Cited by 1,652Advanced Battery Materials and TechnologiesAdvancements in Battery MaterialsThermal Expansion and Ionic Conductivity

The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.

Interface Stability in Solid-State Batteries

Open access

Richards, William D., Miara, Lincoln J., Wang, Yan, Kim, Jae Chul, Ceder, Gerbrand·2016·Chemistry of Materials

DOI 10.1021/acs.chemmater.5b04082

Open this paper in CoChat — free account

Abstract

Development of high conductivity solid-state electrolytes for lithium ion batteries has proceeded rapidly in recent years, but incorporating these new materials into high-performing batteries has proven difficult. Interfacial resistance is now the limiting factor in many systems, but the exact mechanisms of this resistance have not been fully explained - in part because experimental evaluation of the interface can be very difficult. In this work, we develop a computational methodology to examine the thermodynamics of formation of resistive interfacial phases. The predicted interfacial phase formation is well correlated with experimental interfacial observations and battery performance. We calculate that thiophosphate electrolytes have especially high reactivity with high voltage cathodes and a narrow electrochemical stability window. We also find that a number of known electrolytes are not inherently stable but react in situ with the electrode to form passivating but ionically conducting barrier layers. As a reference for experimentalists, we tabulate the stability and expected decomposition products for a wide range of electrolyte, coating, and electrode materials including a number of high-performing combinations that have not yet been attempted experimentally.

Integrity signals

Registry

Crossref · 10.1021/acs.chemmater.5b04082

Cites

60 of 60 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Electron-energy-loss spectra and the structural stability of nickel oxide: An LSDA+U study
Dudarev, S. L., Botton, G. A., Savrasov, S. Y., Humphreys, C. J., & Sutton, A. P. (1998) · Physical review. B, Condensed matter · doi:10.1103/physrevb.57.1505 · Cited by 15,260
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Self-citation
Band theory and Mott insulators: Hubbard U instead of Stoner I
Anisimov, V. I., Zaanen, J., & Andersen, O. K. (1991) · Physical review. B, Condensed matter · doi:10.1103/physrevb.44.943 · Cited by 7,492
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,997
Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis
Ong, S. P., Richards, W. D., Jain, A., Hautier, G., Kocher, M., Cholia, S., Gunter, D., Chevrier, V. L., Persson, K. A., & Ceder, G. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2012.10.028 · Cited by 4,534
Self-citation
NIST-JANAF Thermochemical Tables
Chase, M. W. (1998) · Medical Entomology and Zoology · Cited by 3,312
Fast Lithium Ion Conduction in Garnet‐Type Li 7 La 3 Zr 2 O 12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,304

