The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Enhanced ammonia response of Ti3C2T nanosheets supported by TiO2 nanoparticles at room temperature
Abstract
As a novel 2D material, Ti3C2Tx has been proved to be promising in the field of room temperature ammonia (NH3) sensors by theoretical calculation and experimental testing. However, its NH3 sensing properties still need to be enhanced. In this short communication, the gas sensor based on TiO2/Ti3C2Tx bilayer film is fabricated for enhancing the NH3 sensing properties of pure Ti3C2Tx. The results show that the TiO2/Ti3C2Tx sensor exhibits larger response value (1.63 times) and shorter response/recovery times (0.65/0.52 times) that of pure Ti3C2Tx sensor to 10 ppm NH3 at room temperature of 25 °C (60.8% relative humidity). Meanwhile, the TiO2/Ti3C2Tx sensor is of good linear response (R2 = 0.95596) at 2–10 ppm NH3 and can respond to NH3 as low as 0.5 ppm. This work is expected to provide useful reference for the development of high performance Ti3C2Tx-based NH3 sensors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanotube Molecular Wires as Chemical Sensors
Kong, J., Franklin, N. R., Zhou, C., Chapline, M. G., Peng, S., Cho, K., & Dai, H. (2000) · Science · doi:10.1126/science.287.5453.622 · Cited by 6,043
Nanoscale metal oxide-based heterojunctions for gas sensing: A review
Miller, D. R., Akbar, S. A., & Morris, P. A. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2014.07.074 · Cited by 1,852
Ammonia sensors and their applications—a review
Timmer, B., Olthuis, W., & Berg, A. V. D. (2005) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2004.11.054 · Cited by 1,714
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Nanostructured Materials for Room‐Temperature Gas Sensors
Zhang, J., Liu, X., Neri, G., & Pinna, N. (2016) · Advanced Materials · doi:10.1002/adma.201503825 · Cited by 1,569
Cai, Y., Shen, J., Ge, G., Zhang, Y., Jin, W., Huang, W., Shao, J., Yang, J., & Dong, X. (2018) · ACS Nano · doi:10.1021/acsnano.7b06251 · Cited by 929
Room Temperature Gas Sensing of Two-Dimensional Titanium Carbide (MXene)
Lee, E., VahidMohammadi, A., Prorok, B. C., Yoon, Y. S., Beidaghi, M., & Kim, D.-J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11055 · Cited by 878
Peng, C., Yang, X., Li, Y., Yu, H., Wang, H., & Peng, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11973 · Cited by 847
Electrically-Transduced Chemical Sensors Based on Two-Dimensional Nanomaterials
Meng, Z., Stolz, R. M., Mendecki, L., & Mirica, K. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00311 · Cited by 773
Recent advance in MXenes: A promising 2D material for catalysis, sensor and chemical adsorption
Zhu, J., Ha, E., Zhao, G., Zhou, Y., Huang, D., Yue, G., Hu, L., Sun, N., Wang, Y., Lee, L. Y. S., et al. (2017) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.09.012 · Cited by 659
A Review on Graphene-Based Gas/Vapor Sensors with Unique Properties and Potential Applications
Wang, T., Huang, D., Yang, Z., Xu, S., He, G., Li, X., Hu, N., Yin, G., He, D., & Zhang, L. (2016) · Nano-Micro Letters · doi:10.1007/s40820-015-0073-1 · Cited by 600
Self-citationFang, Y., Liu, Z., Han, J., Jin, Z., Han, Y., Wang, F., Niu, Y., Wu, Y., & Xu, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803406 · Cited by 427
A flexible VOCs sensor based on a 3D Mxene framework with a high sensing performance
Yuan, W., Yang, K., Peng, H., Li, F., & Yin, F. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta06928j · Cited by 400
Zhu, J., Tang, Y., Yang, C., Wang, F., & Cao, M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0981605jes · Cited by 377
Improvement of Gas and Humidity Sensing Properties of Organ-like MXene by Alkaline Treatment
Yang, Z., Liu, A., Wang, C., Liu, F., He, J., Li, S., Wang, J., You, R., Yan, X., Sun, P., et al. (2019) · ACS Sensors · doi:10.1021/acssensors.9b00127 · Cited by 375
Li, Y., Deng, X., Tian, J., Liang, Z., & Cui, H. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.09.004 · Cited by 343
Zhang, D., Jiang, C., Li, P., & Sun, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15669 · Cited by 286
A review on advances in application of polyaniline for ammonia detection
Tanguy, N. R., Thompson, M., & Yan, N. (2018) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2017.11.008 · Cited by 284
Chemically Reduced Graphene Oxide for Ammonia Detection at Room Temperature
Ghosh, R., Midya, A., Santra, S., Ray, S. K., & Guha, P. K. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4019109 · Cited by 213
Tai, H., Yuan, Z., Zheng, W., Ye, Z., Liu, C., & Du, X. (2016) · Nanoscale Research Letters · doi:10.1186/s11671-016-1343-7 · Cited by 168
Self-citationXu, Y., Wang, S., Yang, J., Han, B., Nie, R., Wang, J., Wang, J., & Jing, H. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.086 · Cited by 164
Ye, Z., Tai, H., Xie, T., Yuan, Z., Liu, C., & Jiang, Y. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.09.102 · Cited by 151
Self-citationEffect of layer number on recovery rate of WS 2 nanosheets for ammonia detection at room temperature
Qin, Z., Zeng, D., Zhang, J., Wu, C., Wen, Y., Shan, B., & Xie, C. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.04.063 · Cited by 147
Li, S., Liu, A., Yang, Z., Zhao, L., Wang, J., Liu, F., You, R., He, J., Wang, C., Yan, X., et al. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.03.073 · Cited by 130
Wang, Z., Sackmann, A., Gao, S., Weimar, U., Lu, G., Liu, S., Zhang, T., & Bârsan, N. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.01.109 · Cited by 92
Jiang, X., Tai, H., Ye, Z., Yuan, Z., Liu, C., Su, Y., & Jiang, Y. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.08.010 · Cited by 35
Self-citation
Cited by
Recent advances in energy-saving chemiresistive gas sensors: A review
Majhi, S. M., Mirzaei, A., Kim, H. W., Kim, S. S., & Kim, T. W. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105369 · Cited by 653
Paper-Based Sensors for Gas, Humidity, and Strain Detections: A Review
Tai, H., Duan, Z., Wang, Y., Wang, S., & Jiang, Y. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c06435 · Cited by 441
Self-citationZhang, D., Yu, S., Wang, X., Huang, J., Pan, W., Zhang, J., Meteku, B. E., & Zeng, J. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127160 · Cited by 424
Evolution of breath analysis based on humidity and gas sensors: Potential and challenges
Tai, H., Wang, S., Duan, Z., & Jiang, Y. (2020) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2020.128104 · Cited by 412
Self-citationYang, Z., Jiang, L., Wang, J., Liu, F., He, J., Liu, A., Lv, S., You, R., Yan, X., Sun, P., et al. (2021) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2020.128828 · Cited by 357
Metadata
- Authors
- Tai, H., Duan, Z., He, Z., Li, X., Xu, J., Liu, B., & Jiang, Y.
- Venue
- Sensors and Actuators B: Chemical
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 298
- Pages
- 126874
- ISSN
- 0925-4005 (ISSN-L)
- OpenAlex
- W2963737154
- Cited by
- 325
- References
- 26
- FWCI
- 14.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.