The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis
Abstract
Additive manufacturing provides a unique tool for prototyping structures toward electrochemical sensing, due to its ability to produce highly versatile, tailored-shaped devices in a low-cost and fast way with minimized waste. Here we present 3D-printed graphene electrodes for electrochemical sensing. Ring- and disc-shaped electrodes were 3D-printed with a Fused Deposition Modeling printer and characterized using cyclic voltammetry and scanning electron microscopy. Different redox probes K 3 Fe(CN) 6:K 4 Fe(CN) 6, FeCl 3, ascorbic acid, Ru(NH 3 ) 6 Cl 3, and ferrocene monocarboxylic acid) were used to assess the electrochemical performance of these devices. Finally, the electrochemical detection of picric acid and ascorbic acid was carried out as proof-of-concept analytes for sensing applications. Such customizable platforms represent promising alternatives to conventional electrodes for a wide range of sensing applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
Self-citation3d printing technologies applied for food design: Status and prospects
Godoi, F. C., Prakash, S., & Bhandari, B. R. (2016) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2016.01.025 · Cited by 939
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Integrated 3D-printed reactionware for chemical synthesis and analysis
Symes, M. D., Kitson, P. J., Yan, J., Richmond, C. J., Cooper, G. J. T., Bowman, R. W., Vilbrandt, T., & Cronin, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1313 · Cited by 617
3D Printed Graphene Based Energy Storage Devices
Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E. (2017) · Scientific Reports · doi:10.1038/srep42233 · Cited by 471
Additive manufacturing for the food industry
Lipton, J. I., Cutler, M., Nigl, F., Cohen, D., & Lipson, H. (2015) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2015.02.004 · Cited by 459
Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
Byambaa, B., Annabi, N., Yue, K., Trujillo‐de Santiago, G., Alvarez, M. M., Jia, W., Kazemzadeh‐Narbat, M., Shin, S. R., Tamayol, A., & Khademhosseini, A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700015 · Cited by 394
Interplay between materials and microfluidics
Hou, X., Zhang, Y. S., Santiago, G. T.-D., Alvarez, M. M., Ribas, J., Jonas, S. J., Weiss, P. S., Andrews, A. M., Aizenberg, J., & Khademhosseini, A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.16 · Cited by 387
The Boom in 3D-Printed Sensor Technology
Xu, Y., Wu, X., Guo, X., Kong, B., Zhang, M., Qian, X., Mi, S., & Sun, W. (2017) · Sensors · doi:10.3390/s17051166 · Cited by 361
Electrochemistry, biosensors and microfluidics: a convergence of fields
Rackus, D. G., Shamsi, M. H., & Wheeler, A. R. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00369a · Cited by 354
Benck, J. D., Pinaud, B. A., Gorlin, Y., & Jaramillo, T. F. (2014) · PLoS ONE · doi:10.1371/journal.pone.0107942 · Cited by 289
Kyobula, M., Adedeji, A., Alexander, M. R., Saleh, E., Wildman, R., Ashcroft, I., Gellert, P. R., & Roberts, C. J. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.06.025 · Cited by 288
3D printed microfluidic devices with integrated versatile and reusable electrodes
Erkal, J. L., Selimovic, A., Gross, B. C., Lockwood, S. Y., Walton, E. L., McNamara, S., Martin, R. S., & Spence, D. M. (2014) · Lab Chip · doi:10.1039/c4lc00171k · Cited by 287
3D printing complex chocolate objects: Platform design, optimization and evaluation
Lanaro, M., Forrestal, D. P., Scheurer, S., Slinger, D. J., Liao, S., Powell, S. K., & Woodruff, M. A. (2017) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.06.029 · Cited by 239
3D printed microfluidic circuitry via multijet-based additive manufacturing
Sochol, R. D., Sweet, E., Glick, C. C., Venkatesh, S., Avetisyan, A., Ekman, K. F., Raulinaitis, A., Tsai, A., Wienkers, A., Korner, K., et al. (2016) · Lab on a Chip · doi:10.1039/c5lc01389e · Cited by 237
Gu, Q., Tomaskovic‐Crook, E., Wallace, G. G., & Crook, J. M. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700175 · Cited by 228
Helical 3D‐Printed Metal Electrodes as Custom‐Shaped 3D Platform for Electrochemical Devices
Ambrosi, A., Moo, J. G. S., & Pumera, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503902 · Cited by 214
Self-citationThree dimensional (3D) printed electrodes for interdigitated supercapacitors
Zhao, C., Wang, C., Gorkin, R., Beirne, S., Shu, K., & Wallace, G. G. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.01.013 · Cited by 213
3D printed nervous system on a chip
Johnson, B. N., Lancaster, K. Z., Hogue, I. B., Meng, F., Kong, Y. L., Enquist, L. W., & McAlpine, M. C. (2016) · Lab on a Chip · doi:10.1039/c5lc01270h · Cited by 191