Flagged first, then by citations

Show all 60 references

Research works printed but not linked: 1

Kubaschewski, 1993, Materials Thermochemistry

Sorted by citations

Items 101–200 of 1,000

Opportunities and Challenges of Interface Engineering in Bimetallic Nanostructure for Enhanced Electrocatalysis
Shao, Q., Wang, P., & Huang, X. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201806419 · Cited by 338
Interface engineering of sulfide electrolytes for all-solid-state lithium batteries
Xu, R., Han, F., Ji, X. Y., Fan, X., Tu, J. P., & Wang, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.061 · Cited by 335
A new halospinel superionic conductor for high-voltage all solid state lithium batteries
Zhou, L., Kwok, C. Y., Shyamsunder, A., Zhang, Q., Wu, X., & Nazar, L. F. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01017k · Cited by 335
Advanced Liquid Electrolytes for Rechargeable Li Metal Batteries
Jie, Y., Ren, X., Cao, R., Cai, W., & Jiao, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910777 · Cited by 333
Regulating Li deposition by constructing LiF-rich host for dendrite-free lithium metal anode
Yuan, Y., Wu, F., Bai, Y., Li, Y., Chen, G., Wang, Z., & Wu, C. K. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.06.022 · Cited by 327
Layered Cathode Materials for Lithium-Ion Batteries: Review of Computational Studies on LiNi 1– x – y Co x Mn y O 2 and LiNi 1– x – y Co x Al y O 2
Chakraborty, A., Kunnikuruvan, S., Kumar, S., Markovsky, B., Aurbach, D., Dixit, M., & Major, D. T. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b04066 · Cited by 327
In situ polymerization of solid-state polymer electrolytes for lithium metal batteries: a review
Zou, S., Yang, Y., Wang, J., Zhou, X., Wan, X., Zhu, M., & Liu, J. (2024) · Energy & Environmental Science · doi:10.1039/d4ee00822g · Cited by 322
Electrolyte/Electrode Interfaces in All-Solid-State Lithium Batteries: A Review
Pang, Y., Pan, J., Yang, J., Zheng, S., & Wang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00092-1 · Cited by 321
Review of Multifunctional Separators: Stabilizing the Cathode and the Anode for Alkali (Li, Na, and K) Metal–Sulfur and Selenium Batteries
Hao, H., Hutter, T., Boyce, B. L., Watt, J. D., Liu, P., & Mitlin, D. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00838 · Cited by 321
Operando X-ray photoelectron spectroscopy of solid electrolyte interphase formation and evolution in Li2S-P2S5 solid-state electrolytes
Wood, K. N., Steirer, K. X., Hafner, S. E., Ban, C., Santhanagopalan, S., Lee, S.-H., & Teeter, G. R. (2018) · Nature Communications · doi:10.1038/s41467-018-04762-z · Cited by 319
An Electron/Ion Dual‐Conductive Alloy Framework for High‐Rate and High‐Capacity Solid‐State Lithium‐Metal Batteries
Yang, C., Xie, H., Ping, W., Fu, K. K., Liu, B., Rao, J., Dai, J., Wang, C., Pastel, G., & Hu, L. (2018) · Advanced Materials · doi:10.1002/adma.201804815 · Cited by 318
Rechargeable Solid‐State Li–Air and Li–S Batteries: Materials, Construction, and Challenges
Liu, Y., He, P., & Zhou, H. S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701602 · Cited by 317
Single‐ or Poly‐Crystalline Ni‐Rich Layered Cathode, Sulfide or Halide Solid Electrolyte: Which Will be the Winners for All‐Solid‐State Batteries?
Han, Y., Jung, S. H., Kwak, H., Jun, S., Kwak, H. H., Lee, J., Hong, S., & Jung, Y. S. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100126 · Cited by 314
A review of challenges and issues concerning interfaces for all-solid-state batteries
Lim, H., Park, J., Shin, H., Jeong, J., Kim, J. T., Nam, K., Jung, H., & Chung, K. Y. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.10.011 · Cited by 313
Self-citation
High magnesium mobility in ternary spinel chalcogenides
