Sulfur recirculation for increased electricity production in Waste-to-Energy plants
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
Sulfur recirculation is a new technology for reducing boiler corrosion and dioxin formation. It was demonstrated in full-scale tests at a Waste to Energy plant in Göteborg (Sweden) during nearly two months of operation. Sulfur was recirculated as sulfuric acid from the flue gas cleaning back to the boiler, thus creating a sulfur loop. The new technology was evaluated by extensive measurement campaigns during operation under normal conditions (reference case) and operation with sulfur recirculation. The chlorine content of both fly ash and boiler ash decreased and the sulfur content increased during the sulfur recirculation tests. The deposit growth and the particle concentration decreased with sulfur recirculation and the dioxin concentration (I-TEQ) of the flue gas was reduced by approximately 25%. Sulfuric acid dew point measurements showed that the sulfuric acid dosage did not lead to elevated SO3 concentrations, which may otherwise induce low temperature corrosion. In the sulfur recirculation corrosion probe exposures, the corrosion rate decreased for all tested materials (16Mo3, Sanicro 28 and Inconel 625) and material temperatures (450 °C and 525 °C) compared to the reference exposure. The corrosion rates were reduced by 60-90%. Sulfur recirculation prevented the formation of transition metal chlorides at the metal/oxide interface, formation of chromate and reduced the presence of zinc in the corrosion products. Furthermore, measured corrosion rates at 525 °C with sulfur recirculation in operation were similar or lower compared to those measured at 450 °C material temperature in reference conditions, which corresponds to normal operation at normal steam temperatures. This implies that sulfur recirculation allows for higher steam data and electricity production without increasing corrosion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Boiler deposits from firing biomass fuels
Miles, T. R., Miles, T. R., Baxter, L. L., Bryers, R. W., Jenkins, B. M., & Oden, L. L. (1996) · Biomass and Bioenergy · doi:10.1016/0961-9534(95)00067-4 · Cited by 420 · cited 1×
“Some of it reacts with alkali to form volatile alkali chlorides (Miles et al., 1996; Olsson et al., 1997) and the rest is HCl(g).”
BackgroundAsteman, H., Svensson, J.-E., Johansson, L.-G., & Norell, M. (1999) · Oxidation of Metals · doi:10.1023/a:1018875024306 · Cited by 304
Alkali Metal Emission during Pyrolysis of Biomass
Olsson, J. G., Jäglid, U., Pettersson, J. B. C., & Hald, P. (1997) · Energy & Fuels · doi:10.1021/ef960096b · Cited by 261 · cited 1×
“Some of it reacts with alkali to form volatile alkali chlorides (Miles et al., 1996; Olsson et al., 1997) and the rest is HCl(g).”
BackgroundMechanism and modeling of the formation of gaseous alkali sulfates
Glarborg, P., & Marshall, P. (2005) · Combustion and Flame · doi:10.1016/j.combustflame.2004.08.014 · Cited by 260
KCl Induced Corrosion of a 304-type Austenitic Stainless Steel at 600°C; The Role of Potassium
Pettersson, J., Asteman, H., Svensson, J. E., & Johansson, L. G. (2005) · Oxidation of Metals · doi:10.1007/s11085-005-5704-3 · Cited by 182
Sulfation of Potassium Chloride at Combustion Conditions
Iisa, K., Lu, Y., & Salmenoja, K. (1999) · Energy & Fuels · doi:10.1021/ef990057a · Cited by 169
Pilot-Scale Investigation of the Influence of Coal−Biomass Cofiring on Ash Deposition
Robinson, A. L., Junker, H., & Baxter, L. L. (2002) · Energy & Fuels · doi:10.1021/ef010128h · Cited by 159
Halvarsson, M., Tang, J. E., Asteman, H., Svensson, J.-E., & Johansson, L.-G. (2006) · Corrosion Science · doi:10.1016/j.corsci.2005.08.012 · Cited by 146
Pettersson, J., Folkeson, N., Johansson, L.-G., & Svensson, J.-E. (2011) · Oxidation of Metals · doi:10.1007/s11085-011-9240-z · Cited by 117 · cited 1×
“The mitigating effect of sulfating alkali chlorides and alkali carbonates into corresponding alkali sulfates on corrosion has been shown in the laboratory (Pettersson et al., 2011).”
BackgroundPettersson, C., Pettersson, J., Asteman, H., Svensson, J.-E., & Johansson, L.-G. (2006) · Corrosion Science · doi:10.1016/j.corsci.2005.05.018 · Cited by 112
Cited by
Ma, W., Wenga, T., Frandsen, F. J., Yan, B., & Chen, G. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100789 · Cited by 275
Karlsson, S., Åmand, L.-E., & Liske, J. (2015) · Fuel · doi:10.1016/j.fuel.2014.09.007 · Cited by 79
“This includes sulphur-based additives such as elemental sulphur (S) [15,22,24,25,28] and ammonium sulphate ((NH4)SO4) [24–26,29], sulphur recirculation [27] or by co-combustion of waste and biomass with coal, peat and municipal sewage sludge [21,23,26,30–33].”
BackgroundSelf-citationPhother-Simon, J., Hanif, I., Jonsson, T., & Liske, J. (2024) · Fuel · doi:10.1016/j.fuel.2023.130012 · Cited by 21
Self-citationHigh temperature corrosion memory in a waste fired boiler – Influence of sulfur
Paz, M. D., Phother-Simon, J., Andersson, S., & Jonsson, T. (2021) · Waste Management · doi:10.1016/j.wasman.2021.05.005 · Cited by 17
Self-citation
Metadata
- Authors
- Andersson, S., Blomqvist, E. W., Bäfver, L., Jones, F., Davidsson, K., Froitzheim, J., Karlsson, M., Larsson, E., & Liske, J.
- Venue
- Waste Management
- Publisher
- Elsevier BV
- Published
- 2014-01
- Volume
- 34
- Issue
- 1
- Pages
- 67-78
- ISSN
- 0956-053X (ISSN-L)
- OpenAlex
- W1988643587
- Cited by
- 45
- References
- 13
- FWCI
- 4.87
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Sulfur recirculation for increased electricity production in Waste-to-Energy plants. https://app.cochat.ai/papers/10.1016/j.wasman.2013.09.002
- The paper
- Andersson, S., Blomqvist, E. W., Bäfver, L., Jones, F., Davidsson, K., Froitzheim, J., Karlsson, M., Larsson, E., & Liske, J. (2014). Sulfur recirculation for increased electricity production in Waste-to-Energy plants. Waste Management. https://doi.org/10.1016/j.wasman.2013.09.002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.