The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Rolling element bearing diagnostics using the Case Western Reserve University data: A benchmark study
Open accessAbstract
Abstract Vibration-based rolling element bearing diagnostics is a very well-developed field, yet researchers continue to develop new diagnostic algorithms quite frequently. Over the last decade, data from the Case Western Reserve University (CWRU) Bearing Data Center has become a standard reference used to test these algorithms, yet without any recognised benchmark it is difficult to properly assess the performance of any proposed diagnostic methods. There is, then, a clear need to examine the data thoroughly and to categorise it appropriately, and this paper intends to fulfil that objective. To do so, three established diagnostic techniques are applied to the entire CWRU data set, and the diagnostic outcomes are provided and discussed in detail. Recommendations are given as to how the data might best be used, and also on how any future benchmark data should be generated. Though intended primarily as a benchmark to aid in testing new diagnostic algorithms, it is also hoped that much of the discussion will have broader applicability to other bearing diagnostics cases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rolling element bearing diagnostics—A tutorial
Randall, R. B., & Antoni, J. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.07.017 · Cited by 2,744
Self-citationFast computation of the kurtogram for the detection of transient faults
Antoni, J. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.12.002 · Cited by 1,601
Model for the vibration produced by a single point defect in a rolling element bearing
McFadden, P. D., & Smith, J. D. (1984) · Journal of Sound and Vibration · doi:10.1016/0022-460x(84)90595-9 · Cited by 931
Borghesani, P., Pennacchi, P., Randall, R. B., Sawalhi, N., & Ricci, R. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.11.001 · Cited by 221
Self-citationUnsupervised noise cancellation for vibration signals: part II—a novel frequency-domain algorithm
Antoni, J., & Randall, R. B. (2003) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00013-x · Cited by 164
Self-citationWavelet leaders multifractal features based fault diagnosis of rotating mechanism
Du, W., Tao, J., Li, Y., & Liu, C. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.09.003 · Cited by 140
Jiang, L., Xuan, J., & Shi, T. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.05.017 · Cited by 103
Cited by
A new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222
Lessmeier, C., Kimotho, J. K., Zimmer, D., & Sextro, W. (2016) · PHM Society European Conference · doi:10.36001/phme.2016.v3i1.1577 · Cited by 1,268
Convolutional Neural Network Based Fault Detection for Rotating Machinery
Janssens, O., Slavkovikj, V., Vervisch, B., Stockman, K., Loccufier, M., Verstockt, S., Van de Walle, R., & Van Hoecke, S. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.05.027 · Cited by 1,255
A New Deep Transfer Learning Based on Sparse Auto-Encoder for Fault Diagnosis
Wen, L., Gao, L., & Li, X. (2019) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2017.2754287 · Cited by 1,095
Lu, C., Wang, Z.-Y., Qin, W.-L., & Ma, J. (2017) · Signal Processing · doi:10.1016/j.sigpro.2016.07.028 · Cited by 775
A transfer convolutional neural network for fault diagnosis based on ResNet-50
Wen, L., Li, X., & Gao, L. (2020) · Neural Computing and Applications · doi:10.1007/s00521-019-04097-w · Cited by 764
A review of the application of deep learning in intelligent fault diagnosis of rotating machinery
Zhu, Z., Lei, Y., Qi, G., Chai, Y., Mazur, N., An, Y., & Huang, X. (2023) · Measurement · doi:10.1016/j.measurement.2022.112346 · Cited by 731
A generic intelligent bearing fault diagnosis system using compact adaptive 1D CNN classifier
