Species-Based Differences in Mechanical Properties, Cytocompatibility, and Printability of Methacrylated Collagen Hydrogels
Open accessThe DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Abstract
Collagen methacrylation is a promising approach to generate photo-cross-linkable cell-laden hydrogels with improved mechanical properties. However, the impact of species-based variations in amino acid composition and collagen isolation method on methacrylation degree (MD) and its subsequent effects on the physical properties of methacrylated collagen (CMA) hydrogels and cell response are unknown. Herein, we compared the effects of three collagen species (bovine, human, and rat), two collagen extraction methods (pepsin digestion and acid extraction), and two photoinitiators (lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) and Irgacure-2959 (I-2959)) on the physical properties of CMA hydrogels, printability and mesenchymal stem cell (MSC) response. Human collagen showed the highest MD. LAP was more cytocompatible than I-2959. The compressive modulus and cell viability of rat CMA were significantly higher ( p < 0.05) than bovine CMA. Human CMA yielded constructs with superior print fidelity. Together, these results suggest that careful selection of collagen source and cross-linking conditions is essential for biomimetic design of CMA hydrogels for tissue engineering applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“These peaks are attributed to the methyl and vinyl protons of the methacrylate groups, confirming that the methacrylation reaction with MAA successfully occurred through substitution at the available amine sites [29].”
In the citing paper
“The calculated methacrylation degrees (MD) were approximately 73.5% for ColMA and 75.1% for SilMA (Figure F), confirming the efficient functionalization of both biomacromolecules [28] [29].”
Citations
Cites
The protein data bank: A computer-based archival file for macromolecular structures
Bernstein, F. C., Koetzle, T. F., Williams, G. J. B., Meyer, E. F., Brice, M. D., Rodgers, J. R., Kennard, O., Shimanouchi, T., & Tasumi, M. (1977) · Journal of Molecular Biology · doi:10.1016/s0022-2836(77)80200-3 · Cited by 8,578
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
KADLER, K. E., HOLMES, D. F., TROTTER, J. A., & CHAPMAN, J. A. (1996) · Biochemical Journal · doi:10.1042/bj3160001 · Cited by 1,449
Fairbanks, B. D., Schwartz, M. P., Bowman, C. N., & Anseth, K. S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.08.055 · Cited by 1,200
Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950
Di Lullo, G. A., Sweeney, S. M., Körkkö, J., Ala-Kokko, L., & San Antonio, J. D. (2002) · Journal of Biological Chemistry · doi:10.1074/jbc.m110709200 · Cited by 905
Application of Collagen Scaffold in Tissue Engineering: Recent Advances and New Perspectives
Dong, C., & Lv, Y. (2016) · Polymers · doi:10.3390/polym8020042 · Cited by 851
The Chromatographic Separation and Amino Acid Composition of the Subunits of Several Collagens*
Piez, K. A., Eigner, E. A., & Lewis, M. S. (1963) · Biochemistry · doi:10.1021/bi00901a012 · Cited by 702
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Collagenase unwinds triple‐helical collagen prior to peptide bond hydrolysis
Chung, L., Dinakarpandian, D., Yoshida, N., Lauer‐Fields, J. L., Fields, G. B., Visse, R., & Nagase, H. (2004) · The EMBO Journal · doi:10.1038/sj.emboj.7600318 · Cited by 675
Collagen-based cell migration models in vitro and in vivo
Wolf, K., Alexander, S., Schacht, V., Coussens, L. M., von Andrian, U. H., van Rheenen, J., Deryugina, E., & Friedl, P. (2009) · Seminars in Cell & Developmental Biology · doi:10.1016/j.semcdb.2009.08.005 · Cited by 637
Processing of collagen based biomaterials and the resulting materials properties
