The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Comparison of in situ and in vitro CT scan-based finite element model predictions of proximal femoral fracture load
Abstract
Hip fracture is a serious and common injury that can lead to permanent disability, pneumonia, pulmonary embolism, and death. Research to help prevent these fractures is essential. Computed tomographic (CT) scan-based finite element (FE) modeling is a tool that can predict proximal femoral fracture loads in vitro. Because this tool might be used in vivo, this study examined whether FE models generated from CT scans in situ and in vitro yield comparable predictions of proximal femoral fracture load. CT scans of the left proximal femur of two human cadavers were obtained in situ and in vitro, and three-dimensional FE models employing nonlinear mechanical properties were generated from each CT scan. The models were evaluated under single-limb stance-type loading by applying displacements incrementally to the femoral head. The FE-predicted fracture load (F(FE)) was the maximum femoral head reaction force. F(FE) for the in situ-derived models for the two subjects were 5.2 and 13.3% greater than for the in vitro-derived models. These results demonstrate that using CT scan data obtained in situ instead of in vitro to generate FE models can lead to substantially different predicted fracture loads. This effect must be considered when using this technology in vivo.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hip fractures in the elderly: A world-wide projection
Cooper, C., Campion, G., & Melton, L. J. (1992) · Osteoporosis International · doi:10.1007/bf01623184 · Cited by 3,213
Shigley, J. E. (2001) · CERN Document Server (European Organization for Nuclear Research) · Cited by 2,157
Prediction of femoral fracture load using automated finite element modeling
Keyak, J. H., Rossi, S. A., Jones, K. A., & Skinner, H. B. (1997) · Journal of Biomechanics · doi:10.1016/s0021-9290(97)00123-1 · Cited by 682
Self-citationPredicting the compressive mechanical behavior of bone
Keller, T. S. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90056-6 · Cited by 667
Reddy, T. Y. (1985) · Journal of Mechanical Working Technology · doi:10.1016/0378-3804(85)90010-5 · Cited by 663
Elastic And Inelastic Stress Analysis
Shames, I. H. (1997) · CRC Press eBooks · doi:10.1201/b16599 · Cited by 390
Automated three-dimensional finite element modelling of bone: a new method
Keyak, J. H., Meagher, J. M., Skinner, H. B., & Mote, C. D. (1990) · Journal of Biomedical Engineering · doi:10.1016/0141-5425(90)90022-f · Cited by 383
Self-citationLotz, J. C., Cheal, E. J., & Hayes, W. C. (1995) · Osteoporosis International · doi:10.1007/bf01774015 · Cited by 314
Improved prediction of proximal femoral fracture load using nonlinear finite element models
Keyak, J. H. (2001) · Medical Engineering & Physics · doi:10.1016/s1350-4533(01)00045-5 · Cited by 314
Self-citationFracture Prediction for the Proximal Femur Using Finite Element Models: Part I—Linear Analysis
Lotz, J. C., Cheal, E. J., & Hayes, W. C. (1991) · Journal of Biomechanical Engineering · doi:10.1115/1.2895412 · Cited by 309
Cited by
Prediction of strength and strain of the proximal femur by a CT-based finite element method
Bessho, M., Ohnishi, I., Matsuyama, J., Matsumoto, T., Imai, K., & Nakamura, K. (2007) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2006.08.003 · Cited by 407
The role of cortical bone and its microstructure in bone strength
Augat, P., & Schorlemmer, S. (2006) · Age and Ageing · doi:10.1093/ageing/afl081 · Cited by 377
Schillinger, D., & Ruess, M. (2015) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-014-9115-y · Cited by 340
Predicting Proximal Femoral Strength Using Structural Engineering Models
Keyak, J. H., Kaneko, T. S., Tehranzadeh, J., & Skinner, H. B. (2005) · Clinical Orthopaedics and Related Research · doi:10.1097/01.blo.0000164400.37905.22 · Cited by 278
Self-citationSansalone, V., Naili, S., Bousson, V., Bergot, C., Peyrin, F., Zarka, J., Laredo, J. D., & Haïat, G. (2010) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2010.03.034 · Cited by 109
Metadata
- Authors
- Keyak, J. H., & Falkinstein, Y.
- Venue
- Medical Engineering & Physics
- Publisher
- IOP Publishing
- Published
- 2003-09-23
- Volume
- 25
- Issue
- 9
- Pages
- 781-787
- ISSN
- 1350-4533 (ISSN-L)
- 1873-4030
- OpenAlex
- W2033471400
- Cited by
- 259
- References
- 22
- FWCI
- 3.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comparison of in situ and in vitro CT scan-based finite element model predictions of proximal femoral fracture load. https://app.cochat.ai/papers/10.1016/s1350-4533(03)00081-x
- The paper
- Keyak, J. H., & Falkinstein, Y. (2003). Comparison of in situ and in vitro CT scan-based finite element model predictions of proximal femoral fracture load. Medical Engineering & Physics. https://doi.org/10.1016/s1350-4533(03)00081-x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.