The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Emerging Design and Characterization Guidelines for Polymer-Based Infrared Photodetectors
Abstract
Conspectus Infrared photodetectors are essential to many applications, including surveillance, communications, process monitoring, and biological imaging. The short-wave infrared (SWIR) spectral region (λ = 1–3 μm) is particularly powerful for health monitoring and medical diagnostics because biological tissues show low absorbance and minimal SWIR autofluorescence, enabling greater penetration depth and improved resolution in comparison with visible light. However, current SWIR photodetection technologies are largely based on epitaxially grown inorganic semiconductors, which are costly, require complex processing, and impose cooling requirements incompatible with wearable electronics. Solution-processable semiconductors are being developed for infrared detectors to enable low-cost direct deposition and facilitate monolithic integration and resolution not achievable using current technologies. In particular, organic semiconductors offer numerous advantages, including large-area and conformal coverage, temperature insensitivity, and biocompatibility, for enabling ubiquitous SWIR optoelectronics. This Account introduces recent efforts to advance the spectral response of organic photodetectors into the SWIR. High-performance visible to near-infrared (NIR) organic photodetectors have been demonstrated by leveraging the wealth of knowledge from organic solar cell research in the past decade. On the other hand, organic semiconductors that absorb in the SWIR are just emerging, and only a few organic materials have been reported that exhibit photocurrent past 1 μm. In this Account, we survey novel SWIR molecules and polymers and discuss the main bottlenecks associated with charge recombination and trapping, which are more challenging to address in narrow-band-gap photodetectors in comparison with devices operating in the visible to NIR. As we call attention to discrepancies in the literature regarding performance metrics, we share our perspective on potential pitfalls that may lead to overestimated values, with particular attention to the detectivity (signal-to-noise ratio) and temporal characteristics, in order to ensure a fair comparison of device performance. As progress is made toward overcoming challenges associated with losses due to recombination and increasing noise at progressively narrower band gaps, the performance of organic SWIR photodetectors is steadily rising, with detectivity exceeding 10 11 Jones, comparable to that of commercial germanium photodiodes. Organic SWIR photodetectors can be incorporated into wearable physiological monitors and SWIR spectroscopic imagers that enable compositional analysis. A wide range of potential applications include food and water quality monitoring, medical and biological studies, industrial process inspection, and environmental surveillance. There are exciting opportunities for low-cost organic SWIR technologies to be as widely deployable and affordable as today’s ubiquitous cell phone cameras operating in the visible, which will serve as an empowering tool for users to discover information in the SWIR and inspire new use cases and applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wilson, R. H., Nadeau, K. P., Jaworski, F. B., Tromberg, B. J., & Durkin, A. J. (2015) · Journal of Biomedical Optics · doi:10.1117/1.jbo.20.3.030901 · Cited by 415
Fang, H., Yu, K. J., Gloschat, C., Yang, Z., Song, E., Chiang, C.-H., Zhao, J., Won, S. M., Xu, S., Trumpis, M., et al. (2017) · Nature Biomedical Engineering · doi:10.1038/s41551-017-0038 · Cited by 278
Wearable Organic Optoelectronic Sensors for Medicine
Bansal, A. K., Hou, S., Kulyk, O., Bowman, E. M., & Samuel, I. D. W. (2015) · Advanced Materials · doi:10.1002/adma.201403560 · Cited by 205
Allen, J., & Murray, A. (2003) · Physiological Measurement · doi:10.1088/0967-3334/24/2/306 · Cited by 202
Cited by
Recent Progress in Organic Photodetectors and their Applications
Ren, H., Chen, J., Li, Y., & Tang, J. (2021) · Advanced Science · doi:10.1002/advs.202002418 · Cited by 536
Wang, C., Zhang, X., & Hu, W. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00431a · Cited by 428
High‐Performance, Room Temperature, Ultra‐Broadband Photodetectors Based on Air‐Stable PdSe2
Liang, Q., Wang, Q., Zhang, Q., Wei, J., Lim, S. X., Zhu, R., Hu, J., Wei, W., Lee, C., Sow, C., et al. (2019) · Advanced Materials · doi:10.1002/adma.201807609 · Cited by 351
Exploration of Near-Infrared Organic Photodetectors
Li, Q., Guo, Y., & Liu, Y. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b00966 · Cited by 328
Carbon dots as a new class of nanomedicines: Opportunities and challenges
Wang, B., Song, H., Qu, X., Chang, J., Yang, B., & Lu, S. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2021.214010 · Cited by 305
Metadata
- Authors
- Wu, Z., Zhai, Y., Kim, H., Azoulay, J. D., & Ng, T. N.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-12-06
- Volume
- 51
- Issue
- 12
- Pages
- 3144-3153
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2904359042
- Cited by
- 227
- References
- 4
- FWCI
- 6.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Emerging Design and Characterization Guidelines for Polymer-Based Infrared Photodetectors. https://app.cochat.ai/papers/10.1021/acs.accounts.8b00446
- The paper
- Wu, Z., Zhai, Y., Kim, H., Azoulay, J. D., & Ng, T. N. (2018). Emerging Design and Characterization Guidelines for Polymer-Based Infrared Photodetectors. Accounts of Chemical Research. https://doi.org/10.1021/acs.accounts.8b00446
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.