The DOI matches its Crossref record; 273 of the 273 references it cites were found in a registry or an index.
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Abstract
Abstract Additive Manufacturing (AM) is the significantly progressing field in terms of methods, materials, and performance of fabricated parts. Periodical evaluation on the understanding of AM processes and its evolution is needed since the field is growing rapidly. To address this requirement, this paper presents a detailed review of the Additive Manufacturing (AM) methods, materials used, and challenges associated with them. A critical review of the state of art materials in the categories such as metals and alloys, polymers, ceramics, and biomaterials are presented along with their applications, benefits, and the problems associated with the formation of microstructures, mechanical properties, and controlling process parameters. The perspectives and the status of different materials on the fabrication of thin-walled structures using AM techniques have also been discussed. Additionally, the main challenges with AM techniques such as inaccuracy, surface quality, reinforcement distribution, and other common problems identified from the literature are presented. On the whole, this paper provides a comprehensive outlook on AM techniques, challenges, and future research directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–273 of 273
Static and Dynamic Mechanical Properties of 3D Printed ABS as a Function of Raster Angle
Galeja, M., Hejna, A., Kosmela, P., & Kulawik, A. (2020) · Materials · doi:10.3390/ma13020297 · Cited by 127
Challenges and Opportunities in Design for Additive Manufacturing
Seepersad, C. C. (2014) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2013.0006 · Cited by 126
Options for additive rapid prototyping methods (3D printing) in MEMS technology
Lifton, V. A., Lifton, G., & Simon, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2013-0038 · Cited by 120
Effect of particle size gradation on the performance of glass-ceramic 3D printing process
Sun, C., Tian, X., Wang, L., Liu, Y., Wirth, C. M., Günster, J., Li, D., & Jin, Z. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.09.197 · Cited by 120
Studies of magnetic properties of permalloy (Fe–30%Ni) prepared by SLM technology
Zhang, B., Fenineche, N., Zhu, L., Liao, H., & Coddet, C. (2011) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2011.08.030 · Cited by 116
Construction by contour crafting using sulfur concrete with planetary applications
Khoshnevis, B., Yuan, X., Zahiri, B., Zhang, J., & Xia, B. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0165 · Cited by 115
Mostafaei, A., Vecchis, P. R. D., Stevens, E. L., & Chmielus, M. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.05.047 · Cited by 115
Additive manufacturing of magnetic materials
Périgo, E. A., Jaćimović, J., Ferré, F. G., & Scherf, L. M. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100870 · Cited by 112
Li, L., Fuh, J. Y. H., & Wong, Y. S. (2001) · Springer eBooks · doi:10.1007/978-1-4615-1469-5_5 · Cited by 110
Laser Additive Manufacturing of Magnetic Materials
Mikler, C. V., Chaudhary, V., Borkar, T., Soni, V., Jaeger, D. L., Chen, X., Contieri, R. J., Ramanujan, R. V., & Banerjee, R. (2017) · JOM · doi:10.1007/s11837-017-2257-2 · Cited by 109
On the characterization of stainless steel 316L parts produced by selective laser melting
Yakout, M., Elbestawi, M. A., & Veldhuis, S. C. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1303-0 · Cited by 108
Recent advancements in additive manufacturing technologies for porous material applications
Guddati, S., Kiran, A. S. K., Leavy, M., & Ramakrishna, S. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04116-z · Cited by 108
