A 3D damage model for trabecular bone based on fabric tensors
Open accessThe DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
Abstract
Motivated by the role of damage in normal and pathological conditions of trabecular bone, a novel 3D constitutive law was developed that describes anisotropic elasticity and the rate-independent degradation in mechanical properties resulting from the growth of cracks or voids in the trabecular tissue. The theoretical model was formulated within the framework of continuum damage mechanics and based on two fabric tensors characterizing the local trabecular morphology. Experimental validation of the model was achieved by uniaxial and torsional testing of waisted bovine trabecular bone specimens. Strong correlations were found between cumulated permanent strain, reduction in elastic moduli and nonlinear postyield stress, which support the hypothesis that these variables reflect the same underlying damage process.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Multiaxial loading can lead to more severe reductions in stiffness (27) and fatigue life (28) as compared to uniaxial loading.”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [27]
Citations
Cites
Suresh, S. (1998) · Cambridge University Press eBooks · doi:10.1017/cbo9780511806575 · Cited by 4,526
A plastic-damage model for concrete
Lubliner, J., Oliver, J., Oller, S., & Oñate, E. (1989) · International Journal of Solids and Structures · doi:10.1016/0020-7683(89)90050-4 · Cited by 4,396
The compressive behavior of bone as a two-phase porous structure
Carter, D., & Hayes, W. (1977) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197759070-00021 · Cited by 2,001
New approaches for interpreting projected bone densitometry data
Professor Carter, D. R., Bouxsein, M. L., & Marcus, R. (1992) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.5650070204 · Cited by 1,065
Continuum Damage Mechanics: Part I—General Concepts
Chaboche, J. L. (1988) · Journal of Applied Mechanics · doi:10.1115/1.3173661 · Cited by 1,031
Mécanique des matériaux solides
Lemaitre, J., & Chaboche, J. (1996) · CERN Document Server (European Organization for Nuclear Research) · Cited by 985
The mechanical behaviour of cancellous bone
Gibson, L. J. (1985) · Journal of Biomechanics · doi:10.1016/0021-9290(85)90287-8 · Cited by 932
The Mechanical Adaptations of Bones
Currey, J. D. (1984) · Princeton University Press eBooks · doi:10.1515/9781400853724 · Cited by 896
Distribution of directional data and fabric tensors
Ken-Ichi, K. (1984) · International Journal of Engineering Science · doi:10.1016/0020-7225(84)90090-9 · Cited by 663
Coupled elasto-plasticity and damage constitutive equations
Lemaitre, J. (1985) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(85)90026-x · Cited by 614
Research works printed but not linked: 3
- Choi, 1994, Failure mechanisms of compact bone in bending: A microstructural analysis, Trans. 40th Orthop. Res. Soc., 425
- Nguyen, 1974, Sur les matériaux élastoplastiques à écrousissage positif ou négatif, J. Mécanique, 13, 321
- Zysset, 1995, An alternative model for anisotropic elasticity of trabecular bone, Trans. Summer ASME, 359
Cited by
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
Bone Mechanical Properties in Healthy and Diseased States
Morgan, E. F., Unnikrisnan, G. U., & Hussein, A. I. (2018) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-062117-121139 · Cited by 1,026
“Multiaxial loading can lead to more severe reductions in stiffness (27) and fatigue life (28) as compared to uniaxial loading.”
Biomechanics of Trabecular Bone
Keaveny, T. M., Morgan, E. F., Niebur, G. L., & Yeh, O. C. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.307 · Cited by 801
Biomechanics and Mechanobiology of Trabecular Bone: A Review
Oftadeh, R., Perez-Viloria, M., Villa-Camacho, J. C., Vaziri, A., & Nazarian, A. (2015) · Journal of Biomechanical Engineering · doi:10.1115/1.4029176 · Cited by 547
An Application of Nanoindentation Technique to Measure Bone Tissue Lamellae Properties
Hoffler, C. E., Guo, X. E., Zysset, P. K., & Goldstein, S. A. (2005) · Journal of Biomechanical Engineering · doi:10.1115/1.2073671 · Cited by 222
Self-citation
Metadata
- Authors
- Zysset, P. K., & Curnier, A.
- Affiliations
- École Polytechnique Fédérale de Lausanne (CH)
- Corresponding author
- Zysset, P.K.
- ORCID
- Zysset, P.K.
- Venue
- Journal of Biomechanics
- Publisher
- Elsevier BV
- Published
- 1996-12
- Volume
- 29
- Issue
- 12
- Pages
- 1549-1558
- ISSN
- 0021-9290 (ISSN-L)
- OpenAlex
- W2096542312
- Cited by
- 117
- References
- 55
- Citations by year
- 2026: 4 · 2025: 3 · 2024: 1 · 2023: 5 · 2022: 3 · 2021: 7 · 2020: 4 · 2019: 5 · 2018: 5 · 2017: 3 · 2016: 3 · 2015: 7 · 2014: 11 · 2013: 6 · 2012: 7
- FWCI
- 3.31
- Type
- journal article
- Language
- en
- Open access
- green
- infoscience.epfl.ch
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Journal of Biomechanics (publishedVersion)
- PubMed (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Topics
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone health and osteoporosis research
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone fractures and treatments
- Keywords
- trabecular bone, fabric tensor, continuum damage mechanics, elastic anisotropy, crack propagation, void growth, trabecular morphology, torsion testing, uniaxial testing, elastic modulus reduction
- MeSH terms
- Animals, Bone and Bones, Cattle, Elasticity, Models, Biological, Rotation, Stress, Mechanical, Reproducibility of Results, Bone Density, Fractures, Stress
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A 3D damage model for trabecular bone based on fabric tensors. https://app.cochat.ai/papers/10.1016/s0021-9290(96)80006-6
- The paper
- Zysset, P. K., & Curnier, A. (1996). A 3D damage model for trabecular bone based on fabric tensors. Journal of Biomechanics. https://doi.org/10.1016/s0021-9290(96)80006-6
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.