The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Quantitative computed tomography estimates of the mechanical properties of human vertebral trabecular bone
Open accessAbstract
The objective of this study was to report our quantitative computed tomography (QCT) density‐mechanical property regressions for trabecular bone for use in biomechanical modelling of the human spine. Cylindrical specimens of human vertebral trabecular bone (from T10 to L4) were cored from 32 cadavers (mean ± SD age = 70.1 ± 16.8; 13 females, 19 males) and scanned using QCT. Mechanical tests were conducted using a protocol that minimized end‐artifacts over the apparent density range tested (0.09–0.38 g/ cm 3). To account for the presence of multiple specimens per donor in this data set, donor was treated as a random effect in the regression model. Mean modulus (319 ± 189 MPa) was higher and mean yield strain (0.78 ± 0.06%) was lower than typical values reported previously due to minimization of the end‐artifact errors. QCT density showed a strong positive correlation with modulus (n = 76) and yield stress (r2 = 0.90–0.95, n = 53, p < 0.001). There was a weak positive linear correlation with yield strain (r2 = 0.58, n = 53, p = 0.07). Prediction errors, incurred when estimating modulus or strength for specimens from a new donor, were 30–36% of the mean values of these properties. Direct QCT density‐mechanical property regressions gave more precise predictions of mechanical properties than if physically measured wet apparent density was used as an intermediate variable to predict mechanical properties from QCT density. Use of these QCT density‐mechanical property regressions should improve the fidelity of QCT‐based biomechanical models of the human spine for whole bone and bone‐implant analyses. © 2002 Orthopaedic Research Society. Published by Elsevier Science Ltd. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction to the Bootstrap
Efron, B., & Tibshirani, R. J. (1994) · doi:10.1201/9780429246593 · Cited by 40,500
An Introduction to the Bootstrap
Efron, B., & Tibshirani, R. J. (1993) · doi:10.1007/978-1-4899-4541-9 · Cited by 21,230
Dependence of yield strain of human trabecular bone on anatomic site
Morgan, E. F., & Keaveny, T. M. (2001) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00011-2 · Cited by 705
Self-citationPrediction of femoral fracture load using automated finite element modeling
Keyak, J. H., Rossi, S. A., Jones, K. A., & Skinner, H. B. (1997) · Journal of Biomechanics · doi:10.1016/s0021-9290(97)00123-1 · Cited by 682
Predicting the compressive mechanical behavior of bone
Keller, T. S. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90056-6 · Cited by 667
Yield strain behavior of trabecular bone
Kopperdahl, D. L., & Keaveny, T. M. (1998) · Journal of Biomechanics · doi:10.1016/s0021-9290(98)00057-8 · Cited by 653
Self-citationMosekilde, L., Mosekilde, L., & Danielsen, C. C. (1987) · Bone · doi:10.1016/8756-3282(87)90074-3 · Cited by 492
Effects of Bone Cement Volume and Distribution on Vertebral Stiffness After Vertebroplasty
Liebschner, M. A. K., Rosenberg, W. S., & Keaveny, T. M. (2001) · Spine · doi:10.1097/00007632-200107150-00009 · Cited by 470
Self-citationFemoral strength is better predicted by finite element models than QCT and DXA
Cody, D. D., Gross, G. J., J. Hou, F., Spencer, H. J., Goldstein, S. A., & P. Fyhrie, D. (1999) · Journal of Biomechanics · doi:10.1016/s0021-9290(99)00099-8 · Cited by 440
Prediction of vertebral body compressive fracture using quantitative computed tomography.
McBroom, R. J., Hayes, W. C., Edwards, W. T., Goldberg, R. P., & White, A. A. (1985) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-198567080-00010 · Cited by 432
Cited by
Crawford, R. P., Cann, C. E., & Keaveny, T. M. (2003) · Bone · doi:10.1016/s8756-3282(03)00210-2 · Cited by 547
Self-citationSnyder, P. J., Kopperdahl, D. L., Stephens-Shields, A. J., Ellenberg, S. S., Cauley, J. A., Ensrud, K. E., Lewis, C. E., Barrett-Connor, E., Schwartz, A. V., Lee, D. C., et al. (2017) · JAMA Internal Medicine · doi:10.1001/jamainternmed.2016.9539 · Cited by 363
Self-citationCortical and Trabecular Load Sharing in the Human Vertebral Body
Eswaran, S. K., Gupta, A., Adams, M. F., & Keaveny, T. M. (2006) · Journal of Bone and Mineral Research · doi:10.1359/jbmr.2006.21.2.307 · Cited by 307
Self-citationKopperdahl, D. L., Aspelund, T., Hoffmann, P. F., Sigurdsson, S., Siggeirsdottir, K., Harris, T. B., Gudnason, V., & Keaveny, T. M. (2014) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.2069 · Cited by 286
Self-citationKeaveny, T. M., Donley, D. W., Hoffmann, P. F., Mitlak, B. H., Glass, E. V., & San Martin, J. A. (2007) · Journal of Bone and Mineral Research · doi:10.1359/jbmr.061011 · Cited by 258
Self-citation
Metadata
- Authors
- Kopperdahl, D. L., Morgan, E. F., & Keaveny, T. M.
- Venue
- Journal of Orthopaedic Research
- Publisher
- Wiley
- Published
- 2002-07
- Volume
- 20
- Issue
- 4
- Pages
- 801-805
- ISSN
- 0736-0266 (ISSN-L)
- 1554-527X
- OpenAlex
- W2029097920
- Cited by
- 267
- References
- 25
- FWCI
- 2.48
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Quantitative computed tomography estimates of the mechanical properties of human vertebral trabecular bone. https://app.cochat.ai/papers/10.1016/s0736-0266(01)00185-1
- The paper
- Kopperdahl, D. L., Morgan, E. F., & Keaveny, T. M. (2002). Quantitative computed tomography estimates of the mechanical properties of human vertebral trabecular bone. Journal of Orthopaedic Research. https://doi.org/10.1016/s0736-0266(01)00185-1
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.