Species-Based Differences in Mechanical Properties, Cytocompatibility, and Printability of Methacrylated Collagen Hydrogels
Open accessThe DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Abstract
Collagen methacrylation is a promising approach to generate photo-cross-linkable cell-laden hydrogels with improved mechanical properties. However, the impact of species-based variations in amino acid composition and collagen isolation method on methacrylation degree (MD) and its subsequent effects on the physical properties of methacrylated collagen (CMA) hydrogels and cell response are unknown. Herein, we compared the effects of three collagen species (bovine, human, and rat), two collagen extraction methods (pepsin digestion and acid extraction), and two photoinitiators (lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) and Irgacure-2959 (I-2959)) on the physical properties of CMA hydrogels, printability and mesenchymal stem cell (MSC) response. Human collagen showed the highest MD. LAP was more cytocompatible than I-2959. The compressive modulus and cell viability of rat CMA were significantly higher ( p < 0.05) than bovine CMA. Human CMA yielded constructs with superior print fidelity. Together, these results suggest that careful selection of collagen source and cross-linking conditions is essential for biomimetic design of CMA hydrogels for tissue engineering applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“These peaks are attributed to the methyl and vinyl protons of the methacrylate groups, confirming that the methacrylation reaction with MAA successfully occurred through substitution at the available amine sites [29].”
In the citing paper
“The calculated methacrylation degrees (MD) were approximately 73.5% for ColMA and 75.1% for SilMA (Figure F), confirming the efficient functionalization of both biomacromolecules [28] [29].”
Citations
Cites
The protein data bank: A computer-based archival file for macromolecular structures
Bernstein, F. C., Koetzle, T. F., Williams, G. J. B., Meyer, E. F., Brice, M. D., Rodgers, J. R., Kennard, O., Shimanouchi, T., & Tasumi, M. (1977) · Journal of Molecular Biology · doi:10.1016/s0022-2836(77)80200-3 · Cited by 8,578
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
KADLER, K. E., HOLMES, D. F., TROTTER, J. A., & CHAPMAN, J. A. (1996) · Biochemical Journal · doi:10.1042/bj3160001 · Cited by 1,449
Fairbanks, B. D., Schwartz, M. P., Bowman, C. N., & Anseth, K. S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.08.055 · Cited by 1,200
Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950
Di Lullo, G. A., Sweeney, S. M., Körkkö, J., Ala-Kokko, L., & San Antonio, J. D. (2002) · Journal of Biological Chemistry · doi:10.1074/jbc.m110709200 · Cited by 905
Application of Collagen Scaffold in Tissue Engineering: Recent Advances and New Perspectives
Dong, C., & Lv, Y. (2016) · Polymers · doi:10.3390/polym8020042 · Cited by 851
The Chromatographic Separation and Amino Acid Composition of the Subunits of Several Collagens*
Piez, K. A., Eigner, E. A., & Lewis, M. S. (1963) · Biochemistry · doi:10.1021/bi00901a012 · Cited by 702
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Research works printed but not linked: 2
- Techatanawat S., 2011, Asian Biomed, 5, 787
- Zennifer A., 2021, Mater. Sci. Eng., C, 137, 112576
Cited by
Lu, Z., Gao, W., Liu, F., Cui, J., Feng, S., Chen, L., Guo, Y., Wang, Z., Mao, Z., & Zhang, B. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104443 · Cited by 86
Collagen-Based Hydrogels for the Eye: A Comprehensive Review
Rana, D., Desai, N., Salave, S., Karunakaran, B., Giri, J., Benival, D. M., Gorantla, S., & Kommineni, N. (2023) · Gels · doi:10.3390/gels9080643 · Cited by 54
Patrawalla, N. Y., Kajave, N. S., Albanna, M. Z., & Kishore, V. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14070363 · Cited by 26
“One approach to improve the printability of birth ECM inks may be to modify the collagen backbone via methacrylation of the free amine groups, which can enable photocrosslinking of the printed construct for better retention of shape fidelity [53,54].”
