The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Risk evaluation using a novel hybrid method based on FMEA, extended MULTIMOORA, and AHP methods under fuzzy environment
Abstract
Abstract Failure mode and effects analysis (FMEA) is one of the most important risk assessment tools which has been extensively used in different industries and organizations. In the conventional FMEA, sometimes the difference between some failure modes cannot be distinguished. In order to evaluate various failure modes more precisely, a novel fuzzy hybrid model for FMEA is proposed in this paper. In this method, fuzzy weighted risk priority number (FWRPN) is considered instead of RPN for each failure. The weights of the three factors and the weights of failure modes are computed by extended fuzzy AHP and fuzzy MULTIMOORA methods, respectively. The proposed fuzzy MULTIMOORA method calculates the weight of each failure based on three criteria of time, cost, and profit through fuzzy linguistic terms. After calculating FWRPN for each failure, corrective actions are performed for eliminating the identified failures or decreasing the effects of them. Then, corrected fuzzy weighted risk priority number (CFWRPN) is computed for each failure. Finally, the average of FWRPNs (AFWRPNs) with the average of CFWRPNs (ACFWRPNs) are compared to evaluate the effectiveness of corrective actions by a novel ranking fuzzy numbers method. In addition, the proposed ranking fuzzy number method is also used in both previously mentioned fuzzy multi-criteria decision making (MCDM) methods. Eventually, Kerman Steel Industries Factory is considered as a case study to demonstrate the applicability and benefits of the proposed fuzzy hybrid method. A sensitivity analysis is performed to validate the obtained results. Findings show that AFWRPNs decreased by 56% compared to ACFWRPNs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zadeh, L. A. (1965) · Information and Control · doi:10.1016/s0019-9958(65)90241-x · Cited by 67,855
Zadeh, L. A. (1996) · Cited by 46,852
The Analytic Hierarchy Process
SAATY, T. L., & KEARNS, K. P. (1985) · Analytical Planning · doi:10.1016/b978-0-08-032599-6.50008-8 · Cited by 15,357
Case study research: Design and methods
McCorcle, M. D., & Bell, E. L. (1986) · Evaluation and Program Planning · doi:10.1016/0149-7189(86)90052-2 · Cited by 5,885
A fuzzy extension of Saaty's priority theory
van Laarhoven, P. J. M., & Pedrycz, W. (1983) · Fuzzy Sets and Systems · doi:10.1016/s0165-0114(83)80082-7 · Cited by 3,045
Failure Mode and Effect Analysis: FMEA From Theory to Execution
Schneider, H. (1996) · Technometrics · doi:10.1080/00401706.1996.10484424 · Cited by 1,493
The MOORA method and its application to privatization in a transition economy
Brauers, W. K., & Zavadskas, E. K. (2006) · Control and Cybernetics · Cited by 968
Risk evaluation approaches in failure mode and effects analysis: A literature review
Liu, H.-C., Liu, L., & Liu, N. (2013) · Expert Systems with Applications · doi:10.1016/j.eswa.2012.08.010 · Cited by 965
Fuzzy logic prioritization of failures in a system failure mode, effects and criticality analysis
Bowles, J. B., & Peláez, C. E. (1995) · Reliability Engineering & System Safety · doi:10.1016/0951-8320(95)00068-d · Cited by 687 · cited 2×
“…studies in the fuzzy FMEA literature have mostly considered fuzzy ifthen rule based approach, where conditional parts and/or conclusions include linguistic variables (Bowles and Peláez, 1995; Jong et al., 2013; Kahraman et al., 2013; Pillay and Wang, 2003; Sharma et al., 2005; Vinodh et al., 2012).”
