The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Rolling element bearing diagnostics using the Case Western Reserve University data: A benchmark study
Open accessAbstract
Abstract Vibration-based rolling element bearing diagnostics is a very well-developed field, yet researchers continue to develop new diagnostic algorithms quite frequently. Over the last decade, data from the Case Western Reserve University (CWRU) Bearing Data Center has become a standard reference used to test these algorithms, yet without any recognised benchmark it is difficult to properly assess the performance of any proposed diagnostic methods. There is, then, a clear need to examine the data thoroughly and to categorise it appropriately, and this paper intends to fulfil that objective. To do so, three established diagnostic techniques are applied to the entire CWRU data set, and the diagnostic outcomes are provided and discussed in detail. Recommendations are given as to how the data might best be used, and also on how any future benchmark data should be generated. Though intended primarily as a benchmark to aid in testing new diagnostic algorithms, it is also hoped that much of the discussion will have broader applicability to other bearing diagnostics cases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rolling element bearing diagnostics—A tutorial
Randall, R. B., & Antoni, J. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.07.017 · Cited by 2,744
Self-citationFast computation of the kurtogram for the detection of transient faults
Antoni, J. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.12.002 · Cited by 1,601
Model for the vibration produced by a single point defect in a rolling element bearing
McFadden, P. D., & Smith, J. D. (1984) · Journal of Sound and Vibration · doi:10.1016/0022-460x(84)90595-9 · Cited by 931
Borghesani, P., Pennacchi, P., Randall, R. B., Sawalhi, N., & Ricci, R. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.11.001 · Cited by 221
Self-citationUnsupervised noise cancellation for vibration signals: part II—a novel frequency-domain algorithm
Antoni, J., & Randall, R. B. (2003) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00013-x · Cited by 164
Self-citationWavelet leaders multifractal features based fault diagnosis of rotating mechanism
Du, W., Tao, J., Li, Y., & Liu, C. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.09.003 · Cited by 140
Jiang, L., Xuan, J., & Shi, T. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.05.017 · Cited by 103
Cited by
A new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222
Lessmeier, C., Kimotho, J. K., Zimmer, D., & Sextro, W. (2016) · PHM Society European Conference · doi:10.36001/phme.2016.v3i1.1577 · Cited by 1,268
Convolutional Neural Network Based Fault Detection for Rotating Machinery
Janssens, O., Slavkovikj, V., Vervisch, B., Stockman, K., Loccufier, M., Verstockt, S., Van de Walle, R., & Van Hoecke, S. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.05.027 · Cited by 1,255
A New Deep Transfer Learning Based on Sparse Auto-Encoder for Fault Diagnosis
Wen, L., Gao, L., & Li, X. (2019) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2017.2754287 · Cited by 1,095
Lu, C., Wang, Z.-Y., Qin, W.-L., & Ma, J. (2017) · Signal Processing · doi:10.1016/j.sigpro.2016.07.028 · Cited by 775
Metadata
- Authors
- Smith, W. A., & Randall, R. B.
- Venue
- Mechanical Systems and Signal Processing
- Publisher
- Elsevier BV
- Published
- 2015-12
- Volume
- 64-65
- Pages
- 100-131
- ISSN
- 0888-3270 (ISSN-L)
- OpenAlex
- W243674440
- Cited by
- 2,719
- References
- 7
- FWCI
- 47.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.