The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Development and in vitro characterisation of novel bioresorbable and bioactive composite materials based on polylactide foams and Bioglass® for tissue engineering applications
Open accessAbstract
Bioactive and bioresorbable composite materials were fabricated using macroporous poly(DL-lactide) (PDLLA) foams coated with and impregnated by bioactive glass (Bioglass) particles. Stable and homogeneous Bioglass coatings on the surface of PDLLA foams as well as infiltration of Bioglass particles throughout the porous network were achieved using a slurry-dipping technique in conjunction with pre-treatment of the foams in ethanol. The quality of the bioactive glass coatings was reproducible in terms of thickness and microstructure. Additionally, electrophoretic deposition was investigated as an alternative method for the fabrication of PDLLA foam/Bioglass composite materials. In vitro studies in simulated body fluid (SBF) were performed to study the formation of hydroxyapatite (HA) on the surface of PDLLA/Bioglass composites. SEM analysis showed that the HA layer thickness rapidly increased with increasing time in SBF. The high bioactivity of the PDLLA foam/Bioglass composites indicates the potential of the materials for use as bioactive, resorbable scaffolds in bone tissue engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Bonding mechanisms at the interface of ceramic prosthetic materials
Hench, L. L., Splinter, R. J., Allen, W. C., & Greenlee, T. K. (1971) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820050611 · Cited by 3,251
Self-citationHench, L. L. (1998) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1998.tb02540.x · Cited by 2,652
Self-citationPrinciples of Tissue Engineering
(2014) · Elsevier eBooks · doi:10.1016/c2011-0-07193-4 · Cited by 1,906
Biodegradable polymeric scaffolds for musculoskeletal tissue engineering
Agrawal, C. M., & Ray, R. B. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<141::aid-jbm1000>3.0.co;2-j · Cited by 1,052
Late degradation tissue response to poly(?-lactide) bone plates and screws
Bergsma, J. (1995) · Biomaterials · doi:10.1016/0142-9612(95)91092-d · Cited by 799
Toxicology and biocompatibility of bioglasses
Wilson, J., Pigott, G. H., Schoen, F. J., & Hench, L. L. (1981) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820150605 · Cited by 468
Self-citationMa, P. X., Zhang, R., Xiao, G., & Franceschi, R. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200102)54:2<284::aid-jbm16>3.0.co;2-w · Cited by 429
Zhang, Y., & Zhang, M. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20010605)55:3<304::aid-jbm1018>3.0.co;2-j · Cited by 425
Hydroxyapatite fiber reinforced poly(α-hydroxy ester) foams for bone regeneration
Thomson, R. C., Yaszemski, M. J., Powers, J. M., & Mikos, A. G. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00097-0 · Cited by 409
Cited by
Polymeric Scaffolds in Tissue Engineering Application: A Review
Dhandayuthapani, B., Yoshida, Y., Maekawa, T., & Kumar, D. S. (2011) · International Journal of Polymer Science · doi:10.1155/2011/290602 · Cited by 1,773
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
Electrophoretic deposition of biomaterials
Boccaccini, A. R., Keim, S., Ma, R., Li, Y., & Zhitomirsky, I. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2010.0156.focus · Cited by 760
Self-citationElectrophoretic deposition: From traditional ceramics to nanotechnology
Corni, I., Ryan, M. P., & Boccaccini, A. R. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2007.12.011 · Cited by 731
Self-citationPaital, S. R., & Dahotre, N. B. (2009) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2009.05.001 · Cited by 673
Metadata
- Authors
- Roether, J. A., Boccaccini, A. R., Hench, L. L., Maquet, V, Gautier, S., & Jérôme, R.
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2002-09
- Volume
- 23
- Issue
- 18
- Pages
- 3871-3878
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W2141402859
- Cited by
- 358
- References
- 27
- FWCI
- 11.79
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Development and in vitro characterisation of novel bioresorbable and bioactive composite materials based on polylactide foams and Bioglass® for tissue engineering applications. https://app.cochat.ai/papers/10.1016/s0142-9612(02)00131-x
- The paper
- Roether, J. A., Boccaccini, A. R., Hench, L. L., Maquet, V, Gautier, S., & Jérôme, R. (2002). Development and in vitro characterisation of novel bioresorbable and bioactive composite materials based on polylactide foams and Bioglass® for tissue engineering applications. Biomaterials. https://doi.org/10.1016/s0142-9612(02)00131-x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.