Rymansaib, Z., Iravani, P., Emslie, E., Medvidović‐Kosanović, M., Sak‐Bosnar, M., Verdejo, R., & Marken, F. (2016) · Electroanalysis · doi:10.1002/elan.201600017 · Cited by 176
3D-printed supercapacitor-powered electrochemiluminescent protein immunoarray
Kadimisetty, K., Mosa, I. M., Malla, S., Satterwhite-Warden, J. E., Kuhns, T. M., Faria, R. C., Lee, N. H., & Rusling, J. F. (2016) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.09.017 · Cited by 172
Point-of-care testing: applications of 3D printing
Chan, H. N., Tan, M. J. A., & Wu, H. (2017) · Lab on a Chip · doi:10.1039/c7lc00397h · Cited by 168
3D printed chip for electrochemical detection of influenza virus labeled with CdS quantum dots
Krejčová, L., Nejdl, L., Rodrigo, M. Á. M., et al. (2013) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2013.10.031 · Cited by 153
Bishop, G. W., Satterwhite-Warden, J. E., Bhakta, S., Kadimisetty, K., Gillette, K. M., Chen, E., & Rusling, J. F. (2015) · Analytical Chemistry · doi:10.1021/acs.analchem.5b00903 · Cited by 147
Self‐Contained Polymer/Metal 3D Printed Electrochemical Platform for Tailored Water Splitting
Ambrosi, A., & Pumera, M. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700655 · Cited by 141
Self-citationArenas, L. F., de León, C. P., & Walsh, F. C. (2017) · Electrochemistry Communications · doi:10.1016/j.elecom.2017.03.009 · Cited by 136
Krachunov, S., & Casson, A. J. (2016) · Sensors · doi:10.3390/s16101635 · Cited by 109
3D Printed Electrodes for Detection of Nitroaromatic Explosives and Nerve Agents
Tan, C., Nasir, M. Z. M., Ambrosi, A., et al. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b01614 · Cited by 103
DNA biosensing with 3D printing technology
Loo, A. H., Chua, C. K., & Pumera, M. (2016) · The Analyst · doi:10.1039/c6an02038k · Cited by 94
Self-citationFabrication of Versatile Channel Flow Cells for Quantitative Electroanalysis Using Prototyping
Snowden, M. E., King, P. H., Covington, J. A., Macpherson, J. V., & Unwin, P. R. (2010) · Analytical Chemistry · doi:10.1021/ac100345v · Cited by 91
Wang, Y., Zeinhom, M. M. A., Yang, M., Sun, R., Wang, S., Smith, J. N., Timchalk, C. A., Li, L., Lin, Y., & Du, D. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b02139 · Cited by 82
Rimington, R. P., Capel, A. J., Christie, S. D. R., & Lewis, M. P. (2017) · Lab on a Chip · doi:10.1039/c7lc00577f · Cited by 63
Microchip-based electrochemical detection using a 3-D printed wall-jet electrode device
Munshi, A. S., & Martin, R. S. (2015) · The Analyst · doi:10.1039/c5an01956g · Cited by 58
Targeted Protein Detection Using an All-in-One Mass Spectrometry Cartridge
Zhang, C., Glaros, T., & Manicke, N. E. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05571 · Cited by 54
Pelle, F. D., Battista, R. D., Vázquez, L., Palomares, F. J., Carlo, M. D., Sergi, M., Compagnone, D., & Escarpa, A. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.04.012 · Cited by 40
3D Printing-Based Integrated Water Quality Sensing System
Banna, M. H., Bera, K., Sochol, R. D., Lin, L., Najjaran, H., Sadiq, R., & Hoorfar, M. (2017) · Sensors · doi:10.3390/s17061336 · Cited by 33
Ng, B. Y. C., Wee, E. J. H., Woods, K., Anderson, W., Antaw, F., Tsang, H., West, N., & Trau, M. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b01685 · Cited by 23
Cited by
Additive-manufactured (3D-printed) electrochemical sensors: A critical review
Cardoso, R. M., Kalinke, C., Rocha, R. G., dos Santos, P. L., Rocha, D. P., Oliveira, P. R., Janegitz, B. C., Bonacin, J. A., Richter, E. M., & Munoz, R. A. A. (2020) · Analytica Chimica Acta · doi:10.1016/j.aca.2020.03.028 · Cited by 460
3D Printing for Electrochemical Energy Applications
Browne, M. P., Redondo, E., & Pumera, M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00783 · Cited by 434
Self-citationFused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
Complete Additively Manufactured (3D-Printed) Electrochemical Sensing Platform
Richter, E. M., Rocha, D. P., Cardoso, R. M., Keefe, E. M., Foster, C. W., Munoz, R. A. A., & Banks, C. E. (2019) · Analytical Chemistry · doi:10.1021/acs.analchem.9b02573 · Cited by 338
3D printed electrochemical energy storage devices
Chang, P., Mei, H., Zhou, S., Dassios, K. G., & Cheng, L. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11860d · Cited by 329
Metadata
- Authors
- Manzanares Palenzuela, C. L., Novotný, F., Krupička, P., Sofer, Z., & Pumera, M.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-04-16
- Volume
- 90
- Issue
- 9
- Pages
- 5753-5757
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2799843285
- Cited by
- 275
- References
- 40
- FWCI
- 12.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.