Canepa, P., Bo, S., Gautam, G. S., Key, B., Richards, W. D., Shi, T., Tian, Y., Wang, Y. E., Li, J., & Ceder, G. (2017) · Nature Communications · doi:10.1038/s41467-017-01772-1 · Cited by 316
Self-citation
Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach
Hippauf, F., Schumm, B., Doerfler, S., Althues, H., Fujiki, S., Shiratsuchi, T., Tsujimura, T., Aihara, Y., & Kaskel, S. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.05.033 · Cited by 308
Visualizing Chemomechanical Degradation of a Solid-State Battery Electrolyte
Tippens, J., Miers, J., Afshar, A., Lewis, J. A., Cortes, F. J. Q., Qiao, H., Marchese, T. S., Leo, C. V. D., Saldaña, C., & McDowell, M. T. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00816 · Cited by 308
Continuous plating/stripping behavior of solid-state lithium metal anode in a 3D ion-conductive framework
Yang, C., Zhang, L., Liu, B., Xu, S., Hamann, T. R., McOwen, D. W., Dai, J., Luo, W. H., Gong, Y., Wachsman, E. D., et al. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1719758115 · Cited by 307
New Oxyhalide Solid Electrolytes with High Lithium Ionic Conductivity >10 mS cm −1 for All‐Solid‐State Batteries
Tanaka, Y., Ueno, K., Mizuno, K., Takeuchi, K., Asano, T., & Sakai, A. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202217581 · Cited by 306
Strategies towards enabling lithium metal in batteries: interphases and electrodes
Horstmann, B., Shi, J., Amine, R., Werres, M., He, X., Jia, H., Hausen, F., Cekić-Lasković, I., Wiemers‐Meyer, S., Lopez, J., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00767j · Cited by 305
Unlocking the Energy Capabilities of Lithium Metal Electrode with Solid-State Electrolytes
Shen, Y., Zhang, Y., Han, S., Wang, J., Peng, Z., & Chen, L. (2018) · Joule · doi:10.1016/j.joule.2018.06.021 · Cited by 297
Room-Temperature All-solid-state Rechargeable Sodium-ion Batteries with a Cl-doped Na3PS4 Superionic Conductor
Chu, I., Kompella, C. S., Nguyen, H., Zhu, Z., Hy, S., Deng, Z., Meng, Y. S., & Ong, S. P. (2016) · Scientific Reports · doi:10.1038/srep33733 · Cited by 296
A stable cathode-solid electrolyte composite for high-voltage, long-cycle-life solid-state sodium-ion batteries
Wu, E. A., Banerjee, S., Tang, H., Richardson, P. M., Doux, J., Qi, J., Zhu, Z., Grenier, A., Li, Y., Zhao, E., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-21488-7 · Cited by 296
Lithium solid-state batteries: State-of-the-art and challenges for materials, interfaces and processing
Boaretto, N., Garbayo, Í., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas‐Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 294
Antiperovskite Electrolytes for Solid-State Batteries
Xia, W., Zhao, Y., Zhao, F., Adair, K., Zhao, R., Li, S., Zou, R., Zhao, Y., & Sun, X. A. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00594 · Cited by 297
Modeling of internal mechanical failure of all-solid-state batteries during electrochemical cycling, and implications for battery design
Bucci, G., Swamy, T., Chiang, Y., & Carter, W. C. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03199h · Cited by 290
Garnet Solid Electrolyte Protected Li-Metal Batteries
Liu, B., Gong, Y., Fu, K. K., Han, X., Yao, Y., Pastel, G., Yang, C., Xie, H., Wachsman, E. D., & Hu, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03887 · Cited by 290
Redox-active cathode interphases in solid-state batteries
Koerver, R., Walther, F., Aygün, I., Sann, J., Dietrich, C., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07641j · Cited by 290
Addressing Interfacial Issues in Liquid-Based and Solid-State Batteries by Atomic and Molecular Layer Deposition
Zhao, Y., Zheng, K., & Sun, X. A. (2018) · Joule · doi:10.1016/j.joule.2018.11.012 · Cited by 288
From Lithium‐Metal toward Anode‐Free Solid‐State Batteries: Current Developments, Issues, and Challenges