Eren, L., Ince, T., & Kiranyaz, S. (2019) · Journal of Signal Processing Systems · doi:10.1007/s11265-018-1378-3 · Cited by 723
Fault diagnosis of rolling bearings with recurrent neural network-based autoencoders
Liu, H., Zhou, J., Zheng, Y., Jiang, W., & Zhang, Y. (2018) · ISA Transactions · doi:10.1016/j.isatra.2018.04.005 · Cited by 606
A comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
Neupane, D., & Seok, J. (2020) · IEEE Access · doi:10.1109/access.2020.2990528 · Cited by 568
Zhao, C., Zio, E., & Shen, W. (2024) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2024.109964 · Cited by 521
Multisynchrosqueezing Transform
Yu, G., Wang, Z., & Zhao, P. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2868296 · Cited by 501
Multi-Layer domain adaptation method for rolling bearing fault diagnosis
Li, X., Zhang, W., Ding, Q., & Sun, J.-Q. (2019) · Signal Processing · doi:10.1016/j.sigpro.2018.12.005 · Cited by 477
Chen, Z., Mauricio, A., Li, W., & Gryllias, K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106683 · Cited by 470
Moshrefzadeh, A., & Fasana, A. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.12.009 · Cited by 459
Lu, C., Wang, Z., & Zhou, B. (2017) · Advanced Engineering Informatics · doi:10.1016/j.aei.2017.02.005 · Cited by 434
Fast computation of the spectral correlation
Antoni, J., Xin, G., & Hamzaoui, N. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.01.011 · Cited by 432
Intelligent Bearing Fault Diagnosis Method Combining Compressed Data Acquisition and Deep Learning
Sun, J., Yan, C., & Wen, J. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2759418 · Cited by 422
Limited Data Rolling Bearing Fault Diagnosis With Few-Shot Learning
Zhang, A., Li, S., Cui, Y., Yang, W., Dong, R., & Hu, J. (2019) · IEEE Access · doi:10.1109/access.2019.2934233 · Cited by 419
Deep residual learning-based fault diagnosis method for rotating machinery
Zhang, W., Li, X., & Ding, Q. (2019) · ISA Transactions · doi:10.1016/j.isatra.2018.12.025 · Cited by 416
Verstraete, D., Ferrada, A., Droguett, E. L., Meruane, V., & Modarres, M. (2017) · Shock and Vibration · doi:10.1155/2017/5067651 · Cited by 415
Intelligent rotating machinery fault diagnosis based on deep learning using data augmentation
Li, X., Zhang, W., Ding, Q., & Sun, J.-Q. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1456-1 · Cited by 404
Cross-Domain Fault Diagnosis of Rolling Element Bearings Using Deep Generative Neural Networks
Li, X., Zhang, W., & Ding, Q. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2868023 · Cited by 396
Deep discriminative transfer learning network for cross-machine fault diagnosis
Qian, Q., Qin, Y., Luo, J., Wang, Y., & Wu, F. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109884 · Cited by 394
GAN-based anomaly detection: A review
Xia, X., Pan, X., Li, N., He, X., Ma, L., Zhang, X., & Ding, N. (2022) · Neurocomputing · doi:10.1016/j.neucom.2021.12.093 · Cited by 392
Li, X., Zhang, W., & Ding, Q. (2019) · Signal Processing · doi:10.1016/j.sigpro.2019.03.019 · Cited by 383
Machinery fault diagnosis with imbalanced data using deep generative adversarial networks
Zhang, W., Li, X., Jia, X.-D., Ma, H., Luo, Z., & Li, X. (2020) · Measurement · doi:10.1016/j.measurement.2019.107377 · Cited by 364
Brito, L. C., Susto, G. A., Brito, J. N., & Duarte, M. A. V. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108105 · Cited by 343
Li, W., Zhong, X., Shao, H., Cai, B., & Yang, X. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101552 · Cited by 340
Fault diagnosis of rotating machinery based on recurrent neural networks
Zhang, Y., Zhou, T., Huang, X., Cao, L., & Zhou, Q. (2021) · Measurement · doi:10.1016/j.measurement.2020.108774 · Cited by 339
Diagnosisformer: An efficient rolling bearing fault diagnosis method based on improved Transformer
Hou, Y., Wang, J., Chen, Z., Ma, J., & Li, T. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106507 · Cited by 321
