Constitutive relationships of fabric, density, and elastic properties in cancellous bone architecture
The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Abstract
The hypothesis that trabecular morphology can predict the elastic properties of cancellous bone has only partly been verified and no predictive analytical model is currently available. Such models are becoming increasingly relevant as the resolution levels of three-dimensional scanning techniques approach the size of trabeculae. This study took advantage of micro-finite-element methods and tested the aforementioned hypothesis in normal cancellous bone material collected at six anatomical locations from 56 individuals. Numerical analysis was based on high-resolution three-dimensional computer reconstructions of cancellous bone specimens from which the complete elastic characteristics and trabecular morphology, represented by three different fabric measures (the mean intercept length and two volume-based ones), were calculated. Each fabric measure was analyzed individually using the tensorial relationships derived by Cowin (Mech Mater 4:137-147; 1985). Models for both stiffness and compliance entries were developed. The models based on stiffness entries could explain 93.4%-95.6% of the variance, whereas those based on compliance entries could explain 89.2%-89.4%. When using the former model, the MIL (mean intercept length measure) performed slightly better than the two volume-based measures, VO (volume orientation) and SVD (star volume distribution), with 23% less remaining variance. The high correlations found strongly support the hypothesis and increase the hope that, on the basis of information on trabecular morphology, it will be possible to obtain considerably better estimates of bone quality in vivo compared with the rough two-dimensional density measurements used today.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“These results confirmed the primary role of both volume fraction and microstructural anisotropy in determining apparent elastic properties.”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [133]
In the citing paper
“For example, Kabel et al. (133) used micro-FE analysis to estimate all nine orthotropic elastic constants of specimens of trabecular bone from multiple anatomic sites and employed these data to determine the values of the coefficients in the fabric–elasticity relationships proposed earlier by Cowin (86).”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [133]
Citations
Cites
Elastic properties of reinforced solids: Some theoretical principles
Hill, R. (1963) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(63)90036-x · Cited by 4,918
The compressive behavior of bone as a two-phase porous structure
Carter, D., & Hayes, W. (1977) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197759070-00021 · Cited by 2,001
(2018) · De Gruyter eBooks · doi:10.1515/9783110542400 · Cited by 1,876
van Rietbergen, B., Weinans, H., Huiskes, R., & Odgaard, A. (1995) · Journal of Biomechanics · doi:10.1016/0021-9290(95)80008-5 · Cited by 865
Self-citationThree-dimensional methods for quantification of cancellous bone architecture
Odgaard, A. (1997) · Bone · doi:10.1016/s8756-3282(97)00007-0 · Cited by 777
Self-citationThe relationship between the structural and orthogonal compressive properties of trabecular bone
Goulet, R. W., Goldstein, S. A., Ciarelli, M. J., Kuhn, J. L., Brown, M. B., & Feldkamp, L. A. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90014-0 · Cited by 741
On the dependence of the elasticity and strength of cancellous bone on apparent density
Rice, J. C., Cowin, S. C., & Bowman, J. A. (1988) · Journal of Biomechanics · doi:10.1016/0021-9290(88)90008-5 · Cited by 734
Characterization of microstructural anisotropy in orthotropic materials using a second rank tensor
Harrigan, T. P., & Mann, R. W. (1984) · Journal of Materials Science · doi:10.1007/bf00540446 · Cited by 603
The quantitative morphology of anisotropic trabecular bone
Whitehouse, W. J. (1974) · Journal of Microscopy · doi:10.1111/j.1365-2818.1974.tb03878.x · Cited by 579
The relationship between the elasticity tensor and the fabric tensor
Cowin, S. C. (1985) · Mechanics of Materials · doi:10.1016/0167-6636(85)90012-2 · Cited by 570
Research works printed but not linked: 2
- Karlsson, L. M. Stereology in Materials Science: Demonstration of Some Methods. Ph.D. thesis, Royal Institute of Technology, Stockholm; 1993.
- Snyder, 1989, Anisotropic structure-property relations for trabecular bone, Trans Orthop Res Soc, 35, 265
Cited by
Trabecular bone modulus–density relationships depend on anatomic site
Morgan, E. F., Bayraktar, H. H., & Keaveny, T. M. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00071-x · Cited by 1,209
Bone Mechanical Properties in Healthy and Diseased States
Morgan, E. F., Unnikrisnan, G. U., & Hussein, A. I. (2018) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-062117-121139 · Cited by 1,026
Biomechanics of Trabecular Bone
Keaveny, T. M., Morgan, E. F., Niebur, G. L., & Yeh, O. C. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.307 · Cited by 801
Mineralized Collagen Fibrils: A Mechanical Model with a Staggered Arrangement of Mineral Particles
Jäger, I., & Fratzl, P. (2000) · Biophysical Journal · doi:10.1016/s0006-3495(00)76426-5 · Cited by 793
Dependence of yield strain of human trabecular bone on anatomic site
Morgan, E. F., & Keaveny, T. M. (2001) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00011-2 · Cited by 705
Metadata
- Authors
- Kabel, J., van Rietbergen, B., Odgaard, A., & Huiskes, R.
- Affiliations
- Aarhus University Hospital (DK)
- Radboud University Nijmegen (NL)
- Corresponding author
- Kabel, J.
- ORCID
- Odgaard, A.
- Venue
- Bone
- Publisher
- Elsevier BV
- Published
- 1999-10
- Volume
- 25
- Issue
- 4
- Pages
- 481-486
- ISSN
- 1873-2763 (ISSN-L)
- 8756-3282
- OpenAlex
- W2125321976
- Cited by
- 206
- References
- 35
- Citations by year
- 2026: 6 · 2025: 1 · 2024: 1 · 2023: 3 · 2022: 2 · 2021: 5 · 2020: 5 · 2019: 5 · 2018: 21 · 2017: 10 · 2016: 7 · 2015: 7 · 2014: 9 · 2013: 8 · 2012: 11
- FWCI
- 9.76
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Bone (publishedVersion)
- PubMed (publishedVersion)
- TU/e Research Portal (publishedVersion)
- TU/e Research Portal (submittedVersion)
- Radboud Repository (Radboud University) (submittedVersion)
- Topics
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone health and osteoporosis research
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Physical Sciences › Engineering › Mechanics of Materials › Composite Material Mechanics
- Keywords
- trabecular bone, trabecular morphology, fabric tensor, mean intercept length, elastic properties, stiffness, compliance, micro-finite element analysis, bone quality, constitutive equations
- MeSH terms
- Adolescent, Adult, Aged, Aged, 80 and over, Biomechanical Phenomena, Bone and Bones, Computer Simulation, Elasticity, Female, Humans, Male, Middle Aged, Models, Biological, Bone Density
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Constitutive relationships of fabric, density, and elastic properties in cancellous bone architecture. https://app.cochat.ai/papers/10.1016/s8756-3282(99)00190-8
- The paper
- Kabel, J., van Rietbergen, B., Odgaard, A., & Huiskes, R. (1999). Constitutive relationships of fabric, density, and elastic properties in cancellous bone architecture. Bone. https://doi.org/10.1016/s8756-3282(99)00190-8
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.