Pyrolysis of domestic based feedstock at temperatures up to 300 °C
Open accessThe DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
This article reports the state of the art of the characteristics of products derived from the pyrolysis of municipal solid waste. The by-products which arise at more elevated temperatures are discussed so that the outcomes of low temperature pyrolysis may be put into context. Our throwaway society is a globally growing issue, the continued discarding of valuable resources into landfill sites is highly undesirable due to many of these materials being non-biodegradable and some may produce toxic gases which are harmful to the environment if discarded in an uncontrolled way. Domestic and industrial sorting and transport of discarded resources result in an increase in carbon footprint as well as a high cost. Therefore, an alternative resource management method is required in order to achieve a more sustainable and less harmful method of managing these valuable resources in the future. Below 300 °C, the products of pyrolysis are generally expected largely to contain biochar, bio-oil and syngas. However, the phase distribution and chemical composition of the products is highly dependent on the feedstock used as well as the operating parameters of the process. Plant based feedstock produces more biochar while plastic based feedstock produces more bio-oil. The composition of products can be analysed using gas chromatography/mass spectrometry. Current applications of pyrolysis are focused on high temperatures due to the increased yields of gases and bio-oils, which are more valuable. Biochar, however, is becoming increasingly popular due to its various applications such as a filter material for water purification. Low temperature pyrolysis is an area where further research is required in order to produce economically viable processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Persistence of soil organic matter as an ecosystem property
Schmidt, M. W. I., Torn, M. S., Abiven, S., Dittmar, T., Guggenberger, G., Janssens, I. A., Kleber, M., Kögel-Knabner, I., Lehmann, J., Manning, D. A. C., et al. (2011) · Nature · doi:10.1038/nature10386 · Cited by 6,057
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Biochar as a sorbent for contaminant management in soil and water: A review
Ahmad, M., Rajapaksha, A. U., Lim, J. E., Zhang, M., Bolan, N., Mohan, D., Vithanage, M., Lee, S. S., & Ok, Y. S. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2013.10.071 · Cited by 4,662
Mohan, D., Sarswat, A., Ok, Y. S., & Pittman, C. U. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.01.120 · Cited by 2,313
The biorefinery concept: Using biomass instead of oil for producing energy and chemicals
Cherubini, F. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.01.015 · Cited by 2,229
Application of biochar for the removal of pollutants from aqueous solutions
Tan, X., Liu, Y., Zeng, G., Wang, X., Hu, X., Gu, Y., & Yang, Z. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2014.12.058 · Cited by 2,081
Kambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746
Biofuels Production through Biomass Pyrolysis—A Technological Review
Jahirul, M., Rasul, M., Chowdhury, A., & Ashwath, N. (2012) · Energies · doi:10.3390/en5124952 · Cited by 1,427
Ahmad, M., Lee, S. S., Dou, X., Mohan, D., Sung, J.-K., Yang, J. E., & Ok, Y. S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.042 · Cited by 1,357
Cited by
Alkharabsheh, H. M., Seleiman, M. F., Battaglia, M. L., Shami, A., Jalal, R. S., Alhammad, B. A., Almutairi, K. F., & Al-Saif, A. M. (2021) · Agronomy · doi:10.3390/agronomy11050993 · Cited by 538
Plastic waste as pyrolysis feedstock for plastic oil production: A review
Chang, S. H. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.162719 · Cited by 302
Microwaves and Heterogeneous Catalysis: A Review on Selected Catalytic Processes
Palma, V., Barba, D., Cortese, M., Martino, M., Renda, S., & Meloni, E. (2020) · Catalysts · doi:10.3390/catal10020246 · Cited by 280
Biochar for a sustainable future: Environmentally friendly production and diverse applications
Afshar, M., & Mofatteh, S. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.102433 · Cited by 233
Pyrolysis of waste feedstocks in CO2 for effective energy recovery and waste treatment
Kwon, E. E., Kim, S., & Lee, J. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.03.015 · Cited by 167
Metadata
- Authors
- Jouhara, H., Ahmad, D., van den Boogaert, I., Katsou, E., Simons, S., & Spencer, N.
- Venue
- Thermal Science and Engineering Progress
- Publisher
- Elsevier BV
- Published
- 2018-03
- Volume
- 5
- Pages
- 117-143
- ISSN
- 2451-9049 (ISSN-L)
- OpenAlex
- W2770303739
- Cited by
- 122
- References
- 21
- FWCI
- 2.91
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Pyrolysis of domestic based feedstock at temperatures up to 300 °C. https://app.cochat.ai/papers/10.1016/j.tsep.2017.11.007
- The paper
- Jouhara, H., Ahmad, D., van den Boogaert, I., Katsou, E., Simons, S., & Spencer, N. (2018). Pyrolysis of domestic based feedstock at temperatures up to 300 °C. Thermal Science and Engineering Progress. https://doi.org/10.1016/j.tsep.2017.11.007
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.