BackgroundBrauers, W. K. M., & Zavadskas, E. K. (2010) · Technological and Economic Development of Economy · doi:10.3846/tede.2010.01 · Cited by 649
Risk evaluation in failure mode and effects analysis using fuzzy weighted geometric mean
Wang, Y.-M., Chin, K.-S., Poon, G. K. K., & Yang, J.-B. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.11.028 · Cited by 630
Fuzzy failure modes and effects analysis by using fuzzy TOPSIS-based fuzzy AHP
Kutlu, A. C., & Ekmekçioğlu, M. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.06.044 · Cited by 594
Modified failure mode and effects analysis using approximate reasoning
Pillay, A., & Wang, J. (2003) · Reliability Engineering & System Safety · doi:10.1016/s0951-8320(02)00179-5 · Cited by 581
Seyed-Hosseini, S. M., Safaei, N., & Asgharpour, M. J. (2006) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2005.09.005 · Cited by 410
Liu, H.-C., Liu, L., Liu, N., & Mao, L.-X. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2012.05.031 · Cited by 388
Liu, H.-C., You, J.-X., You, X.-Y., & Shan, M.-M. (2015) · Applied Soft Computing · doi:10.1016/j.asoc.2014.11.036 · Cited by 377
Gou, X., Liao, H., Xu, Z., & Herrera, F. (2017) · Information Fusion · doi:10.1016/j.inffus.2017.02.008 · Cited by 356
Failure mode and effects analysis using a group-based evidential reasoning approach
Chin, K.-S., Wang, Y.-M., Ka Kwai Poon, G., & Yang, J.-B. (2009) · Computers & Operations Research · doi:10.1016/j.cor.2008.05.002 · Cited by 336
Systematic failure mode effect analysis (FMEA) using fuzzy linguistic modelling
Sharma, R. K., Kumar, D., & Kumar, P. (2005) · International Journal of Quality & Reliability Management · doi:10.1108/02656710510625248 · Cited by 324
Robustness of MULTIMOORA: A Method for Multi-Objective Optimization
Brauers, W. K., & Zavadskas, E. K. (2012) · Informatica · doi:10.15388/informatica.2012.346 · Cited by 305
Failure mode and effects analysis using fuzzy evidential reasoning approach and grey theory
Liu, H.-C., Liu, L., Bian, Q.-H., Lin, Q.-L., Dong, N., & Xu, P.-C. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.09.110 · Cited by 269
Song, W., Ming, X., Wu, Z., & Zhu, B. (2014) · Quality and Reliability Engineering International · doi:10.1002/qre.1500 · Cited by 227
Criticality Assessment Models for Failure Mode Effects and Criticality Analysis Using Fuzzy Logic
Gargama, H., & Chaturvedi, S. K. (2011) · IEEE Transactions on Reliability · doi:10.1109/tr.2010.2103672 · Cited by 226
Failure mode and effects analysis by data envelopment analysis
Chin, K.-S., Wang, Y.-M., Poon, G. K. K., & Yang, J.-B. (2009) · Decision Support Systems · doi:10.1016/j.dss.2009.08.005 · Cited by 219
Mohsen, O., & Fereshteh, N. (2017) · Safety Science · doi:10.1016/j.ssci.2016.10.006 · Cited by 210
Baležentis, T., & Zeng, S. (2013) · Expert Systems with Applications · doi:10.1016/j.eswa.2012.07.066 · Cited by 204
An integrated fuzzy MCDM approach for supplier evaluation and selection
Karsak, E. E., & Dursun, M. (2015) · Computers & Industrial Engineering · doi:10.1016/j.cie.2015.01.019 · Cited by 200
Liu, H.-C., You, J.-X., Lu, C., & Chen, Y.-Z. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.08.061 · Cited by 199
A revised failure mode and effects analysis model
Ben‐Daya, M., & Raouf, A. (1996) · International Journal of Quality & Reliability Management · doi:10.1108/02656719610108297 · Cited by 192
Risk evaluation of green components to hazardous substance using FMEA and FAHP
Hu, A. H., Hsu, C.-W., Kuo, T.-C., & Wu, W.-C. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2008.08.031 · Cited by 189
Zhao, H., You, J.-X., & Liu, H.-C. (2017) · Soft Computing · doi:10.1007/s00500-016-2118-x · Cited by 186
Evaluating the risk of failure modes with extended MULTIMOORA method under fuzzy environment
Liu, H.-C., Fan, X.-J., Li, P., & Chen, Y.-Z. (2014) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2014.04.011 · Cited by 185
Gul, M., & Guneri, A. F. (2016) · Journal of Loss Prevention in the Process Industries · doi:10.1016/j.jlp.2015.11.023 · Cited by 175
Gül, M., Ak, M. F., & Güneri, A. F. (2016) · Human and Ecological Risk Assessment An International Journal · doi:10.1080/10807039.2016.1234363 · Cited by 143
A multidimensional approach to information security risk management using FMEA and fuzzy theory