Heubner, C., Maletti, S., Auer, H., Hüttl, J., Voigt, K., Lohrberg, O., Nikolowski, K., Partsch, M., & Michaelis, A. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106608 · Cited by 288
Universal Soldering of Lithium and Sodium Alloys on Various Substrates for Batteries
Wang, C., Xie, H., Zhang, L., Gong, Y., Pastel, G., Dai, J., Liu, B., Wachsman, E. D., & Hu, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701963 · Cited by 282
Status, promises, and challenges of nanocomposite solid-state electrolytes for safe and high performance lithium batteries
Wan, J., Xie, J., Mackanic, D. G., Burke, W. E., Bao, Z., & Cui, Y. (2018) · Materials Today Nano · doi:10.1016/j.mtnano.2018.12.003 · Cited by 282
Progress in solid electrolytes toward realizing solid-state lithium batteries
Takada, K. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.003 · Cited by 281
Analysis of Diffusion in Solid-State Electrolytes through MD Simulations, Improvement of the Li-Ion Conductivity in β-Li3PS4 as an Example
de Klerk, N. J. J., van der Maas, E., & Wagemaker, M. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00457 · Cited by 286
Liquid phase therapy to solid electrolyte–electrode interface in solid-state Li metal batteries: A review
Zhao, C., Zhao, B., Yan, C., Zhang, X., Huang, J., Mo, Y., Xu, X., Li, H., & Zhang, Q. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.07.026 · Cited by 282
Challenges, interface engineering, and processing strategies toward practical sulfide‐based all‐solid‐state lithium batteries
Liang, Y., Liu, H., Wang, G., Wang, C., Ni, Y., Nan, C., & Fan, L. (2022) · InfoMat · doi:10.1002/inf2.12292 · Cited by 279
Interfacial Reactivity Benchmarking of the Sodium Ion Conductors Na 3 PS 4 and Sodium β-Alumina for Protected Sodium Metal Anodes and Sodium All-Solid-State Batteries
Wenzel, S., Leichtweiß, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10119 · Cited by 276
The interplay between thermodynamics and kinetics in the solid-state synthesis of layered oxides
Bianchini, M., Wang, J., Clément, R. J., Ouyang, B., Xiao, P., Kitchaev, D. A., Shi, T., Zhang, Y., Wang, Y. E., Kim, H., et al. (2020) · Nature Materials · doi:10.1038/s41563-020-0688-6 · Cited by 271
Self-citation
Rechargeable Alkali-Ion Battery Materials: Theory and Computation
der Ven, A. V., Deng, Z., Banerjee, S., & Ong, S. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00601 · Cited by 271
Unveiling the Stable Nature of the Solid Electrolyte Interphase between Lithium Metal and LiPON via Cryogenic Electron Microscopy
Cheng, D., Wynn, T. A., Wang, X., Wang, S., Zhang, M., Shimizu, R., Bai, S., Nguyen, H., Fang, C., Kim, M.-C., et al. (2020) · Joule · doi:10.1016/j.joule.2020.08.013 · Cited by 267
Chemo-Mechanical Challenges in Solid-State Batteries
Lewis, J. A., Tippens, J., Cortes, F. J. Q., & McDowell, M. T. (2019) · Trends in Chemistry · doi:10.1016/j.trechm.2019.06.013 · Cited by 264
Unraveling the Intra and Intercycle Interfacial Evolution of Li 6 PS 5 Cl‐Based All‐Solid‐State Lithium Batteries
Zhang, J., Zheng, C., Li, L., Xia, Y., Huang, H., Gan, Y., Liang, C., He, X., Tao, X., & Zhang, W. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201903311 · Cited by 263
Fluorine Chemistry in Rechargeable Batteries: Challenges, Progress, and Perspectives
Wang, Y., Yang, X., Meng, Y., Wen, Z., Han, R., Hu, X., Sun, B., Kang, F., Li, B., Zhou, D., et al. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00826 · Cited by 270
Self-citation
High-Throughput Screening of Solid-State Li-Ion Conductors Using Lattice-Dynamics Descriptors
Muy, S., Voss, J., Schlem, R., Koerver, R., Sedlmaier, S. J., Maglia, F., Lamp, P., Zeier, W. G., & Shao‐Horn, Y. (2019) · iScience · doi:10.1016/j.isci.2019.05.036 · Cited by 262
