. J., & Ahn, S. (2016) · Scientific Reports · doi:10.1038/srep21118 · Cited by 134
Fused filament 3D printing of ionic polymer-metal composites (IPMCs)
Carrico, J. D., Traeden, N. W., Aureli, M., & Leang, K. K. (2015) · Smart Materials and Structures · doi:10.1088/0964-1726/24/12/125021 · Cited by 133
Reverse thermogelling biodegradable polymer aqueous solutions
Joo, M. K., Park, M. H., Choi, B. G., & Jeong, B. (2009) · Journal of Materials Chemistry · doi:10.1039/b902208b · Cited by 123
Morrow, J., Shin, H., Phillips-Grafflin, C., Jang, S., Torrey, J., Larkins, R., Dang, S., Park, Y., & Berenson, D. (2016) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2016.7487707 · Cited by 123
Ahn, S., Lee, K., Kim, H.-J., Wu, R., Kim, J., & Song, S.-H. (2012) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-012-0081-8 · Cited by 109
Thermomechanical behavior of shape memory elastomeric composites
Ge, Q., Luo, X., Rodriguez, E. D., Zhang, X., Mather, P. T., Dunn, M. L., & Qi, H. J. (2011) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2011.09.011 · Cited by 104
Level Set Topology Optimization of Printed Active Composites
Maute, K. K., Tkachuk, A., Wu, J., Qi, H. J., Ding, Z., & Dunn, M. L. (2015) · Journal of Mechanical Design · doi:10.1115/1.4030994 · Cited by 102
Self‐Organized Origami Structures via Ion‐Induced Plastic Strain
Chalapat, K., Chekurov, N., Jiang, H., Li, J., Parviz, B. A., & Paraoanu, G. S. (2012) · Advanced Materials · doi:10.1002/adma.201202549 · Cited by 88
Giani, G., Fedi, S., & Barbucci, R. (2012) · Polymers · doi:10.3390/polym4021157 · Cited by 76
Gupta, V., Talebi, M., Deverell, J. A., Sandron, S., Nesterenko, P. N., Heery, B., Thompson, F., Beirne, S., Wallace, G. G., & Paull, B. (2016) · Analytica Chimica Acta · doi:10.1016/j.aca.2016.01.012 · Cited by 74
Laser-assisted bioprinting to deal with tissue complexity in regenerative medicine
Guillemot, F., Guillotin, B., Fontaine, A., Ali, M., Catros, S., Kériquel, V., Fricain, J., Rémy, M., Bareille, R., & Amédée, J. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.272 · Cited by 72
Photo-induced bending in a light-activated polymer laminated composite
Mu, X., Sowan, N., Tumbic, J., Bowman, C. N., Mather, P. T., & Qi, H. J. (2015) · Soft Matter · doi:10.1039/c4sm02592j · Cited by 72
Design of a 3D-printed soft robot with posture and steering control
Umedachi, T., & Trimmer, B. A. (2014) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2014.6907272 · Cited by 70
Elastomeric Tiles for the Fabrication of Inflatable Structures
Morin, S. A., Kwok, S. W., Lessing, J., Ting, J., Shepherd, R. F., Stokes, A. A., & Whitesides, G. M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401339 · Cited by 70
Polylactic acid composites incorporating casein functionalized cellulose nanowhiskers
Gu, J., & Catchmark, J. M. (2013) · Journal of Biological Engineering · doi:10.1186/1754-1611-7-31 · Cited by 66
Freeform fabrication of ionomeric polymer‐metal composite actuators
Malone, E., & Lipson, H. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707004 · Cited by 65
Unclonable security features for additive manufacturing
Ivanova, O., Elliott, A., Campbell, T. A., & Williams, C. B. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.07.001 · Cited by 65
Programmable materials for architectural assembly and automation
Tibbits, S., & Cheung, K. (2012) · Assembly Automation · doi:10.1108/01445151211244348 · Cited by 65
Alam, J., Alam, M., Mohan, R., Abduljaleel, Z., & Dass, L. A. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms151119924 · Cited by 62
Bio-electrospraying embryonic stem cells: interrogating cellular viability and pluripotency
Abeyewickreme, A., Kwok, A., McEwan, J. R., & Jayasinghe, S. N. (2009) · Integrative Biology · doi:10.1039/b819889f · Cited by 61
Printable monolithic hexapod robot driven by soft actuator
Nguyen, C. T., Phung, H., Jung, H., Kim, U., Nguyen, T. D., Park, J., Moon, H., Koo, J. C., & Choi, H. R. (2015) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2015.7139820 · Cited by 47
3D/4D Printing Hydrogel Composites: A Pathway to Functional Devices
Bakarich, S. E., Gorkin, R. A., III, Naficy, S., Gately, R. D., Panhuis, M. I. H., & Spinks, G. M. (2015) · MRS Advances · doi:10.1557/adv.2015.9 · Cited by 40
Three-dimensional photovoltaics
Myers, B., Bernardi, M., & Grossman, J. C. (2010) · Applied Physics Letters · doi:10.1063/1.3308490 · Cited by 39
Jackson, N., & Stam, F. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41687 · Cited by 23
Fabrication of bucky gel actuator/sensor devices based on printing method
Kamamichi, N., Maeba, T., Yamakita, M., & Mukai, T. (2008) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros.2008.4651100 · Cited by 23
A Method for Creating Actuated Joints via Fiber Embedding in a Polyjet 3D Printing Process
Stiltner, L. J., Elliott, A. M., & Williams, C. B. (2011) · doi:10.26153/tsw/15319 · Cited by 18