Senthil, S. M., Parameshwaran, R., Nathan, S. R., Kumar, M. B., & Deepandurai, K. (2020) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-020-02542-2 · Cited by 108
NiTi–Al interface strength in ultrasonic additive manufacturing composites
Hahnlen, R., & Dapino, M. J. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.10.024 · Cited by 103
Laser melting functionally graded composition of Waspaloy® and Zirconia powders
Mumtaz, K., & Hopkinson, N. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-1661-3 · Cited by 103
3D bioprinting: A new insight into the therapeutic strategy of neural tissue regeneration
Hsieh, F.-Y., & Hsu, S. (2015) · Organogenesis · doi:10.1080/15476278.2015.1123360 · Cited by 102
Nature of the interfaces between the constituent phases in the high entropy alloy CoCrCuFeNiAl
Welk, B. A., Williams, R. E. A., Viswanathan, G. B., Gibson, M. A., Liaw, P. K., & Fraser, H. L. (2013) · Ultramicroscopy · doi:10.1016/j.ultramic.2013.06.006 · Cited by 99
Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy
Zhang, S., Li, J. F., Sun, J., & Jiang, F. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2077-9 · Cited by 99
Nonato, R. C., Mei, L. H. I., Bonse, B. C., Chinaglia, E. F., & Morales, A. R. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.02.026 · Cited by 97
Algardh, J. K., Horn, T., West, H., Aman, R., Snis, A., Engqvist, H., Lausmaa, J., & Harrysson, O. L. A. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.009 · Cited by 96
Binder-Jet Printing of Fine Stainless Steel Powder with Varied Final Density
Ziaee, M., Tridas, E., & Crane, N. B. (2016) · JOM · doi:10.1007/s11837-016-2177-6 · Cited by 96
(2019) · CRC Press eBooks · doi:10.1201/9780429466236 · Cited by 96
Microstructural control during direct laser deposition of a β-titanium alloy
Qiu, C., Ravi, G. A., & Attallah, M. M. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2015.05.031 · Cited by 92
Biomimicry at the nanoscale: current research and perspectives of two-photon polymerization
Marino, A., Filippeschi, C., Mattoli, V., Mazzolai, B., & Ciofani, G. (2014) · Nanoscale · doi:10.1039/c4nr06500j · Cited by 90
Purtov, J., Verch, A., Rogin, P., et al. (2018) · Microelectronic Engineering · doi:10.1016/j.mee.2018.03.009 · Cited by 89
Li, J., Monaghan, T., Nguyen, T. T., Kay, R. W., Friel, R. J., & Harris, R. A. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.01.013 · Cited by 88
3D printed antibacterial silver nanowire/polylactide nanocomposites
Bayraktar, I., Doğanay, D., Coşkun, Ş., Kaynak, C., Akca, G., & Ünalan, H. E. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.05.059 · Cited by 88
The relationship between the cutting speed, tool wear, and chip formation during Ti-5553 dry cutting
Wagner, V., Baili, M., & Dessein, G. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6326-1 · Cited by 87
Dwivedi, C., Pandey, I., Pandey, H., Patil, S., Mishra, S. B., Pandey, A. C., Zamboni, P., Ramteke, P. W., & Singh, A. V. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36268 · Cited by 86
Hehr, A., & Dapino, M. J. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.03.005 · Cited by 84
Weng, W., Biesiekierski, A., Li, Y., & Wen, C. (2019) · Materialia · doi:10.1016/j.mtla.2019.100323 · Cited by 84
Three-Dimensional Printing of Plastics
Kazmer, D. O. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-39040-8.00029-8 · Cited by 83
Fuzzy integrated QFD, FMEA framework for the selection of lean tools in a manufacturing organisation
Kumar, M. B., & Parameshwaran, R. (2018) · Production Planning & Control · doi:10.1080/09537287.2018.1434253 · Cited by 81
Xie, X., Ma, Y., Chen, C., Ji, G., Verdy, C., Wu, H., Chen, Z., Yuan, S., Normand, B., Yin, S., et al. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.152962 · Cited by 81