Federated learning for machinery fault diagnosis with dynamic validation and self-supervision
Zhang, W., Li, X., Ma, H., Luo, Z., & Li, X. (2021) · Knowledge-Based Systems · doi:10.1016/j.knosys.2020.106679 · Cited by 301
Diagnosing Rotating Machines With Weakly Supervised Data Using Deep Transfer Learning
Li, X., Zhang, W., Ding, Q., & Li, X. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2927590 · Cited by 298
Pan, J., Zi, Y., Chen, J., Zhou, Z., & Wang, B. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2767540 · Cited by 294
Improvement of kurtosis-guided-grams via Gini index for bearing fault feature identification
Miao, Y., Zhao, M., & Lin, J. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa8a57 · Cited by 282
Zhang, W., Li, X., Ma, H., Luo, Z., & Li, X. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3054651 · Cited by 282
Su, H., Xiang, L., Hu, A., Xu, Y., & Yang, X. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108765 · Cited by 281
Song, B., Liu, Y., Fang, J., Liu, W., Zhong, M., & Liu, X. (2024) · Neurocomputing · doi:10.1016/j.neucom.2024.127284 · Cited by 273
Li, X., Zhang, W., & Ding, Q. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.05.021 · Cited by 271
Wang, S., Xiang, J., Zhong, Y., & Zhou, Y. (2018) · Knowledge-Based Systems · doi:10.1016/j.knosys.2017.12.027 · Cited by 269
Deep transfer learning with limited data for machinery fault diagnosis
Han, T., Liu, C., Wu, R., & Jiang, D. (2021) · Applied Soft Computing · doi:10.1016/j.asoc.2021.107150 · Cited by 268
Universal Domain Adaptation in Fault Diagnostics With Hybrid Weighted Deep Adversarial Learning
Zhang, W., Li, X., Ma, H., Luo, Z., & Li, X. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3064377 · Cited by 268
Chen, J., Huang, R., Chen, Z., Mao, W., & Li, W. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110239 · Cited by 267
A New Deep Transfer Learning Method for Bearing Fault Diagnosis Under Different Working Conditions
Zhu, J., Chen, N., & Shen, C. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2936932 · Cited by 266
Feng, Y., Chen, J., Xie, J., Zhang, T., Lv, H., & Pan, T. (2022) · Knowledge-Based Systems · doi:10.1016/j.knosys.2021.107646 · Cited by 262
Simulation-driven machine learning: Bearing fault classification
Sobie, C., Freitas, C., & Nicolai, M. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.025 · Cited by 256
The Politecnico di Torino rolling bearing test rig: Description and analysis of open access data
Daga, A. P., Fasana, A., Marchesiello, S., & Garibaldi, L. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.10.010 · Cited by 254
Feng, Y., Chen, J., Zhang, T., He, S., Xu, E., & Zhou, Z. (2022) · ISA Transactions · doi:10.1016/j.isatra.2021.03.013 · Cited by 254
Li, S., Liu, G., Tang, X., Lu, J., & Hu, J. (2017) · Sensors · doi:10.3390/s17081729 · Cited by 211
Deep learning for infrared thermal image based machine health monitoring
Janssens, O., Van de Walle, R., Loccufier, M., & Van Hoecke, S. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2017.2722479 · Cited by 207
Adversarial Multiple-Target Domain Adaptation for Fault Classification
Ragab, M., Chen, Z., Wu, M., Li, H., Kwoh, C.-K., Yan, R., & Li, X. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3009341 · Cited by 90
Peng, T., Shen, C., Sun, S., & Wang, D. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3111567 · Cited by 76
Random sketch learning for deep neural networks in edge computing
Li, B., Chen, P., Liu, H., Guo, W., Cao, X., Du, J., Zhao, C., & Zhang, J. (2021) · Nature Computational Science · doi:10.1038/s43588-021-00039-6 · Cited by 40
Metadata
- Authors
- Smith, W. A., & Randall, R. B.
- Venue
- Mechanical Systems and Signal Processing
- Publisher
- Elsevier BV
- Published
- 2015-12
- Volume
- 64-65
- Pages
- 100-131
- ISSN
- 0888-3270 (ISSN-L)
- OpenAlex
- W243674440
- Cited by
- 2,719
- References
- 7
- FWCI
- 47.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.