The DOI matches its Crossref record; 273 of the 273 references it cites were found in a registry or an index.
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Abstract
Abstract Additive Manufacturing (AM) is the significantly progressing field in terms of methods, materials, and performance of fabricated parts. Periodical evaluation on the understanding of AM processes and its evolution is needed since the field is growing rapidly. To address this requirement, this paper presents a detailed review of the Additive Manufacturing (AM) methods, materials used, and challenges associated with them. A critical review of the state of art materials in the categories such as metals and alloys, polymers, ceramics, and biomaterials are presented along with their applications, benefits, and the problems associated with the formation of microstructures, mechanical properties, and controlling process parameters. The perspectives and the status of different materials on the fabrication of thin-walled structures using AM techniques have also been discussed. Additionally, the main challenges with AM techniques such as inaccuracy, surface quality, reinforcement distribution, and other common problems identified from the literature are presented. On the whole, this paper provides a comprehensive outlook on AM techniques, challenges, and future research directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Deformation and Fracture Mechanics of Engineering Materials
Hertzberg, R. W., & Hauser, F. E. (1977) · Journal of Engineering Materials and Technology · doi:10.1115/1.3443416 · Cited by 3,668
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Wang, W. H., Dong, C., & Shek, C. H. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.03.001 · Cited by 2,803
3-D printing: The new industrial revolution
Berman, B. (2012) · Business Horizons · doi:10.1016/j.bushor.2011.11.003 · Cited by 2,481
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Proceedings of the 2017 CHI Conference on Human Factors in Computing Systems
(2017) · doi:10.1145/3025453 · Cited by 2,207
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Wire + Arc Additive Manufacturing
Williams, S., Martina, F., Addison, A. C., Ding, J., Pardal, G., & Colegrove, P. A. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000073 · Cited by 1,971
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Scaffold-free vascular tissue engineering using bioprinting
Norotte, C., Marga, F. S., Niklason, L. E., & Forgacs, G. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.034 · Cited by 1,339
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Recent advances on the development of magnesium alloys for biodegradable implants
Chen, Y., Xu, Z., Smith, C., & Sankar, J. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.07.005 · Cited by 1,236
Additive manufacturing of polymer-derived ceramics
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., & Schaedler, T. A. (2016) · Science · doi:10.1126/science.aad2688 · Cited by 1,106
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039
Processing of Bulk Metallic Glass
Schroers, J. (2010) · Advanced Materials · doi:10.1002/adma.200902776 · Cited by 1,030
Additive manufacturing of multi-material structures
Bandyopadhyay, A., & Heer, B. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.04.001 · Cited by 1,029
Sanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Aerospace applications of shape memory alloys
Hartl, D. J., & Lagoudas, D. C. (2007) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1243/09544100jaero211 · Cited by 935
Material issues in additive manufacturing: A review
Singh, S., Ramakrishna, S., & Singh, R. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.11.006 · Cited by 899
Projection micro-stereolithography using digital micro-mirror dynamic mask
Sun, C., Fang, N., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 880
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Fused deposition modeling with polypropylene
Carneiro, O. S., Silva, A. F., & Gomes, R. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.06.053 · Cited by 851
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
Wang, Z., Palmer, T. A., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.019 · Cited by 830
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Wang, Z., Guan, K., Gao, M., Li, X., Chen, X., & Zeng, X. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.10.107 · Cited by 812
Denudation of metal powder layers in laser powder bed fusion processes