Polymer electrolytes and interfaces toward solid-state batteries: Recent advances and prospects
Wu, F., Zhang, K., Liu, Y., Gao, H., Bai, Y., Wang, X., & Wu, C. K. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.08.002 · Cited by 260
Characterizing Electrode Materials and Interfaces in Solid-State Batteries
Alsaç, E. P., Nelson, D. L., Yoon, S. G., Cavallaro, K. A., Wang, C., Sandoval, S. E., Eze, U. D., Jeong, W. J., & McDowell, M. T. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00584 · Cited by 268
Stress evolution during cycling of alloy-anode solid-state batteries
Han, S. Y., Lee, C., Lewis, J. A., Yeh, D. A., Liu, Y., Lee, H., & McDowell, M. T. (2021) · Joule · doi:10.1016/j.joule.2021.07.002 · Cited by 259
Battery Safety: From Lithium-Ion to Solid-State Batteries
Yu, X., Chen, R., Gan, L., Li, H., & Chen, L. (2022) · Engineering · doi:10.1016/j.eng.2022.06.022 · Cited by 259
About the Compatibility between High Voltage Spinel Cathode Materials and Solid Oxide Electrolytes as a Function of Temperature
Miara, L. J., Windmüller, A., Tsai, C., Richards, W. D., Ma, Q., Uhlenbruck, S., Guillon, O., & Ceder, G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09059 · Cited by 256
Self-citation
Influence of Carbon Additives on the Decomposition Pathways in Cathodes of Lithium Thiophosphate-Based All-Solid-State Batteries
Walther, F., Randau, S., Schneider, Y., Sann, J., Rohnke, M., Richter, F. H., Zeier, W. G., & Janek, J. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c01825 · Cited by 255
Tuning mobility and stability of lithium ion conductors based on lattice dynamics
Muy, S., Bachman, J. C., Giordano, L., Chang, H.-H., Abernathy, D. L., Bansal, D., Delaire, O. A., Hori, S., Kanno, R., Maglia, F., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03364h · Cited by 253
Recent Progress in and Perspectives on Emerging Halide Superionic Conductors for All-Solid-State Batteries
Tuo, K., Sun, C., & Liu, S. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00179-5 · Cited by 253
Materials Design Principles for Air‐Stable Lithium/Sodium Solid Electrolytes
Zhu, Y., & Mo, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202007621 · Cited by 252
Garnet-Type Fast Li-Ion Conductors with High Ionic Conductivities for All-Solid-State Batteries
Wu, J., Pang, W. K., Peterson, V. K., Wei, L., & Guo, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00614 · Cited by 250
Hybrid electrolytes for lithium metal batteries
Keller, M., Varzi, A., & Passerini, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.099 · Cited by 247
Materials design of ionic conductors for solid state batteries
Ohno, S., Banik, A., Dewald, G. F., Kraft, M. A., Krauskopf, T., Minafra, N., Till, P. S., Weiß, M., & Zeier, W. G. (2020) · Progress in Energy · doi:10.1088/2516-1083/ab73dd · Cited by 255
Experimental Assessment of the Practical Oxidative Stability of Lithium Thiophosphate Solid Electrolytes
Dewald, G. F., Ohno, S., Kraft, M. A., Koerver, R., Till, P. S., Vargas-Barbosa, N. M., Janek, J., & Zeier, W. G. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b01550 · Cited by 246
The Working Principle of a Li 2 CO 3 /LiNbO 3 Coating on NCM for Thiophosphate-Based All-Solid-State Batteries
Walther, F., Strauss, F., Wu, X., Mogwitz, B., Hertle, J., Sann, J., Rohnke, M., Brezesinski, T., & Janek, J. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c04660 · Cited by 246
Formation of self-limited, stable and conductive interfaces between garnet electrolytes and lithium anodes for reversible lithium cycling in solid-state batteries
He, M., Cui, Z., Chen, C., Li, Y., & Guo, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta02276c · Cited by 244
