The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Waste paper: An underutilized but promising source for nanocellulose mining
Abstract
Nanocellulose has achieved an inimitable place and value in nano-materials research sector. Promising and exclusive physical, chemical and biological properties of nanocellulose make it an attractive and ideal material for various high end-user applications. Conventionally, the base material for nanocellulose i.e. cellulose is being extracted from various lignocellulosic raw materials (like wood, agro-industrial-residues, etc.) using pulping followed by bleaching sequences. As an alternate to lignocellulosic raw materials, waste paper also showed potential as a competent raw material due to its abundant availability and high cellulosic content (60-70%) with comparatively less hemicelluloses (10-20%) and lignin (5-10%) without any harsh treatments. The production yields of nanocellulose were reported to vary from 1.5% to 64% depending upon the waste papers and treatments given. The diameters of these nanocelluloses were reported in the range of 2-100 nm and crystallinity range around 54-95%. Thermal degradation of waste paper nanocellulose was varied from 187 °C to 371 °C. Although these properties are comparable with the nanocellulose obtained from lignocellulosic raw materials, yet waste paper is an underutilized source for nanocellulose preparation due to its ordinary fate of recycling, dumping and incineration. In the sight of necessity and possibility of waste paper utilization, this article reviews the outcomes of research carried out for preparation of nanocellulose using waste paper as a source of cellulose. There is a need of sincere investigation to convert this valuable waste to wealth i.e. waste papers to nanocellulose, which will be helpful in solid waste management to protect environment in economical way.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Bacterial synthesized cellulose — artificial blood vessels for microsurgery
Klemm, D., Schumann, D., Udhardt, U., & Marsch, S. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00021-1 · Cited by 1,334
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
Henriksson, M., Henriksson, G., Berglund, L. A., & Lindström, T. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.05.038 · Cited by 1,183
Rosa, M. F., Medeiros, E. S., Malmonge, J. A., Gregorski, K. S., Wood, D. F., Mattoso, L. H. C., Glenn, G., Orts, W. J., & Imam, S. H. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.01.059 · Cited by 1,099
Francisco, M., van den Bruinhorst, A., & Kroon, M. C. (2012) · Green Chemistry · doi:10.1039/c2gc35660k · Cited by 814
Biocomposites from wheat straw nanofibers: morphology, thermal and mechanical properties
Alemdar, A., & Sain, M. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.05.044 · Cited by 661
Nakagaito, A. N., & Yano, H. (2004) · Applied Physics A: Materials Science & Processing · doi:10.1007/s00339-003-2453-5 · Cited by 608
Cellulose fibrils for polymer reinforcement
Zimmermann, T., Pöhler, E., & Geiger, T. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200400097 · Cited by 598
Tailoring Mechanical Properties of Aerogels for Aerospace Applications
Randall, J. P., Meador, M. A. B., & Jana, S. C. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200007n · Cited by 579
Abdul Khalil, H. P. S., Davoudpour, Y., Saurabh, C. K., Hossain, M. S., Adnan, A. S., Dungani, R., Paridah, M. T., Islam Sarker, M. Z., Fazita, M. R. N., Syakir, M. I., et al. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.072 · Cited by 306
Cited by
Nanocellulose: From Fundamentals to Advanced Applications
Trache, D., Tarchoun, A. F., Derradji, M., Hamidon, T. S., Masruchin, N., Brosse, N., & Hussin, M. H. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00392 · Cited by 1,309
Nanocellulose in food packaging: A review
Ahankari, S. S., Subhedar, A. R., Bhadauria, S. S., & Dufresne, A. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117479 · Cited by 371
Nanocellulose-Based Nanocomposites for Sustainable Applications: A Review
Norizan, M. N., Shazleen, S. S., Alias, A. H., Sabaruddin, F. A., Asyraf, M. R. M., Zainudin, E. S., Abdullah, N., Samsudin, M. S., Kamarudin, S. H., & Norrrahim, M. N. F. (2022) · Nanomaterials · doi:10.3390/nano12193483 · Cited by 271
Preparation of hemp nanocellulose and its use to improve the properties of paper for food packaging
Barbash, V. A., Yashchenko, O. V., Yakymenko, O. S., Zakharko, R. M., & Myshak, V. D. (2022) · Cellulose · doi:10.1007/s10570-022-04773-6 · Cited by 45
Metadata
- Authors
- Kumar, V., Pathak, P., & Bhardwaj, N. K.
- Venue
- Waste Management
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 102
- Pages
- 281-303
- ISSN
- 0956-053X (ISSN-L)
- OpenAlex
- W2984106696
- Cited by
- 175
- References
- 13
- FWCI
- 4.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.