Matthews, M. J., Guss, G., Khairallah, S. A., Rubenchik, A. M., Depond, P. J., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.017 · Cited by 809
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
Progress in additive manufacturing on new materials: A review
Li, N., Huang, S., Zhang, G., Qin, R., Liu, W., Xiong, H., Shi, G., & Blackburn, J. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.002 · Cited by 776
Parry, L., Ashcroft, I. A., & Wildman, R. D. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.014 · Cited by 739
Fused filament fabrication of fiber-reinforced polymers: A review
Brenken, B., Barocio, E., Favaloro, A., Kunc, V., & Pipes, R. B. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.01.002 · Cited by 737
In vitro studies of biomedical magnesium alloys in a simulated physiological environment: A review
Xin, Y., Hu, T., & Chu, P. K. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.12.004 · Cited by 729
Zhang, L., & Attar, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201500419 · Cited by 721
Deformation and fracture mechanics of engineering materials
(1977) · International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts · doi:10.1016/0148-9062(77)91139-1 · Cited by 712
Human microvasculature fabrication using thermal inkjet printing technology
Cui, X., & Boland, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.056 · Cited by 704
Punetha, V. D., Rana, S., Yoo, H. J., Chaurasia, A., McLeskey, J. T., Ramasamy, M. S., Sahoo, N. G., & Cho, J. W. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.12.010 · Cited by 656
Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
Goh, G. D., Yap, Y. L., Agarwala, S., & Yeong, W. Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800271 · Cited by 621
Lee, C. H., Cook, J. L., Mendelson, A., Moioli, E. K., Yao, H., & Mao, J. J. (2010) · The Lancet · doi:10.1016/s0140-6736(10)60668-x · Cited by 613
Laser based additive manufacturing in industry and academia
Schmidt, M., Merklein, M., Bourell, D., Dimitrov, D., Hausotte, T., Wegener, K., Overmeyer, L., Vollertsen, F., & Levy, G. N. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.011 · Cited by 602
Dependence of mechanical properties of polyamide components on build parameters in the SLS process
Caulfield, B., McHugh, P. E., & Lohfeld, S. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2006.09.007 · Cited by 598
Biomedical Applications of Shape Memory Alloys
Petrini, L., & Migliavacca, F. (2011) · Journal of Metallurgy · doi:10.1155/2011/501483 · Cited by 585
Lee, W., Debasitis, J. C., Lee, V. K., Lee, J.-H., Fischer, K., Edminster, K., Park, J.-K., & Yoo, S.-S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.009 · Cited by 578
A review of rapid prototyping technologies and systems
Yan, X., & Gu, P. (1996) · Computer-Aided Design · doi:10.1016/0010-4485(95)00035-6 · Cited by 565
3D Printing of Polymer Nanocomposites via Stereolithography
Manapat, J. Z., Chen, Q., Ye, P., & Advincula, R. C. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600553 · Cited by 565
Novel Materials for 3D Printing by Photopolymerization
Layani, M., Wang, X., & Magdassi, S. (2018) · Advanced Materials · doi:10.1002/adma.201706344 · Cited by 561
A review of process development steps for new material systems in three dimensional printing (3DP)
Utela, B., Storti, D., Anderson, R., & Ganter, M. (2008) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2009.03.002 · Cited by 548
Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization
Halloran, J. W. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031841 · Cited by 544
Recent developments in polymers/polymer nanocomposites for additive manufacturing
Wu, H., Fahy, W. P., Kim, S., Kim, H., Zhao, N., Pilato, L., Kafi, A., Bateman, S., & Koo, J. H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100638 · Cited by 531
Support Structures for Additive Manufacturing: A Review
Jiang, J., Xu, X., & Stringer, J. (2018) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp2040064 · Cited by 527
Polymeric composites for powder-based additive manufacturing: Materials and applications
Yuan, S., Shen, F., Chua, C. K., & Zhou, K. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.001 · Cited by 525
Viability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Chacón, J. M., Caminero, M. Á., López, P. J. N., Plaza, E. G., García-Moreno, I., & Reverte, J. M. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107688 · Cited by 512
Effects of Defects in Laser Additive Manufactured Ti-6Al-4V on Fatigue Properties
