The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
MXene as a Charge Storage Host
Abstract
Conspectus The development of efficient electrochemical energy storage (EES) devices is an important sustainability issue to realize green electrical grids. Charge storage mechanisms in present EES devices, such as ion (de)intercalation in lithium-ion batteries and electric double layer formation in capacitors, provide insufficient efficiency and performance for grid use. Intercalation pseudocapacitance (or redox capacitance) has emerged as an alternative chemistry for advanced EES devices. Intercalation pseudocapacitance occurs through bulk redox reactions with ultrafast ion diffusion. In particular, the metal carbide/nitride nanosheets termed MXene discovered in 2011 are a promising class of intercalation pseudocapacitor electrode materials because of their compositional versatility for materials exploration (e.g., Ti 2 CT x, Ti 3 C 2 T x, V 2 CT x, and Nb 2 CT x, where T is a surface termination group such as F, Cl, O, or OH), high electrical conductivity for high current charge, and a layered structure of stacked nanosheets for ultrafast ion intercalation. Various MXene electrodes have been reported to exhibit complementary battery performance, such as large specific capacity at high charge/discharge rates. However, general design strategies of MXenes for EES applications have not been established because of the limited understanding of the electrochemical mechanisms of MXenes. This Account describes current knowledge of the fundamental electrochemical properties of MXenes and attempts to clarify where intercalation capacitance ends and intercalation pseudocapacitance begins. MXene electrodes in aqueous electrolytes exhibit intercalation of hydrated cations. The hydrated cations form an electric double layer in the interlayer space to give a conventional capacitance within the narrow potential window of aqueous electrolytes. When nonaqueous electrolytes are used, although solvated cations are intercalated into the interlayer space during the initial stage of charging, the confined solvation shell should gradually collapse because of the large inner potential difference in the interlayer space. Upon further charging, desolvated ions solely intercalate, and the atomic orbitals of the desolvated cations overlap with the orbitals of MXene to form a donor band. The formation of the donor band induces the reduction of MXene, giving rise to an intercalation pseudocapacitance through charge transfer from the ions to MXene sheets. Differences in the electrochemical reaction mechanisms lead to variation of the electrochemical responses of MXenes (e.g., cyclic voltammetry curves, specific capacitance), highlighting the importance of establishing a comprehensive grasp of the electrochemical reactions of MXenes at an atomic level. Because of their better charge storage kinetics compared with those of typical materials used in present EES devices, aqueous/nonaqueous asymmetric capacitors using titanium carbide MXene electrodes are capable of efficient operation at high charge/discharge rates. Therefore, the further development of novel MXene electrodes for advanced EES applications is warranted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Hu, M., Li, Z., Hu, T., Zhu, S., Zhang, C., & Wang, X. (2016) · ACS Nano · doi:10.1021/acsnano.6b06597 · Cited by 555
RetractedElectrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance
Augustyn, V., Come, J., Lowe, M. A., Kim, J. W., Taberna, P.-L., Tolbert, S. H., Abruña, H. D., Simon, P., & Dunn, B. (2013) · Nature Materials · doi:10.1038/nmat3601 · Cited by 5,177
Two-Dimensional Transition Metal Carbides
Naguib, M., Mashtalir, O., Carle, J., Presser, V., Lu, J., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2012) · ACS Nano · doi:10.1021/nn204153h · Cited by 4,769
Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
Intercalation and delamination of layered carbides and carbonitrides