Meyer, M. (2019) · BioMedical Engineering OnLine · doi:10.1186/s12938-019-0647-0 · Cited by 539
Exposito, J.-Y., Valcourt, U., Cluzel, C., & Lethias, C. (2010) · International Journal of Molecular Sciences · doi:10.3390/ijms11020407 · Cited by 312
Bubnis, W. A., & Ofner, C. M. (1992) · Analytical Biochemistry · doi:10.1016/0003-2697(92)90513-7 · Cited by 265
Collagen as Bioink for Bioprinting: A Comprehensive Review
Osidak, E. O., Kozhukhov, V. I., Osidak, M. S., & Domogatsky, S. P. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v6i3.270 · Cited by 253
Extrusion bioprinting: Recent progress, challenges, and future opportunities
Ramesh, S., Harrysson, O. L. A., Rao, P. K., Tamayol, A., Cormier, D. R., Zhang, Y., & Rivero, I. V. (2021) · Bioprinting · doi:10.1016/j.bprint.2020.e00116 · Cited by 243
Mechanical Properties of Native and Cross-linked Type I Collagen Fibrils
Yang, L., van der Werf, K. O., Fitié, C. F. C., Bennink, M. L., Dijkstra, P. J., & Feijen, J. (2008) · Biophysical Journal · doi:10.1529/biophysj.107.111013 · Cited by 234
Collagen-based bioinks for hard tissue engineering applications: a comprehensive review
Marques, C. F., Diogo, G. S., Pina, S., Oliveira, J. M., Silva, T. H., & Reis, R. L. (2019) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-019-6234-x · Cited by 233
Kishore, V., Bullock, W., Sun, X., Van Dyke, W. S., & Akkus, O. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.11.066 · Cited by 224
Self-citationXu, H., Casillas, J., Krishnamoorthy, S., & Xu, C. (2020) · Biomedical Materials · doi:10.1088/1748-605x/ab954e · Cited by 196
Comparison of physical–chemical properties of type I collagen from different species
Lin, Y. K., & Liu, D. C. (2006) · Food Chemistry · doi:10.1016/j.foodchem.2005.06.053 · Cited by 193
Ofner, III, & Bubnis, W. A. (1996) · Pharmaceutical Research · doi:10.1023/a:1016029023910 · Cited by 174
Zhang, J., Eyisoylu, H., Qin, X.-H., Rubert, M., & Müller, R. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.12.026 · Cited by 169
Hydrogels for 3D mammalian cell culture: a starting guide for laboratory practice
Ruedinger, F., Lavrentieva, A., Blume, C., Pepelanova, I., & Scheper, T. (2015) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-014-6253-y · Cited by 166
3D bioprinting and photocrosslinking: emerging strategies & future perspectives
Zennifer, A., Manivannan, S., Sethuraman, S., Kumbar, S. G., & Sundaramurthi, D. (2021) · Biomaterials Advances · doi:10.1016/j.msec.2021.112576 · Cited by 165
Fiber alignment drives changes in architectural and mechanical features in collagen matrices
Taufalele, P., VanderBurgh, J. A., Muñoz, A., Zanotelli, M. R., & Reinhart‐King, C. A. (2019) · PLoS ONE · doi:10.1371/journal.pone.0216537 · Cited by 146
Bioprinting of Collagen: Considerations, Potentials, and Applications
Lee, J. M., Suen, S. K. Q., Ng, W. L., Ma, W. C., & Yeong, W. Y. (2021) · Macromolecular Bioscience · doi:10.1002/mabi.202000280 · Cited by 141
Sato, K., Ebihara, T., Adachi, E., Kawashima, S., Hattori, S., & Irie, S. (2000) · Journal of Biological Chemistry · doi:10.1074/jbc.m003700200 · Cited by 129
Characterization of Methacrylated Type-I Collagen as a Dynamic, Photoactive Hydrogel
Gaudet, I. D., & Shreiber, D. I. (2012) · Biointerphases · doi:10.1007/s13758-012-0025-y · Cited by 128
Extrusion-based 3D printing of poly(propylene fumarate) scaffolds with hydroxyapatite gradients
Trachtenberg, J. E., Placone, J. K., Smith, B. T., Fisher, J. P., & Mikos, A. G. (2017) · Journal of Biomaterials Science, Polymer Edition · doi:10.1080/09205063.2017.1286184 · Cited by 116
Enhanced physicochemical properties of collagen by using EDC/NHS-crosslinking
Yang, C. (2012) · Bulletin of Materials Science · doi:10.1007/s12034-012-0376-5 · Cited by 116