BackgroundSelf-citationDeciphering UVA/Riboflavin Collagen Crosslinking: A Pathway to Improve Biomedical Materials
Fan, L., Jung, O., Herrmann, M., Shirokikh, M., Stojanović, S., Najman, S. J., Körte, F., Xiong, X. B., Schenke‐Layland, K., & Barbeck, M. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202401742 · Cited by 25
Magnetic Alignment of Collagen: Principles, Methods, Applications, and Fiber Alignment Analyses
Patrawalla, N. Y., Ravi Raj, K. G., Nazar, V., & Kishore, V. (2024) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2023.0222 · Cited by 22
“9–11 Over the last few decades, new biofabrication methods have been developed to align collagen fibers and yield tissue-mimicking anisotropic collagen scaffolds with improved mechanical properties.”
Self-citationChen, C.-L., Wei, S., Chen, W., Hsu, T.-L., & Chen, Y. (2023) · Journal of Tissue Engineering · doi:10.1177/20417314231201231 · Cited by 23
Advances in photocrosslinked natural hydrogel‐based microspheres for bone repair
Li, H., Zhou, J., Zhou, Y., Dao, J., Wei, D., & Wang, Y. (2024) · Journal of Polymer Science · doi:10.1002/pol.20240302 · Cited by 19
Unagolla, J. M., Gaihre, B., & Jayasuriya, A. C. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300414 · Cited by 13
Genç, H., Cianciosi, A., Lohse, R., Stahlhut, P., Gröll, J., Alexiou, C., Cicha, I., & Jüngst, T. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.2c01536 · Cited by 16
Ranatunga, B., Sekar, M., Hashmi, A. R., Zahra, F., Ravi, R. N., Kumar, B. R. P., Hamod, M. A., Hamood, N. A., Begum, M. Y., Wong, L., et al. (2026) · Drug Design Development and Therapy · doi:10.2147/dddt.s578261 · Cited by 15
An infection-responsive collagen-based wet-spun textile fibre for wound monitoring
Gorman, J., Brooker, C., Li, X., & Tronci, G. (2025) · Polymer · doi:10.1016/j.polymer.2025.129113 · Cited by 8
Emerging trends in photo-crosslinkable polymeric biomaterials in regenerative medicine
Akhmetkarimova, Z. S., Mukhlis, S., Yıldırım, E., Zhumanazarova, G. M., Ogay, V. B., Altaeva, N., Ashikbayeva, M., & Kudaibergen, G. K. (2025) · Materials Today Chemistry · doi:10.1016/j.mtchem.2025.103172 · Cited by 6
Ruliffson, B. N. K., Larson, S., Xhupi, E. K., Herrera-Diaz, D. L., & Whittington, C. F. (2024) · Lymphatics · doi:10.3390/lymphatics2030015 · Cited by 4
Acrylation of bioresources for 3D printing: strategies, technologies, and applications
Abdullah, T., Kaçakgil, E. C., Gedik, F., Akbulut, V. M., & Dizman, C. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101641 · Cited by 3
Tan, P. L., Chen, H., & Tan, L. P. (2026) · Materials Today Bio · doi:10.1016/j.mtbio.2026.103146 · Cited by 2
“LAP is widely used for cyto-compatible photopolymerization under appropriate conditions; however, its effects are known to depend on photoinitiator concentration, light exposure and cell type [44 – 47].”
van Bochove, B., van Dommelen, L. H. A., Macarez, A., Ankoné, M. J. K., Versteeg, E. M. M., van Kuppevelt, T. H., Daamen, W. F., Poot, A. A., & Grijpma, D. W. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c00971 · Cited by 2
Lee, K., Baek, J., Grogan, S. P., Koo, T.-H., & DʼLima, D. D. (2025) · Gels · doi:10.3390/gels11110850 · Cited by 2
“This approach imparts significant mechanical strength to collagen hydrogels through UV-induced polymerization of methacrylate collagen [25–27].”
de Anda, A. R., Macarez, A., Ankoné, M. J. K., Spoljaric, S., van Dommelen, L. H. A., Versteeg, E. M. M., van Kuppevelt, T. H., Daamen, W. F., Grijpma, D. W., Poot, A. A., et al. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202500288 · Cited by 1
“Collagen promotes cell adhesion and proliferation [14, 15], is biodegradable [4], and haemostatic [16], making it relevant for medical applications.”