Lithium Metal Penetration Induced by Electrodeposition through Solid Electrolytes: Example in Single-Crystal Li6La3ZrTaO12Garnet
Swamy, T., Park, R. J.-Y., Sheldon, B. W., Rettenwander, D., Porz, L., Berendts, S., Uecker, R., Carter, W. C., & Chiang, Y. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1391814jes · Cited by 242
Dual Substitution Strategy to Enhance Li + Ionic Conductivity in Li 7 La 3 Zr 2 O 12 Solid Electrolyte
Buannic, L., Orayech, B., del Amo, J. M. L., Carrasco, J., Katcho, N. A., Aguesse, F., Manalastas, W. W., Zhang, W., Kilner, J. A., & Llordés, A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05369 · Cited by 240
A Roadmap for Solid‐State Batteries
Schmaltz, T., Hartmann, F., Wicke, T., Weymann, L., Neef, C., & Janek, J. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202301886 · Cited by 240
Recent progress and perspective on lithium metal anode protection
Yang, H., Guo, C., Naveed, A., Lei, J., Yang, J., NuLi, Y., & Wang, J. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.03.001 · Cited by 236
Interphase Morphology between a Solid-State Electrolyte and Lithium Controls Cell Failure
Lewis, J. A., Cortes, F. J. Q., Boebinger, M. G., Tippens, J., Marchese, T. S., Kondekar, N. P., Liu, X., Chi, M., & McDowell, M. T. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00093 · Cited by 236
Lithium superionic conductors with corner-sharing frameworks
Jun, K., Sun, Y., Xiao, Y., Zeng, Y., Kim, R., Kim, H., Miara, L. J., Im, D., Wang, Y., & Ceder, G. (2022) · Nature Materials · doi:10.1038/s41563-022-01222-4 · Cited by 236
Self-citation
Progress of the Interface Design in All‐Solid‐State Li–S Batteries
Yue, J., Yan, M., Yin, Y., & Guo, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707533 · Cited by 235
Li 3 BO 3 –Li 2 CO 3 : Rationally Designed Buffering Phase for Sulfide All-Solid-State Li-Ion Batteries
Jung, S. H., Oh, K., Nam, Y. J., Oh, D. Y., Brüner, P., Kang, K., & Jung, Y. S. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03321 · Cited by 235
Characterization of mechanical degradation in an all-solid-state battery cathode
Shi, T., Zhang, Y., Tu, Q. H., Wang, Y., Scott, M. C., & Ceder, G. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta06985j · Cited by 235
Self-citation
Towards rational mechanical design of inorganic solid electrolytes for all-solid-state lithium ion batteries
Ke, X., Wang, Y., Ren, G., & Yuan, C. Y. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.08.029 · Cited by 234
Self-citation
Single-ion conducting gel polymer electrolytes: design, preparation and application
Deng, K., Zeng, Q., Wang, D., Liu, Z., Qiu, Z., Zhang, Y., Xiao, M., & Meng, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta11178f · Cited by 232
Atomic/molecular layer deposition for energy storage and conversion
Zhao, Y., Zhang, L., Liu, J., Adair, K. R., Zhao, F., Sun, Y., Wu, T., Bi, X., Amine, K., Lu, J. B., et al. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00156b · Cited by 230
Role of Interfaces in Solid‐State Batteries
Miao, X., Guan, S., Ma, C., Li, L., & Nan, C. (2022) · Advanced Materials · doi:10.1002/adma.202206402 · Cited by 229
Interfacial Issues and Modification of Solid Electrolyte Interphase for Li Metal Anode in Liquid and Solid Electrolytes
Chae, O. B., & Lucht, B. L. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202203791 · Cited by 224
A review of structural properties and synthesis methods of solid electrolyte materials in the Li2S − P2S5 binary system
Kudu, Ö. U., Famprikis, T., Fleutot, B., Braida, M., Mercier, T. L., Islam, M. S., & Masquelier, C. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.10.037 · Cited by 223
Review of computational approaches to predict the thermodynamic stability of inorganic solids
Bartel, C. J. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-06915-4 · Cited by 233