Wycisk, E., Solbach, A., Siddique, S., Herzog, D., Walther, F., & Emmelmann, C. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.120 · Cited by 509
Stress and deformation evaluations of scanning strategy effect in selective laser melting
Cheng, B., Shrestha, S., & Chou, K. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.007 · Cited by 504
Delivery of human fibroblast cells by piezoelectric drop-on-demand inkjet printing
Saunders, R. E., Gough, J. E., & Derby, B. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.09.032 · Cited by 495
Kurzynowski, T., Gruber, K., Stopyra, W., Kuźnicka, B., & Chlebus, E. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.01.103 · Cited by 489
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Zhang, L., Liu, Y., Li, S., & Hao, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700842 · Cited by 486
Hwang, S., Reyes, E. I., Moon, K.-S., Rumpf, R. C., & Kim, N. S. (2015) · Journal of Electronic Materials · doi:10.1007/s11664-014-3425-6 · Cited by 482
Micro-injection moulding of polymer microfluidic devices
Attia, U. M., Marson, S., & Alcock, J. R. (2009) · Microfluidics and Nanofluidics · doi:10.1007/s10404-009-0421-x · Cited by 474
Additive Manufacturing of Biomaterials, Tissues, and Organs
Zadpoor, A. A., & Malda, J. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1719-y · Cited by 462
Rankouhi, B., Javadpour, S., Delfanian, F., & Letcher, T. (2016) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-016-0113-2 · Cited by 457
Lasers in additive manufacturing: A review
Lee, H., Lim, C. H. J., Low, M. J., Tham, N., Murukeshan, V. M., & Kim, Y.-J. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0037-7 · Cited by 449
Bobbio, L. D., Otis, R., Borgonia, J. P., Dillon, R. P., Shapiro, A. A., Liu, Z., & Beese, A. M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.070 · Cited by 447
Processing metallic glasses by selective laser melting
Pauly, S., Löber, L., Petters, R., Stoica, M., Scudino, S., Kühn, U., & Eckert, J. (2013) · Materials Today · doi:10.1016/j.mattod.2013.01.018 · Cited by 446
Kim, B. H., Onses, M. S., Lim, J. B., Nam, S., Oh, N., Kim, H., Yu, K. J., Lee, J. W., Kim, J.-H., Kang, S.-K., et al. (2015) · Nano Letters · doi:10.1021/nl503779e · Cited by 444
Duan, B., Kapetanovic, E., Hockaday, L. A., & Butcher, J. T. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.005 · Cited by 436
Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review
Goh, G. D., Yap, Y. L., Tan, H. K. J., Sing, S. L., Goh, G. L., & Yeong, W. Y. (2020) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408436.2018.1549977 · Cited by 429
Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Murr, L. E., Martinez, E., Hernandez, J., Collins, S., Amato, K. N., Gaytan, S. M., & Shindo, P. W. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70029-7 · Cited by 425
Additive Manufacturing Techniques in Manufacturing -An Overview
Karlapudy, S. P., Nancharaih, T., & Rao, V. V. S. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.11.642 · Cited by 418
3D printing of reinforced concrete elements: Technology and design approach
Asprone, D., Auricchio, F., Menna, C., & Mercuri, V. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.018 · Cited by 413
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
Additive manufacturing of ZrO2‐Al2O3 ceramic components by selective laser melting
Wilkes, J., Hagedorn, Y., Meiners, W., & Wissenbach, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311292736 · Cited by 398
Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
Byambaa, B., Annabi, N., Yue, K., Trujillo‐de Santiago, G., Alvarez, M. M., Jia, W., Kazemzadeh‐Narbat, M., Shin, S. R., Tamayol, A., & Khademhosseini, A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700015 · Cited by 394
Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells
Gaetani, R., Doevendans, P. A., Metz, C. H. G., Alblas, J., Messina, E., Giacomello, A., & Sluijter, J. P. G. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.11.003 · Cited by 383
Additive manufacturing techniques for the production of tissue engineering constructs
Mota, C., Puppi, D., Chiellini, F., & Chiellini, E. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1635 · Cited by 382
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2008) · Tissue Engineering Part A · doi:10.1089/tea.2007.0173 · Cited by 378
Phillippi, J. A., Miller, E., Weiss, L., Huard, J., Waggoner, A., & Campbell, P. (2008) · Stem Cells · doi:10.1634/stemcells.2007-0520 · Cited by 361
Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing
Mueller, B. (2012) · Assembly Automation · doi:10.1108/aa.2012.03332baa.010 · Cited by 359
Zhong, Y., Rännar, L.-E., Liu, L., Koptyug, A., Wikman, S., Olsen, J., Cui, D., & Shen, Z. (2017) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2016.12.042 · Cited by 355
Sutton, A. T., Kriewall, C. S., Leu, M. C., & Newkirk, J. W. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1250605 · Cited by 354
Three‐Dimensional Nanostructures for Photonics
von Freymann, G., Ledermann, A., Thiel, M., Staude, I., Essig, S., Busch, K., & Wegener, M. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901838 · Cited by 352
Patterning human stem cells and endothelial cells with laser printing for cardiac regeneration
Gaebel, R., Ma, N., Liu, J., Guan, J., Koch, L., Klopsch, C., Gruene, M., Toelk, A., Wang, W., Mark, P., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.071 · Cited by 351
Yadroitsev, I., Thivillon, L., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.046 · Cited by 351
Ceramic components manufacturing by selective laser sintering
Bertrand, P., Bayle, F., Combe, C., Goeuriot, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.085 · Cited by 351
Toward engineering functional organ modules by additive manufacturing
Marga, F., Jakab, K., Khatiwala, C., Shepherd, B., Dorfman, S., Hubbard, B., Colbert, S., & Gabor, F. (2012) · Biofabrication · doi:10.1088/1758-5082/4/2/022001 · Cited by 348
Jaisingh Sheoran, A., & Kumar, H. (2020) · Materials Today: Proceedings · doi:10.1016/j.matpr.2019.11.296 · Cited by 342
Ding, D., Pan, Z. S., Cuiuri, D., et al. (2015) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.01.003 · Cited by 336
Advances in additive manufacturing of metal-based functionally graded materials
Reichardt, A., Shapiro, A. A., Otis, R., Dillon, R. P., Borgonia, J. P., McEnerney, B. W., Hosemann, P., & Beese, A. M. (2021) · International Materials Reviews · doi:10.1080/09506608.2019.1709354 · Cited by 334
Wei, K., Gao, M., Wang, Z., & Zeng, X. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.05.092 · Cited by 330
Additive manufacturing of multi-directional preforms for composites: opportunities and challenges
Quan, Z., Wu, A., Keefe, M., Qin, X., Yu, J., Suhr, J., Byun, J.-H., Kim, B.-S., & Chou, T.-W. (2015) · Materials Today · doi:10.1016/j.mattod.2015.05.001 · Cited by 324
Maskery, I., Aboulkhair, N. T., Corfield, M. R., Tuck, C., Clare, A. T., Leach, R. K., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2016) · Materials Characterization · doi:10.1016/j.matchar.2015.12.001 · Cited by 317
Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
Hofmann, D. C., Roberts, S., Otis, R., Kolodziejska, J., Dillon, R. P., Suh, J.-O., Shapiro, A. A., Liu, Z.-K., & Borgonia, J.-P. (2014) · Scientific Reports · doi:10.1038/srep05357 · Cited by 314
Kaufmann, N., Imran, M., Wischeropp, T. M., et al. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.096 · Cited by 314
AlMangour, B., Kim, Y.-K., Grzesiak, D., & Lee, K.-A. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.07.050 · Cited by 312
Current Biomedical Applications of 3D Printing and Additive Manufacturing
Ahangar, P., Cooke, M. E., Weber, M. H., & Rosenzweig, D. H. (2019) · Applied Sciences · doi:10.3390/app9081713 · Cited by 309
Omar, O. M., MOHAMED, M., SyedH., Masood, ., & Bhowmik (2015) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 302
Towards artificial tissue models: past, present, and future of 3D bioprinting
Arslan-Yildiz, A., Assal, R. E., Chen, P., Guven, S., Inci, F., & Demirci, U. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014103 · Cited by 301
Why manufacturers adopt additive manufacturing technologies: The role of sustainability
Niaki, M. K., Torabi, S. A., & Nonino, F. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.019 · Cited by 298
Laser polishing of additive manufactured Ti alloys
Ma, C. P., Guan, Y. C., & Zhou, W. (2017) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2017.02.005 · Cited by 296
Banks, J. P. (2013) · IEEE Pulse · doi:10.1109/mpul.2013.2279617 · Cited by 293
Murr, L. E., Martinez, E., Gaytan, S. M., Ramirez, D. A., Machado, B. I., Shindo, P. W., Martinez, J. L., Medina, F., Wooten, J., Ciscel, D., et al. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0748-2 · Cited by 291
Zareiyan, B., & Khoshnevis, B. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.06.013 · Cited by 288
Direct Inkjet Printing of Dental Prostheses Made of Zirconia