Afshar, A. K., Mirshafiei, M., Saberi, A., Yazdian, F. A., Rashedi, H., Rahdar, A., & Baino, F. (2026) · Bioprinting · doi:10.1016/j.bprint.2026.e00487 · Cited by 2
Stecher, S., Schenk, J., Cianciosi, A., Hemmen, K., Böhringer, D., Dusi, F., Faber, J., Stahlhut, P., Gantert, B., Rouenhoff, E., et al. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.71353 · Cited by 2
“By contrast, formulations with lower polymer concentrations (in the range of 3–6 mg mL − 1 ) have only been successfully processed using FRESH (Freeform Reversible Embedding of Suspended Hydrogels) printing, which utilizes a support bath to maintain structural fidelity during bioprinting [36–39].”
Nunes, A., Pramanick, A., Kelly, D., Ramakrishnan, R., Sergis, V., Doan, V. K., Tran, H. A., Lim, K. S., de Almeida, H. V., & Daly, A. C. (2026) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.64898/2026.01.13.699021 · Cited by 1
“Chemical crosslinking of collagen can be achieved using glutaraldehyde and carbodiimide crosslinkers 7,8 or by functionalising the polymer with methacrylate or norbornene side groups that support photocrosslinking reactions 9,10 .”
Antunes, B. S. L., Pedrini, F., Komatsu, D., Asami, J., Dicko, C., & Duek, E. A. R. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.154129
Kelah Collagen: A Comparative Characterization With Barramundi and Tilapia Collagens
Musa, N. F., Azman, F. A., Azimi, A. S. N., Alaudin, N. A., Latiff, N. A., Malik, S. A., Sarobo, Z., & Zaidel, D. N. A. (2025) · Environmental Quality Management · doi:10.1002/tqem.70147
AlYammahi, J., Sunder, K., Nagarajan, V., Deliorman, M., Qasaimeh, M. A., & Vijayavenkataraman, S. (2026) · Advanced Sustainable Systems · doi:10.1002/adsu.70441
“%) and NC-ColMA were compared with ColMA obtained from different sources with different MD; bovine MD = 25%, humane MD = 40%, and rat MD = 25%, as reported by Sarah et al. (see Figure 2c) [10].”
Ye, M., Cui, G., Zhu, Z., Zheng, W., He, H., & Xiao, J. (2026) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6c00462
Approaches for recapitulating the extracellular matrix in organs-on-chip
Singletary, M. W., Stack, R. N., Garcia, M., Schmoyer, S., Elayaperumal, S., & Polacheck, W. J. (2026) · Cell Biomaterials · doi:10.1016/j.celbio.2026.100577
Metadata
- Authors
- Ali, S. M., Patrawalla, N. Y., Kajave, N. S., Brown, A. B., & Kishore, V.
- Affiliations
- Florida Institute of Technology (US)
- Corresponding author
- Kishore, Vipuil
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-11-23
- Volume
- 23
- Issue
- 12
- Pages
- 5137-5147
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- PMC
- PMC11103796
- OpenAlex
- W4309809879
- Cited by
- 26
- References
- 55
- Citations by year
- 2026: 9 · 2025: 7 · 2024: 5 · 2023: 5
- FWCI
- 1.06
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- PubMed Central (acceptedVersion)
- Funders
- Center for Scientific Review (1R15AR071102)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Collagen: Extraction and Characterization
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- collagen gel, species differences, pepsin digestion, acid extraction, photoinitiators, Irgacure 2959, printability, mesenchymal stem cells, cytocompatibility, compressive modulus, cell viability, cell-laden hydrogels, tissue engineering scaffolds
- MeSH terms
- Animals, Cattle, Cell Survival, Collagen, Humans, Hydrogels, Tissue Engineering, Rats, Mesenchymal Stem Cells
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.