Mashtalir, O., Naguib, M., Mochalin, V. N., Dall’Agnese, Y., Heon, M., Barsoum, M. W., & Gogotsi, Y. (2013) · Nature Communications · doi:10.1038/ncomms2664 · Cited by 2,852
Cited by
The world of two-dimensional carbides and nitrides (MXenes)
VahidMohammadi, A., Rosen, J., & Gogotsi, Y. (2021) · Science · doi:10.1126/science.abf1581 · Cited by 3,191
Pseudocapacitance: From Fundamental Understanding to High Power Energy Storage Materials
Fleischmann, S., Mitchell, J. B., Wang, R., Zhan, C., Jiang, D.-E., Presser, V., & Augustyn, V. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00170 · Cited by 1,942
Research Development on K-Ion Batteries
Hosaka, T., Kubota, K., Hameed, A. S., & Komaba, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00463 · Cited by 1,346
Electronic and Optical Properties of 2D Transition Metal Carbides and Nitrides (MXenes)
Hantanasirisakul, K., & Gogotsi, Y. (2018) · Advanced Materials · doi:10.1002/adma.201804779 · Cited by 1,325
Jiang, X., Kuklin, A. V., Baev, A., Ge, Y., Ågren, H., Zhang, H., & Prasad, P. N. (2020) · Physics Reports · doi:10.1016/j.physrep.2019.12.006 · Cited by 914
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Emerging 2D MXenes for supercapacitors: status, challenges and prospects
Hu, M., Zhang, H., Hu, T., Fan, B., Wang, X., & Li, Z. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00175a · Cited by 828
Synthesis, structure, properties and applications of MXenes: Current status and perspectives
Ronchi, R. M., Arantes, J. T., & Santos, S. F. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.06.114 · Cited by 698
Influences from solvents on charge storage in titanium carbide MXenes
Wang, X., Mathis, T. S., Li, K., Lin, Z., Vlcek, L., Torita, T., Osti, N. C., Hatter, C., Urbankowski, P., Sarycheva, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0339-9 · Cited by 539
VahidMohammadi, A., Mojtabavi, M., Caffrey, N. M., Wanunu, M., & Beidaghi, M. (2019) · Advanced Materials · doi:10.1002/adma.201806931 · Cited by 401
Rational Design of Flexible Two-Dimensional MXenes with Multiple Functionalities
Fu, Z., Wang, N., Legut, D., Si, C., Zhang, Q., Du, S., Germann, T. C., Francisco, J. S., & Zhang, R. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00348 · Cited by 396
Interface Chemistry on MXene‐Based Materials for Enhanced Energy Storage and Conversion Performance
Hui, X., Ge, X., Zhao, R., Li, Z., & Yin, L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005190 · Cited by 385
MXene‐Based Composites: Synthesis and Applications in Rechargeable Batteries and Supercapacitors
Yang, J., Bao, W., Jaumaux, P., Zhang, S., Wang, C., & Wang, G. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201802004 · Cited by 331
Zhu, Q., Li, J., Simon, P., & Xu, B. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.035 · Cited by 318
Two‐dimensional MXenes for lithium‐sulfur batteries
Zhang, C. (., Cui, L., Abdolhosseinzadeh, S., & Heier, J. (2020) · InfoMat · doi:10.1002/inf2.12080 · Cited by 308
MXene/Polymer Nanocomposites: Preparation, Properties, and Applications
Chen, X., Zhao, Y., Li, L., Wang, Y., Wang, J., Xiong, J., Du, S., Zhang, P., Shi, X., & Yu, J. (2021) · Polymer Reviews · doi:10.1080/15583724.2020.1729179 · Cited by 279
Hetero‐MXenes: Theory, Synthesis, and Emerging Applications
Gao, L., Bao, W., Kuklin, A. V., Mei, S., Zhang, H., & Ågren, H. (2021) · Advanced Materials · doi:10.1002/adma.202004129 · Cited by 278
Jang, Y., Kim, S. M., Spinks, G. M., & Kim, S. J. (2020) · Advanced Materials · doi:10.1002/adma.201902670 · Cited by 274
Layer-by-layer self-assembly of pillared two-dimensional multilayers
Tian, W., VahidMohammadi, A., Wang, Z., Ouyang, L., Beidaghi, M., & Hamedi, M. M. (2019) · Nature Communications · doi:10.1038/s41467-019-10631-0 · Cited by 258
Metadata
- Authors
- Okubo, M., Sugahara, A., Kajiyama, S., & Yamada, A.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-02-22
- Volume
- 51
- Issue
- 3
- Pages
- 591-599
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2789168916
- Cited by
- 469
- References
- 48
- FWCI
- 15.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.