Bandyopadhyay, A. K., Shivaram, A., Isik, M., Avila, J. D., Dernell, W. S., & Bose, S. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.04.020 · Cited by 78
Rapid manufacturing — the technologies and applications of rapid prototyping and rapid tooling
Edwards, K. L. (2002) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(01)00077-2 · Cited by 77
Improvement of cyclic durability of Ti–Cr–V alloy by Fe substitution
Aoki, M., Noritake, T., Ito, A., Ishikiriyama, M., & Towata, S. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2011.07.019 · Cited by 76
Zhan, Z., Li, H., & Lam, K. Y. (2019) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2019.02.032 · Cited by 75
Meng, S., He, H., Jia, Y., Yu, P., Huang, B., & Chen, J. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44470 · Cited by 73
Method for embedding optical fibers in an aluminum matrix by ultrasonic consolidation
Kong, C. Y., & Soar, R. C. (2005) · Applied Optics · doi:10.1364/ao.44.006325 · Cited by 71
Ajoku, U., Hopkinson, N., & Caine, M. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.05.019 · Cited by 67
Singh, A. V., Ansari, M. H. D., Wang, S., Laux, P., Luch, A., Kumar, A., Patil, R., & Nußberger, S. (2019) · Applied Sciences · doi:10.3390/app9040811 · Cited by 66
Residual stress analysis of thin AlSi10Mg parts produced by Laser Powder Bed Fusion
Salmi, A., & Atzeni, E. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1650237 · Cited by 64
Campbell, T. A., Tibbits, S., & Garrett, B. N. (2014) · Scientific American · doi:10.1038/scientificamerican1114-60 · Cited by 63
Shuai, C., Zhou, Y., Yang, Y., Feng, P., Liu, L., He, C., Zhao, M., Yang, S. L., Gao, C., & Wu, P. (2017) · Materials · doi:10.3390/ma10030307 · Cited by 61
Binder jetting additive manufacturing of copper foam structures
Miyanaji, H., Ma, D., Atwater, M. A., Darling, K. A., Hammond, V. H., & Williams, C. B. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100960 · Cited by 60
Selective laser melting of boron carbide particles coated by a cobalt-based metal layer
Davydova, A. A., Domashenkov, A., Sova, A., Movtchan, I. A., Bertrand, P., Desplanques, B., Peillon, N., Saunier, S., Desrayaud, C., Bucher, S., et al. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.09.033 · Cited by 58
Toman, J., Müllner, P., & Chmielus, M. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.04.059 · Cited by 56
Yang, X., Liu, J., Cui, X., Jin, G. D., Liu, Z., Chen, Y., & Feng, X. (2019) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2019.03.001 · Cited by 56
Microscale Electro‐Hydrodynamic Cell Printing with High Viability
He, J., Zhao, X., Chang, J., & Li, D. (2017) · Small · doi:10.1002/smll.201702626 · Cited by 52
Mou, C., Saffari, P., Li, D., Zhou, K., Zhang, L., Soar, R. C., & Ian Bennion, C. (2009) · Measurement Science and Technology · doi:10.1088/0957-0233/20/3/034013 · Cited by 50
Zheng, Y., Zhang, Y., Zhang, J., Sun, C., Chu, C., Tian, K., Zhang, Z., & Bi, W. (2019) · Nanoscale Research Letters · doi:10.1186/s11671-019-2984-0 · Cited by 48
Fedorovich, N. E., de Wijn, J. R., Verbout, A. J., et al. (2008) · Tissue Engineering · doi:10.1089/ten.2007.0158 · Cited by 48
Grigoriev, S. N., Tarasova, T. V., Gusarov, A. V., Khmyrov, R. S., & Egorov, S. (2019) · Materials · doi:10.3390/ma12203425 · Cited by 47
Printing (Mn,Fe)2(P,Si) magnetocaloric alloys for magnetic refrigeration applications
Miao, X., Wang, W., Liang, H., Qian, F., Cong, M., Zhang, Y., Muhammad, A., Tian, Z., & Xu, F. Y. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04488-8 · Cited by 47
Li, X., Gao, M., & Jiang, Y. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.05.027 · Cited by 44
Structurally Embedded Electrical Systems Using Ultrasonic Consolidation (UC)