Ebert, J., Özkol, E., Zeichner, A., Uibel, K., Weiss, Ö., Koops, U., Telle, R., & Fischer, H. (2009) · Journal of Dental Research · doi:10.1177/0022034509339988 · Cited by 281
Additive manufacturing of magnesium alloys
Karunakaran, R., Ortgies, S., Tamayol, A., Bobaru, F., & Sealy, M. P. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.12.004 · Cited by 278
Net shaped high performance oxide ceramic parts by selective laser melting
Yves-Christian, H., Jan, W., Wilhelm, M., Konrad, W., & Reinhart, P. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.086 · Cited by 276
Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review
Pervaiz, S., Rashid, A., Deiab, I., & Nicolescu, M. (2014) · Materials and Manufacturing Processes · doi:10.1080/10426914.2014.880460 · Cited by 276
Hu, Y., & Cong, W. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.08.083 · Cited by 276
Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
Qian, M., Xu, W., Brandt, M., & Tang, H. P. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.215 · Cited by 275
Density and mechanical properties in selective laser melting of Invar 36 and stainless steel 316L
Yakout, M., Elbestawi, M. A., & Veldhuis, S. C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.11.006 · Cited by 275
Additive manufacturing of magnetic materials
Chaudhary, V., Mantri, S. A., Ramanujan, R. V., & Banerjee, R. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100688 · Cited by 275
Kunce, I., Polanski, M., & Bystrzycki, J. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.05.071 · Cited by 273
Recent Advancements in Bulk Metallic Glasses and Their Applications: A Review
Khan, M. M., Nemati, A., Rahman, Z. U., Shah, U. H., Asgar, H., & Haider, W. (2018) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408436.2017.1358149 · Cited by 273
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0173 · Cited by 273
Kunce, I., Polanski, M., & Bystrzycki, J. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.02.067 · Cited by 272
Biomedical titanium alloys and their additive manufacturing
Hao, Y., Li, S., & Yang, R. (2016) · Rare Metals · doi:10.1007/s12598-016-0793-5 · Cited by 267
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
Yasa, E., Kruth, J.-P., & Deckers, J. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.03.063 · Cited by 265
Electrohydrodynamic direct-writing
Huang, Y., Bu, N., Duan, Y., Pan, Y., Liu, H., Yin, Z., & Xiong, Y. (2013) · Nanoscale · doi:10.1039/c3nr04329k · Cited by 258
ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems
Asme, A. S. O. M. E. (2013) · HAL (Le Centre pour la Communication Scientifique Directe) · doi:10.1115/smasis2013 · Cited by 252
3D printing of hydrogel composite systems: Recent advances in technology for tissue engineering
Jang, T.-S., Jung, H.-D., Pan, H. M., Han, W. T., Chen, S., & Song, J. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v4i1.126 · Cited by 251
Stress and Deformation Evaluations of Scanning Strategy Effect in Selective Laser Melting
Cheng, B., Shrestha, S., & Chou, Y. K. (2016) · Volume 3: Joint MSEC-NAMRC Symposia · doi:10.1115/msec2016-8819 · Cited by 250
Nandwana, P., Elliott, A. M., Siddel, D., Merriman, A., Peter, W. H., & Babu, S. S. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.002 · Cited by 249
Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation
Ilkhanizadeh, S., Teixeira, A. I., & Hermanson, O. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.018 · Cited by 246
Additive manufacturing of NiTi shape memory alloys using pre-mixed powders
Wang, C., Tan, X. P., Du, Z., Chandra, S., Sun, Z., Lim, C. W. J., Tor, S. B., Lim, C. S., & Wong, C. H. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.025 · Cited by 245
Recent developments in the use of two‐photon polymerization in precise 2D and 3D microfabrications
Lee, K., Yang, D., Park, S. H., & Kim, R. H. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.664 · Cited by 242
Additive Manufacture of Ceramics Components by Inkjet Printing
Derby, B. (2015) · Engineering · doi:10.15302/j-eng-2015014 · Cited by 239
Additive manufacturing of cardiovascular CoCr stents by selective laser melting
Demir, A. G., & Previtali, B. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.091 · Cited by 235
Additive Manufacturing of Precision Biomaterials
Guzzi, E. A., & Tibbitt, M. W. (2020) · Advanced Materials · doi:10.1002/adma.201901994 · Cited by 234
Brandl, E., Palm, F., Michailov, V., Viehweger, B., & Leyens, C. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.06.062 · Cited by 230