Silva, M. M., de Gusmão, A. P. H., Poleto, T., Silva, L. C. E., & Costa, A. P. C. S. (2014) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2014.07.005 · Cited by 138
Çiçek, K., & Çelik, M. (2012) · Safety Science · doi:10.1016/j.ssci.2012.06.003 · Cited by 134
Liu, H., You, J., Lu, C., & Shan, M. (2014) · Waste Management · doi:10.1016/j.wasman.2014.07.016 · Cited by 128
Brauers, W. K., Baležentis, А., & Baležentis, T. (2011) · Technological and Economic Development of Economy · doi:10.3846/20294913.2011.580566 · Cited by 124
Use of fuzzy risk assessment in FMEA of offshore engineering systems
Yang, Z., & Wang, J. (2015) · Ocean Engineering · doi:10.1016/j.oceaneng.2014.11.037 · Cited by 121
A model for failure mode and effects analysis based on intuitionistic fuzzy approach
Tooranloo, . S., & Ayatollah, A. S. (2016) · Applied Soft Computing · doi:10.1016/j.asoc.2016.07.047 · Cited by 109
An assessment of RPN prioritization in a failure modes effects and criticality analysis
Bowles, J. B. (2003) · Annual Reliability and Maintainability Symposium (RAMS) · doi:10.1109/rams.2003.1182019 · Cited by 106
Hafezalkotob, A., & Hafezalkotob, A. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.087 · Cited by 101
Extension of MULTIMOORA method with interval numbers: An application in materials selection
Hafezalkotob, A., Hafezalkotob, A., & Sayadi, M. K. (2015) · Applied Mathematical Modelling · doi:10.1016/j.apm.2015.07.019 · Cited by 100
Ozdemir, Y., Gül, M., & Çelik, E. (2017) · Human and Ecological Risk Assessment An International Journal · doi:10.1080/10807039.2017.1292844 · Cited by 95
A Survey on Development and Applications of the Multi-criteria Decision Making Method MULTIMOORA
Baležentis, T., & Baležentis, А. (2013) · Journal of Multi-Criteria Decision Analysis · doi:10.1002/mcda.1501 · Cited by 92
Application of the fuzzy Failure Mode and Effect Analysis methodology to edible bird nest processing
Jong, C. H., Tay, K. M., & Lim, C. P. (2013) · Computers and Electronics in Agriculture · doi:10.1016/j.compag.2013.04.015 · Cited by 78
A hybrid risk-based approach for maritime applications: The case of ballast tank maintenance
Gül, M., Çelik, E., & Akyüz, E. (2017) · Human and Ecological Risk Assessment An International Journal · doi:10.1080/10807039.2017.1317204 · Cited by 73
Healthcare Failure Mode and Effects Analysis Under Fuzziness
Kahraman, C., Kaya, İ., & Şenvar, Ö. (2012) · Human and Ecological Risk Assessment An International Journal · doi:10.1080/10807039.2012.737753 · Cited by 55
Souzangarzadeh, H., Rezvani, M. J., & Jahan, A. (2017) · Applied Mathematical Modelling · doi:10.1016/j.apm.2017.07.005 · Cited by 40
Fuzzy assessment of FMEA for rotary switches: a case study
Vinodh, S., Aravindraj, S., Narayanan, R. S., & Yogeshwaran, N. (2012) · The TQM Journal · doi:10.1108/17542731211261601 · Cited by 36
A Novel Approach for Evaluating the Risk of Health Care Failure Modes
Chang, D. S., Chung, J.-H., Sun, K.-L., & Yang, F. (2012) · Journal of Medical Systems · doi:10.1007/s10916-012-9868-5 · Cited by 31
Country risk assessment based on MULTIMOORA
Stankevičė, J., & Sviderskė, T. (2012) · Business and management · doi:10.3846/bm.2012.069 · Cited by 8
Cited by
Liu, H.-C., Chen, X.-Q., Duan, C.-Y., & Wang, Y.-M. (2019) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.06.055 · Cited by 262
An integrated approach for fuzzy failure modes and effects analysis using fuzzy AHP and fuzzy MAIRCA
Boral, S., Howard, I., Chaturvedi, S. K., McKee, K., & Naikan, V. N. A. (2020) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.104195 · Cited by 215
“Fattahi & Khalilzad eh / 2018 [29] -Fuzzy AHP, -Fuzzy MULTIMOORA -Weights of each failure modes were calculated by using three factors – time, cost and profit.”
MethodLi, Y., Liu, P., & Li, G. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2023.109196 · Cited by 50
Yan, W., Wang, X., Liu, Y., Zhang, X.-M., Jiang, Z.-G., & Huang, L. (2024) · Scientific Reports · doi:10.1038/s41598-024-51169-6 · Cited by 31
Metadata
- Authors
- Fattahi, R., & Khalilzadeh, M.
- Venue
- Safety Science
- Publisher
- Elsevier BV
- Published
- 2018-02
- Volume
- 102
- Pages
- 290-300
- ISSN
- 0925-7535 (ISSN-L)
- OpenAlex
- W2768032368
- Cited by
- 367
- References
- 52
- FWCI
- 31.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.