Siggard, E. J., Madhusoodanan, A. S., Stucker, B. E., & Eames, B. (2006) · doi:10.26153/tsw/7118 · Cited by 43
Effect of the process parameters in the additive manufacturing of in situ Al/AlN samples
Riquelme, A., Rodrigo, P., Escalera-Rodríguez, M. D., & Rams, J. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.09.011 · Cited by 42
Wu, S., Ahmad, Z., Li, J., & Chang, M. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110393 · Cited by 42
Huang, Z., Tang, Y., Guo, H., Feng, X., Zhang, T., Li, P., Qian, B., & Xie, Y. (2020) · Ceramics International · doi:10.1016/j.ceramint.2019.12.278 · Cited by 42
Inconel 625/TiB2 Metal Matrix Composites by Direct Laser Deposition
Promakhov, V., Zhukov, A. S., Ziatdinov, M., Zhukov, I., Schulz, N. A., Kovalchuk, S., Дубкова, Я. А., Korsmik, R. S., Klimova-Korsmik, O., Андреевич, Т. Г., et al. (2019) · Metals · doi:10.3390/met9020141 · Cited by 41
Zhang, B., He, J., Lei, Q., & Li, D. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1662991 · Cited by 41
Petrovskiy, P. V., Travyanov, A. Y., Викторович, Ч. В., Chereshneva, A. A., Sova, A., & Smurov, I. Y. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05080-9 · Cited by 38
Liquid Resins-Based Additive Manufacturing
Wang, F., & Wang, F. (2017) · Journal of Molecular and Engineering Materials · doi:10.1142/s2251237317400044 · Cited by 36
Nanoscale 3D Bioprinting for Osseous Tissue Manufacturing
Wang, Y., Gao, M. X., Wang, D., Sun, L., & Webster, T. J. (2020) · International Journal of Nanomedicine · doi:10.2147/ijn.s172916 · Cited by 36
Zhang, C., Wang, W., Wei, X., & Liu, L. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.10.017 · Cited by 34
Effects of printing conditions on the molecular alignment of three-dimensionally printed polymer
Gundrati, N. B., Chakraborty, P., Zhou, C., & Chung, D. D. L. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.09.067 · Cited by 32
Laser additive processing of Fe-Si-B-Cu-Nb magnetic alloys
Conteri, R., Borkar, T., Nag, S., Jaeger, D. L., Chen, X., Ramanujan, R. V., & Banerjee, R. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2017.07.029 · Cited by 29
Increasing Damping of Thin-Walled Structures Using Additively Manufactured Vibration Eliminators
Dunaj, P., Berczyński, S., Miądlicki, K., et al. (2020) · Materials · doi:10.3390/ma13092125 · Cited by 28
Chunping, H., Xin, L., Fencheng, L., Cao, J., Fenggang, L., & Weidong, H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7453-z · Cited by 27
Joseph, J., Deshmukh, K., Tùng, T. T., Chidambaram, K., & Pasha, S. K. K. (2019) · Lecture notes in bioengineering · doi:10.1007/978-3-030-04741-2_7 · Cited by 23
Net Shape 3D Printed NdFeB Permanent MagnetPreprint
Jaćimović, J., Binda, F., Herrmann, L. G., et al. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1611.05332 · Cited by 3
Aygül, E., Yalçınkaya, S., & Şahin, Y. (2019) · Preprints.org · doi:10.20944/preprints201910.0285.v1 · Cited by 2
Cited by
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 450
Rheological characterisation of ceramic inks for 3D direct ink writing: A review
del-Mazo-Barbara, L., & Ginebra, M.-P. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.08.031 · Cited by 444
Alami, A. H., Ghani Olabi, A., Alashkar, A., Alasad, S., Aljaghoub, H., Rezk, H., & Abdelkareem, M. A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2023.102516 · Cited by 349
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Metadata
- Authors
- Bhuvanesh Kumar, M., & Sathiya, P.
- Venue
- Thin-Walled Structures
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 159
- Pages
- 107228
- ISSN
- 0263-8231 (ISSN-L)
- OpenAlex
- W3095578584
- Cited by
- 372
- References
- 273
- FWCI
- 14.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.