The DOI matches its Crossref record.
CO2 capture by adsorption: Materials and process development
Open accessAbstract
Abstract Vacuum swing adsorptive (VSA) capture of CO 2 from flue gas and related process streams is a promising technology for greenhouse gas mitigation. Although early reports suggested that VSA was problematic and expensive, through the application of more logical process configurations that are appropriately coupled to the composition of the feed and product gas streams, we can now refute this early assertion. Improved cycle designs coupled with tighter temperature control are also helping to optimise performance for CO 2 separation. Simultaneously, new adsorbent materials are being developed. These separate CO 2 by selective (acid-base) reaction with surface bound amine groups (chemisorption), rather than on the basis of non-bonding interactions (physisorption). This report describes some of these recent developments from our own laboratories and points to synergies that are anticipated as a result of combining these improvements in adsorbent properties and VSA process cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
CO2 capture and separation technologies for end-of-pipe applications – A review
Olajire, A. A. (2010) · Energy · doi:10.1016/j.energy.2010.02.030 · Cited by 1,217
Biogas as a renewable energy fuel – A review of biogas upgrading, utilisation and storage
Ullah Khan, I., Hafiz Dzarfan Othman, M., Hashim, H., Matsuura, T., Ismail, A. F., Rezaei-DashtArzhandi, M., & Wan Azelee, I. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.035 · Cited by 775
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
CO2 capture adsorbents functionalized by amine – bearing polymers: A review
Varghese, A. M., & Karanikolos, G. N. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2020.103005 · Cited by 363
Valorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313
A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption
Shafeeyan, M. S., Wan Daud, W. M. A., & Shamiri, A. (2014) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.08.018 · Cited by 293
Advances in Pressure Swing Adsorption for Gas Separation
Grande, C. A. (2012) · ISRN Chemical Engineering · doi:10.5402/2012/982934 · Cited by 285
Sorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Carbon Dioxide and Nitrogen Adsorption on Cation-Exchanged SSZ-13 Zeolites
Pham, T. D., Liu, Q., & Lobo, R. F. (2013) · Langmuir · doi:10.1021/la304138z · Cited by 186
Ben-Mansour, R., & Qasem, N. A. A. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.010 · Cited by 139
Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads
Shen, C., Liu, Z., Li, P., & Yu, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202097y · Cited by 138
Cycle Development and Design for CO 2 Capture from Flue Gas by Vacuum Swing Adsorption
Zhang, J., & Webley, P. A. (2008) · Environmental Science & Technology · doi:10.1021/es0706854 · Cited by 132
Self-citationChatterjee, R., Sajjadi, B., Mattern, D. L., Chen, W.-Y., Zubatiuk, T., Leszczynska, D., Leszczynski, J., Egiebor, N. O., & Hammer, N. (2018) · Fuel · doi:10.1016/j.fuel.2018.03.145 · Cited by 125
Gao, F., Li, Y., Bian, Z., Hu, J., & Liu, H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06645f · Cited by 113
Effects of water vapour on CO2 capture with vacuum swing adsorption using activated carbon
Xu, D., Xiao, P., Zhang, J., Li, G., Xiao, G., Webley, P. A., & Zhai, Y. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.080 · Cited by 112
Self-citationControlling the Adsorption Enthalpy of CO2 in Zeolites by Framework Topology and Composition
Grajciar, L., Čejka, J., Zukal, A., Otero Areán, C., Turnes Palomino, G., & Nachtigall, P. (2012) · ChemSusChem · doi:10.1002/cssc.201200270 · Cited by 112
Impact of alkalinity sources on the life-cycle energy efficiency of mineral carbonation technologies
Kirchofer, A., Brandt, A., Krevor, S., Prigiobbe, V., & Wilcox, J. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22180b · Cited by 81
Bahamon, D., Ogungbenro, A. E., Khaleel, M., Abu-Zahra, M. R. M., & Vega, L. F. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05542 · Cited by 31
Metadata
- Authors
- Chaffee, A. L., Knowles, G. P., Liang, Z., Zhang, J., Xiao, P., & Webley, P. A.
- Venue
- International Journal of Greenhouse Gas Control
- Publisher
- Elsevier BV
- Published
- 2007-04
- Volume
- 1
- Issue
- 1
- Pages
- 11-18
- ISSN
- 1750-5836 (ISSN-L)
- OpenAlex
- W2045995555
- Cited by
- 416
- References
- 0
- FWCI
- 39.90
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