Injectable Collagen–Genipin Gel for the Treatment of Spinal Cord Injury: In Vitro Studies
Macaya, D., Ng, K. K., & Spector, M. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101720 · Cited by 106
Stiffness Matters: Fine-Tuned Hydrogel Elasticity Alters Chondrogenic Redifferentiation
Bachmann, B., Spitz, S., Schädl, B., Teuschl, A. H., Redl, H., Nürnberger, S., & Ertl, P. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00373 · Cited by 105
SEM sample preparation for cells on 3D scaffolds by freeze‐drying and HMDS
Lee, J. T. Y., & Chow, K. L. (2011) · Scanning · doi:10.1002/sca.20271 · Cited by 104
Uquillas, J. A., Kishore, V., & Akkuş, O. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.06.012 · Cited by 95
Self-citationMethacrylation Induces Rapid, Temperature-Dependent, Reversible Self-Assembly of Type-I Collagen
Drzewiecki, K. E., Parmar, A. S., Gaudet, I. D., Branch, J. R., Pike, D. H., Nanda, V., & Shreiber, D. I. (2014) · Langmuir · doi:10.1021/la502418s · Cited by 74
Mechanical properties of murine and porcine ocular tissues in compression
Worthington, K. S., Wiley, L. A., Bartlett, A. M., Stone, E. M., Mullins, R. F., Salem, A. K., Guymon, C. A., & Tucker, B. A. (2014) · Experimental Eye Research · doi:10.1016/j.exer.2014.02.020 · Cited by 73
Kajave, N. S., Schmitt, T., Nguyen, T., & Kishore, V. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110290 · Cited by 70
Self-citationExtraction and Purification of Collagenase Enzymes: A Critical Review
Daboor (2010) · American journal of biochemistry & biotechnology/American journal of biochemistry and biotechnology · doi:10.3844/ajbbsp.2010.239.263 · Cited by 57
Walimbe, T., & Panitch, A. (2020) · Bioengineering · doi:10.3390/bioengineering7040156 · Cited by 54
Functional hydrogel bioink, a key challenge of 3D cellular bioprinting
Bian, L. (2020) · APL Bioengineering · doi:10.1063/5.0018548 · Cited by 51
Omobono, M. A., Zhao, X., Furlong, M. A., Kwon, C.-H., Gill, T. J., Randolph, M. A., & Redmond, R. W. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35266 · Cited by 49
Properties of Collagen/Sodium Alginate Hydrogels for Bioprinting of Skin Models
Jiao, T., Lian, Q., Lian, W., Wang, Y., Li, D., Reis, R. L., & Oliveira, J. M. (2022) · Journal of Bionic Engineering · doi:10.1007/s42235-022-00251-8 · Cited by 48
Bioglass incorporated methacrylated collagen bioactive ink for 3D printing of bone tissue
Kajave, N. S., Schmitt, T., Nguyen, T.-U., Gaharwar, A. K., & Kishore, V. (2021) · Biomedical Materials · doi:10.1088/1748-605x/abc744 · Cited by 46
Self-citationThe Collagen Origin Influences the Degradation Kinetics of Guided Bone Regeneration Membranes
Vallecillo‐Rivas, M., Toledano‐Osorio, M., Vallecillo, C., Toledano, M., & Osorio, R. (2021) · Polymers · doi:10.3390/polym13173007 · Cited by 40
Štěpanovská, J., Otáhal, M., Hanzalek, K., Šupová, M., & Matějka, R. (2021) · Gels · doi:10.3390/gels7040252 · Cited by 34
Jongprasitkul, H., Turunen, S., Parihar, V. S., Annurakshita, S., & Kellomäki, M. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c01322 · Cited by 27
Comparative Biochemical Analysis of Sea Urchin Peristome and Rat Tail Tendon Collagen
Robinson, J. J. (1997) · Comparative Biochemistry and Physiology Part B Biochemistry and Molecular Biology · doi:10.1016/s0305-0491(97)00092-8 · Cited by 26
Schmitt, T., Kajave, N. S., Cai, H., Gu, L., Albanna, M. Z., & Kishore, V. (2020) · Journal of Biomaterials Applications · doi:10.1177/0885328220959162 · Cited by 25
Self-citationBaltazar, T., Kajave, N. S., Rodriguez, M., Chakraborty, S., Jiang, B., Skardal, A., Kishore, V., Pober, J. S., & Albanna, M. Z. (2022) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35080 · Cited by 20