Strain rate sensitivity and fracture mechanism of AlSi10Mg parts produced by Selective Laser Melting
Rosenthal, I., Stern, A., & Frage, N. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.11.070 · Cited by 224
Zhang, X.-Y., Fang, G., & Zhou, J. (2017) · Materials · doi:10.3390/ma10010050 · Cited by 222
Processing of Bulk Alumina Ceramics Using Laser Engineered Net Shaping
Balla, V. K., Bose, S., & Bandyopadhyay, A. (2008) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2008.02202.x · Cited by 217
Additive Manufacturing Technologies
Stampfl, J., & Hatzenbichler, M. (2014) · Springer eBooks · doi:10.1007/978-3-642-20617-7_6492 · Cited by 213
The selection of process parameters in additive manufacturing for aerospace alloys
Yakout, M., Cadamuro, A., Elbestawi, M. A., & Veldhuis, S. C. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0280-7 · Cited by 209
Kunce, I., Polański, M., Karczewski, K., Płociński, T., & Kurzydłowski, K. J. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.144 · Cited by 206
Ackland, D. C., Robinson, D. L., Redhead, M., Lee, P. V. S., Moskaljuk, A., & Dimitroulis, G. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.01.048 · Cited by 206
Ker, E. D. F., Nain, A. S., Weiss, L. E., Wang, J., Suhan, J., Amon, C. H., & Campbell, P. G. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.025 · Cited by 205
Direct laser metal deposition of Inconel 738
Ramakrishnan, A., & Dinda, G. P. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.10.020 · Cited by 204
Zhu, Y., Tian, X., Li, J., & Wang, H. (2015) · Materials & Design · doi:10.1016/j.matdes.2014.11.001 · Cited by 203
Wycisk, E., Siddique, S., Herzog, D., Walther, F., & Emmelmann, C. (2015) · Frontiers in Materials · doi:10.3389/fmats.2015.00072 · Cited by 193
Huang, S., Yao, B., Xie, J., & Fu, X. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.12.039 · Cited by 187
Miranda, G., Faria, S., Bartolomeu, F., Pinto, E., Madeira, S., Mateus, A., Carreira, P., Alves, N., Silva, F. S., & Carvalho, O. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.01.028 · Cited by 187
Bahl, S., Suwas, S., & Chatterjee, K. (2021) · International Materials Reviews · doi:10.1080/09506608.2020.1735829 · Cited by 187
Alumina–zirconium ceramics synthesis by selective laser sintering/melting
Shishkovsky, I., Yadroitsev, I., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.09.001 · Cited by 186
Chohan, J. S., Singh, R., Boparai, K. S., Penna, R., & Fraternali, F. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.02.045 · Cited by 185
O’Connor, H. J., Dickson, A. N., & Dowling, D. P. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.05.035 · Cited by 185
New Developments of Laser Processing Aluminium Alloys via Additive Manufacturing Technique
Bartkowiak, K., Ullrich, S., Frick, T., & Schmidt, M. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.050 · Cited by 183
3D printing of open-porous cellular ceramics with high specific strength
Maurath, J., & Willenbacher, N. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.06.001 · Cited by 182
In vitro degradation and cell attachment of a PLGA coated biodegradable Mg–6Zn based alloy
Li, J. N., Cao, P., Zhang, X. N., Zhang, S. X., & He, Y. H. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4688-9 · Cited by 177
4D printing of net shape parts made from Ni-Mn-Ga magnetic shape-memory alloys
Caputo, M. P., Berkowitz, A. E., Armstrong, A., Müllner, P., & Solomon, C. V. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.028 · Cited by 176
Tailoring the grain structure of IN718 during selective electron beam melting
Körner, C., Helmer, H., Bauereiß, A., & Singer, R. F. (2014) · MATEC Web of Conferences · doi:10.1051/matecconf/20141408001 · Cited by 174
Vora, P., Mumtaz, K., Todd, I., & Hopkinson, N. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.06.003 · Cited by 173
Micro/nanoscale electrohydrodynamic printing: from 2D to 3D
Zhang, B., He, J., Li, X., Xu, F., & Li, D. (2016) · Nanoscale · doi:10.1039/c6nr04106j · Cited by 172
Murr, L. E. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.12.015 · Cited by 171
Zinc in calcium phosphate mediates bone induction: In vitro and in vivo model
Luo, X., Barbieri, D., Davison, N., Yan, Y., de Bruijn, J. D., & Yuan, H. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.011 · Cited by 170
Wu, P. K., & Ringeisen, B. R. (2010) · Biofabrication · doi:10.1088/1758-5082/2/1/014111 · Cited by 168
An Overview on Additive Manufacturing of Polymers
