The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Anthraquinonedisulfonate Electrochemistry: A Comparison of Glassy Carbon, Hydrogenated Glassy Carbon, Highly Oriented Pyrolytic Graphite, and Diamond Electrodes
Abstract
The electrochemistry of anthraquinone-2,6-disulfonate (2,6-AQDS) at glassy carbon (GC), hydrogenated glassy carbon (HGC), the basal plane of highly oriented pyrolytic graphite (HOPG), and boron-doped diamond was investigated by cyclic voltammetry and chronocoulometry. Quantitative determination of the surface coverage and qualitative assessment of the physisorption strength of 2,6-AQDS adsorption on each of these electrodes were done. The diamond and HGC surfaces are nonpolar and relatively oxygen-free, with the surface carbon atoms terminated by hydrogen. The polar 2,6-AQDS does not adsorb on these surfaces, and the electrolysis proceeds by a diffusion-controlled reaction. Conversely, the GC and HOPG surfaces are polar, with the exposed defect sites terminated by carbon-oxygen functionalities. 2,6-AQDS strongly physisorbs on both of these surfaces at near monolayer or greater coverages, such that the electrolysis proceeds through a surface-confined state. Less than 40% of the initial surface coverage can be removed by rinsing and solution replacement, reflective of strong physisorption. The results show the important role of the surface carbon-oxygen functionalities in promoting strong dipole-dipole and ion-dipole interactions with polar and ionic molecules such as 2,6-AQDS. The results also support the theory that diamond electrodes may be less subject to fouling by polar adsorbates, as compared to GC, leading to improved response stability in electroanalytical measurements. The relationship between the 2,6-AQDS surface coverage, the double-layer capacitance, and the heterogeneous electron-transfer rate constant for Fe(CN)(6)(3)(-)(/4)(-) for these four carbon electrodes is presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrogen and Oxygen Evolution on Boron‐Doped Diamond Electrodes
Martin, H. B., Argoitia, A., Landau, U., Anderson, A. B., & Angus, J. C. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836901 · Cited by 430
Differential capacitance study on the basal plane of stress-annealed pyrolytic graphite
Randin, J.-P., & Yeager, E. (1972) · Journal of Electroanalytical Chemistry and Interfacial Electrochemistry · doi:10.1016/s0022-0728(72)80249-3 · Cited by 254
Peer Reviewed: Boron-Doped Diamond Thin-Film Electrodes
Xu, J., Granger, M. C., Chen, Q., Strojek, J. W., Lister, T. E., & Swain, G. M. (1997) · Analytical Chemistry · doi:10.1021/ac971791z · Cited by 240
Self-citationDifferential Capacitance Study of Stress-Annealed Pyrolytic Graphite Electrodes
Randin, J.-P., & Yeager, E. (1971) · Journal of The Electrochemical Society · doi:10.1149/1.2408151 · Cited by 235
Efficient electrochemical reduction of nitrate to ammonia using conductive diamond film electrodes
Tenne, R., Patel, K., Hashimoto, K., & Fujishima, A. (1993) · Journal of Electroanalytical Chemistry · doi:10.1016/0022-0728(93)80105-q · Cited by 171
McDermott, M. T., & McCreery, R. L. (1994) · Langmuir · doi:10.1021/la00023a062 · Cited by 142
The use of CVD diamond thin films in electrochemical systems
Swain, G. M. (1994) · Advanced Materials · doi:10.1002/adma.19940060511 · Cited by 102
Self-citationSoriaga, M. P., & Hubbard, A. T. (1982) · Journal of the American Chemical Society · doi:10.1021/ja00374a009 · Cited by 99
Efficient reduction of nitrite and nitrate to ammonia using thin-film B-doped diamond electrodes
Reuben, C., Galun, E., Cohen, H., Tenne, R., Kalish, R., Muraki, Y., Hashimoto, K., Fujishima, A., Butler, J. E., & Lévy‐Clément, C. (1995) · Journal of Electroanalytical Chemistry · doi:10.1016/0022-0728(95)03961-f · Cited by 98
Electrodeposition of Metal Adlayers on Boron‐Doped Diamond Thin‐Film Electrodes
Awada, M., Strojek, J. W., & Swain, G. M. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048579 · Cited by 75
Self-citation
Cited by
Electrochemical Sensing and Biosensing Platform Based on Chemically Reduced Graphene Oxide
Zhou, M., Zhai, Y., & Dong, S. (2009) · Analytical Chemistry · doi:10.1021/ac900136z · Cited by 1,706
Novel Electrochemical Approach to Assess the Redox Properties of Humic Substances
Aeschbacher, M., Sander, M., & Schwarzenbach, R. P. (2010) · Environmental Science & Technology · doi:10.1021/es902627p · Cited by 635
Rapid electron transfer by the carbon matrix in natural pyrogenic carbon
Sun, T., Levin, B. D. A., Guzman, J. J. L., Enders, A., Muller, D. A., Angenent, L. T., & Lehmann, J. (2017) · Nature Communications · doi:10.1038/ncomms14873 · Cited by 626
A New View of Electrochemistry at Highly Oriented Pyrolytic Graphite
Patel, A. N., Collignon, M. G., O’Connell, M. A., Hung, W. O. Y., McKelvey, K., Macpherson, J. V., & Unwin, P. R. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308615h · Cited by 273
Metadata
- Authors
- Xu, J., Chen, Q., & Swain, G. M.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 1998-06-23
- Volume
- 70
- Issue
- 15
- Pages
- 3146-3154
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2081749592
- Cited by
- 252
- References
- 10
- FWCI
- 9.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Anthraquinonedisulfonate Electrochemistry: A Comparison of Glassy Carbon, Hydrogenated Glassy Carbon, Highly Oriented Pyrolytic Graphite, and Diamond Electrodes. https://app.cochat.ai/papers/10.1021/ac9800661
- The paper
- Xu, J., Chen, Q., & Swain, G. M. (1998). Anthraquinonedisulfonate Electrochemistry: A Comparison of Glassy Carbon, Hydrogenated Glassy Carbon, Highly Oriented Pyrolytic Graphite, and Diamond Electrodes. Analytical Chemistry. https://doi.org/10.1021/ac9800661
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.