Feng, G., & Yen, S.-C. (2015) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/transducers.2015.7181316 · Cited by 8
3D Printed Biocompatible Enclosures for an Implantable DBS Microdevice
Adams, S. D., Kouzani, A. Z., Mohammed, M. I., et al. (2015) · Procedia Technology · doi:10.1016/j.protcy.2015.07.026 · Cited by 2
Self-citation
Research works printed but not linked: 19
- Yu, 2015, Oxygen reduction reaction induced pH-responsive chemo-mechanical hydrogel actuators, Soft Matter, 11, 7953, 10.1039/C5SM01892G · doi:10.1039/c5sm01892g
- Mitsumata, 2005, Giant complex modulus reduction of κ‐carrageenan magnetic gels, Macromol. Rapid Commun., 26, 1538, 10.1002/marc.200500405 · doi:10.1002/marc.200500405
- Kerdlapee, 2014, Fabrication of electrostatic MEMS microactuator based on X-ray lithography with Pb-based X-ray mask and dry-film-transfer-to-PCB process, Microsyst. Technol., 20, 127, 10.1007/s00542-013-1816-x · doi:10.1007/s00542-013-1816-x
- Rosochowski, 2000, Rapid tooling: the state of the art, J. Mater. Process. Technol., 106, 191, 10.1016/S0924-0136(00)00613-0 · doi:10.1016/s0924-0136(00)00613-0
- Dippenaar, 2013, 3D printed tooling for vacuum-assisted resin transfer moulding, Int. J. Adv. Manuf. Technol., 64, 755, 10.1007/s00170-012-4034-2 · doi:10.1007/s00170-012-4034-2
- Bartolo, 2003, Stereo-thermal-lithography: a new principle for rapid prototyping, Rapid Prototyping J., 9, 150, 10.1108/13552540310477454 · doi:10.1108/13552540310477454
- P. Walters, D. McGoran, Digital fabrication of smart structures and mechanisms-creative applications in art and design, In: NIP & Digital Fabrication Conference, Society for Imaging Science and Technology. (2011). · doi:10.2352/issn.2169-4451.2011.27.1.art00047_1
- Meisel, 2015, A procedure for creating actuated joints via embedding shape memory alloys in PolyJet 3D printing, J. Intell. Mater. Syst. Struct., 26, 1498, 10.1177/1045389X14544144 · doi:10.1177/1045389x14544144
- Hwang, 2015, Pneumatic microfinger with balloon fins for linear motion using 3D printed molds, Sens. Actuators A, 234, 65, 10.1016/j.sna.2015.08.008 · doi:10.1016/j.sna.2015.08.008
- Slightam, 2012, Novel integrated fluid-power actuators for functional end-use components and systems via selective laser sintering Nylon 12, 23rd Ann. Int. Solid Freeform Fabrication Symp.
- Cai, 2016, 4D printing of soft robotic facial muscles, 2016 Ann. Int. Solid Free Form Fabrication Symp.
- Y. Bar-Cohen, T. McKay, P. Walters, J. Rossiter, B.O’Brien, I. Anderson, 3-dimensional fabrication of soft energy harvesters, 2013, 8687: 86870J. · doi:10.1117/12.2009919
- McDaid, 2012, A compliant surgical robotic instrument with integrated IPMC sensing and actuation, Int. J. Smart Nano Mater., 3, 188, 10.1080/19475411.2011.650231 · doi:10.1080/19475411.2011.650231
- O’Brien, 2008, An experimentally validated model of a dielectric elastomer bending actuator, The 15th International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, International Society for Optics and Photonics
- Cauda, 2015, Nanostructured piezoelectric polymers, J. Appl. Polym. Sci., 132, 10.1002/app.41667 · doi:10.1002/app.41667
- Pabst, 2013, All inkjet-printed electroactive polymer actuators for microfluidic lab-on-chip systems, SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, International Society for Optics and Photonics, 10.1117/12.2009605 · doi:10.1117/12.2009605
- Pabst, 2014, Inkjet printed micropump actuator based on piezoelectric polymers: device performance and morphology studies, Org. Electron., 15, 3306, 10.1016/j.orgel.2014.09.007 · doi:10.1016/j.orgel.2014.09.007
- Lipton, 2016, 3D printing variable stiffness foams using viscous thread instability, Sci. Rep., 6, 29996, 10.1038/srep29996 · doi:10.1038/srep29996
- Ross, 2013, A model to measure surgical outflow using a two-tubed experimental glaucoma drainage device, Invest. Ophthalmol., 54
Cited by
Current and future trends in topology optimization for additive manufacturing
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1994-3 · Cited by 870
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
3D printing of robotic soft actuators with programmable bioinspired architectures
Schaffner, M., Faber, J. A., Pianegonda, L., Rühs, P. A., Coulter, F., & Studart, A. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03216-w · Cited by 518
3D printing for soft robotics – a review
Gul, J. Z., Sajid, M., Rehman, M. M., Siddiqui, G. U., Shah, I., Kim, K.-H., Lee, J.-W., & Choi, K. H. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1431862 · Cited by 428
Metadata
- Authors
- Zolfagharian, A., Kouzani, A. Z., Khoo, S. Y., Moghadam, A. A. A., Gibson, I., & Kaynak, A.
- Venue
- Sensors and Actuators A: Physical
- Publisher
- Elsevier BV
- Published
- 2016-10
- Volume
- 250
- Pages
- 258-272
- ISSN
- 0924-4247 (ISSN-L)
- OpenAlex
- W2528496775
- Cited by
- 314
- References
- 89
- FWCI
- 12.01
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.