Jasiuk, I., Abueidda, D. W., Kozuch, C., Pang, S., Su, F. Y., & McKittrick, J. (2018) · JOM · doi:10.1007/s11837-017-2730-y · Cited by 166
3D Powder Printing of β‐Tricalcium Phosphate Ceramics Using Different Strategies
Vorndran, E., Klarner, M., Klammert, U., Grover, L. M., Patel, S., Barralet, J. E., & Gbureck, U. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800179 · Cited by 164
Influence of energy density on metallurgy and properties in metal additive manufacturing
Yusuf, S. M., & Gao, N. (2017) · Materials Science and Technology · doi:10.1080/02670836.2017.1289444 · Cited by 163
Zaman, U. K. U., Rivette, M., Siadat, A., & Mousavi, S. M. (2017) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.12.005 · Cited by 163
A review of the fatigue behavior of 3D printed polymers
Safai, L., Cuellar, J. S., Smit, G., & ZADPOOR, A. A. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.03.023 · Cited by 152
Rapid manufacturing: the technologies and applications of rapid prototyping and rapid tooling
Pham, D. T., & Dimov, S. (2001) · Cited by 151
Li, X., Kang, C. W., Huang, H., & Sercombe, T. B. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.06.022 · Cited by 151
Mostafaei, A., Kimes, K. A., Stevens, E. L., Toman, J., Krimer, Y. L., Ullakko, K., & Chmielus, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.04.010 · Cited by 149
Investigation of 3D Non-Random Porous Structures by Fused Deposition Modelling
Too, M. H., Leong, K. F., Chua, C. K., Du, Z., Yang, S., Cheah, C. M., & Ho, S. L. (2002) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s001700200016 · Cited by 148
Selective laser melting of La(Fe,Co,Si)13 geometries for magnetic refrigeration
Moore, J. D. P., Klemm, D., Lindackers, D., Grasemann, S., Träger, R., Eckert, J., Löber, L., Scudino, S., Katter, M., Barcza, A., et al. (2013) · Journal of Applied Physics · doi:10.1063/1.4816465 · Cited by 139
Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing
Brice, C., Shenoy, R. N., Kral, M. V., & Buchannan, K. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.08.088 · Cited by 138
Micro laser metal wire deposition for additive manufacturing of thin-walled structures
Demir, A. G. (2017) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2017.07.003 · Cited by 138
Formation of a Huesler-like L21 phase in a CoCrCuFeNiAlTi high-entropy alloy
Choudhuri, D., Alam, T., Borkar, T., Gwalani, B., Mantri, A. S., Srinivasan, S. G., Gibson, M. A., & Banerjee, R. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2014.12.006 · Cited by 137
An insight into additive manufacturing of fiber reinforced polymer composite
Zindani, D., & Kumar, K. (2019) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2019.08.004 · Cited by 136
Microstructure and mechanical properties of laser forming repaired 17-4PH stainless steel
Lin, X., Cao, Y., Wu, X., Yang, H., Chen, J., & Huang, W. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.05.095 · Cited by 135
Part Build Orientations Based on Volumetric Error in Fused Deposition Modelling
Masood, S. H., Rattanawong, W., & Iovenitti, P. (2000) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s001700050022 · Cited by 134
Spoerk, M., Savandaiah, C., Arbeiter, F. J., Sapkota, J., & Holzer, C. (2017) · Polymer Composites · doi:10.1002/pc.24701 · Cited by 133
Towards V-based high-entropy alloys for nuclear fusion applications
Barron, P. J., Carruthers, A. W., Fellowes, J., Jones, N. G., Dawson, H. I., & Pickering, E. J. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.09.028 · Cited by 132
Yang, Y., Li, L., & Zhao, J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.12.009 · Cited by 131
Song, S. Y., Park, M. S., Lee, D., Lee, J. W., & Yun, J. S. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107960 · Cited by 127
Cited by
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 450
Rheological characterisation of ceramic inks for 3D direct ink writing: A review
del-Mazo-Barbara, L., & Ginebra, M.-P. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.08.031 · Cited by 444
Alami, A. H., Ghani Olabi, A., Alashkar, A., Alasad, S., Aljaghoub, H., Rezk, H., & Abdelkareem, M. A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2023.102516 · Cited by 349
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Metadata
- Authors
- Bhuvanesh Kumar, M., & Sathiya, P.
- Venue
- Thin-Walled Structures
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 159
- Pages
- 107228
- ISSN
- 0263-8231 (ISSN-L)
- OpenAlex
- W3095578584
- Cited by
- 372
- References
- 273
- FWCI
- 14.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.