Self-citationMechanical performance of collagen gels is dependent on purity, α1/α2 ratio, and telopeptides
Slyker, L., Diamantides, N., Kim, J.-K., & Bonassar, L. J. (2021) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37261 · Cited by 19
Variation in hydrogel formation and network structure for telo-, atelo- and methacrylated collagens
Maher, M. K., White, J. F., Glattauer, V., Yue, Z., Hughes, T. C., Ramshaw, J. A. M., & Wallace, G. G. (2022) · Polymers · doi:10.3390/polym14091775 · Cited by 17
Structure of type I collagen dimers
Nakamura, Y. (1987) · International Journal of Biological Macromolecules · doi:10.1016/0141-8130(87)90067-5 · Cited by 14
Kajave, N. S., Schmitt, T., Patrawalla, N. Y., & Kishore, V. (2022) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2022.0035 · Cited by 13
Self-citation
Research works printed but not linked: 2
- Techatanawat S., 2011, Asian Biomed, 5, 787
- Zennifer A., 2021, Mater. Sci. Eng., C, 137, 112576
Cited by
Lu, Z., Gao, W., Liu, F., Cui, J., Feng, S., Chen, L., Guo, Y., Wang, Z., Mao, Z., & Zhang, B. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104443 · Cited by 86
Collagen-Based Hydrogels for the Eye: A Comprehensive Review
Rana, D., Desai, N., Salave, S., Karunakaran, B., Giri, J., Benival, D. M., Gorantla, S., & Kommineni, N. (2023) · Gels · doi:10.3390/gels9080643 · Cited by 54
Patrawalla, N. Y., Kajave, N. S., Albanna, M. Z., & Kishore, V. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14070363 · Cited by 26
“One approach to improve the printability of birth ECM inks may be to modify the collagen backbone via methacrylation of the free amine groups, which can enable photocrosslinking of the printed construct for better retention of shape fidelity [53,54].”
BackgroundSelf-citationDeciphering UVA/Riboflavin Collagen Crosslinking: A Pathway to Improve Biomedical Materials
Fan, L., Jung, O., Herrmann, M., Shirokikh, M., Stojanović, S., Najman, S. J., Körte, F., Xiong, X. B., Schenke‐Layland, K., & Barbeck, M. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202401742 · Cited by 25
Magnetic Alignment of Collagen: Principles, Methods, Applications, and Fiber Alignment Analyses
Patrawalla, N. Y., Ravi Raj, K. G., Nazar, V., & Kishore, V. (2024) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2023.0222 · Cited by 22
“9–11 Over the last few decades, new biofabrication methods have been developed to align collagen fibers and yield tissue-mimicking anisotropic collagen scaffolds with improved mechanical properties.”
Self-citation
Metadata
- Authors
- Ali, S. M., Patrawalla, N. Y., Kajave, N. S., Brown, A. B., & Kishore, V.
- Affiliations
- Florida Institute of Technology (US)
- Corresponding author
- Kishore, Vipuil
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-11-23
- Volume
- 23
- Issue
- 12
- Pages
- 5137-5147
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- PMC
- PMC11103796
- OpenAlex
- W4309809879
- Cited by
- 26
- References
- 55
- Citations by year
- 2026: 9 · 2025: 7 · 2024: 5 · 2023: 5
- FWCI
- 1.06
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- PubMed Central (acceptedVersion)
- Funders
- Center for Scientific Review (1R15AR071102)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Collagen: Extraction and Characterization
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- collagen gel, species differences, pepsin digestion, acid extraction, photoinitiators, Irgacure 2959, printability, mesenchymal stem cells, cytocompatibility, compressive modulus, cell viability, cell-laden hydrogels, tissue engineering scaffolds
- MeSH terms
- Animals, Cattle, Cell Survival, Collagen, Humans, Hydrogels, Tissue Engineering, Rats, Mesenchymal Stem Cells
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.