Revealing Nanoscale Solid–Solid Interfacial Phenomena for Long-Life and High-Energy All-Solid-State Batteries
Banerjee, A., Tang, H., Wang, X., Cheng, J., Nguyen, H., Zhang, M., Tan, D. H. S., Wynn, T. A., Wu, E. A., Doux, J., et al. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b13955 · Cited by 220
Structural Insights and 3D Diffusion Pathways within the Lithium Superionic Conductor Li10GeP2S12
Weber, D. A., Senyshyn, A., Weldert, K. S., Wenzel, S., Zhang, W., Kaiser, R., Berendts, S., Janek, J., & Zeier, W. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02424 · Cited by 219
A comprehensive review of solid-state batteries
Joshi, A., Mishra, D. K., Singh, R. K., Zhang, J., & Ding, Y. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.125546 · Cited by 219
An Ultrastrong Double-Layer Nanodiamond Interface for Stable Lithium Metal Anodes
Liu, Y., Tzeng, Y., Lin, D., Pei, A., Lu, H., Melosh, N. A., Shen, Z., Chu, S., & Cui, Y. (2018) · Joule · doi:10.1016/j.joule.2018.05.007 · Cited by 218
Advancements and Challenges in Organic–Inorganic Composite Solid Electrolytes for All-Solid-State Lithium Batteries
Zhang, X., Cheng, S., Fu, C., Yin, G., Wang, L., Wu, Y., & Huo, H. (2024) · Nano-Micro Letters · doi:10.1007/s40820-024-01498-y · Cited by 218
All-in-one improvement toward Li6PS5Br-Based solid electrolytes triggered by compositional tune
Zhang, Z., Zhang, L., Yan, X., Wang, H., Liu, Y., Yu, C., Cao, X., van Eijck, L., & Wen, B. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.11.016 · Cited by 216
Probing Solid–Solid Interfacial Reactions in All-Solid-State Sodium-Ion Batteries with First-Principles Calculations
Tang, H., Deng, Z., Lin, Z., Wang, Z., Chu, I., Chen, C., Zhu, Z., Zheng, C., & Ong, S. P. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b04096 · Cited by 215
Realizing high-capacity all-solid-state lithium-sulfur batteries using a low-density inorganic solid-state electrolyte
Wang, D., Jhang, L.-J., Kou, R., Liao, M., Zheng, S., Jiang, H., Shi, P., Li, G.-X., Meng, K., & Wang, D. (2023) · Nature Communications · doi:10.1038/s41467-023-37564-z · Cited by 215
Understanding the Electrochemical Stability Window of Polymer Electrolytes in Solid-State Batteries from Atomic-Scale Modeling: The Role of Li-Ion Salts
Marchiori, C. F. N., de Carvalho, R. P., Ebadi, M., Brandell, D., & Araujo, C. M. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c01489 · Cited by 213
In Situ Neutron Depth Profiling of Lithium Metal–Garnet Interfaces for Solid State Batteries
Wang, C., Gong, Y., Dai, J., Zhang, L., Xie, H., Pastel, G., Liu, B., Wachsman, E. D., Wang, H., & Hu, L. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07904 · Cited by 212
Lithium Ytterbium-Based Halide Solid Electrolytes for High Voltage All-Solid-State Batteries
Kim, S. Y., Kaup, K., Park, K. H., Assoud, A., Zhou, L., Liu, J., Wu, X., & Nazar, L. F. (2021) · ACS Materials Letters · doi:10.1021/acsmaterialslett.1c00142 · Cited by 212
Structural and Electronic-State Changes of a Sulfide Solid Electrolyte during the Li Deinsertion–Insertion Processes
Hakari, T., Deguchi, M., Mitsuhara, K., Ohta, T., Saito, K., Orikasa, Y., Uchimoto, Y., Kowada, Y., Hayashi, A., & Tatsumisago, M. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00551 · Cited by 209
Tailored Li 2 S–P 2 S 5 glass-ceramic electrolyte by MoS 2 doping, possessing high ionic conductivity for all-solid-state lithium-sulfur batteries
Xu, R.-C., Xia, X., Wang, X.-L., Xia, Y., & Tu, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta10142a · Cited by 206
A low ride on processing temperature for fast lithium conduction in garnet solid-state battery films
Pfenninger, R., Struzik, M., Garbayo, Í., Stilp, E., & Rupp, J. L. M. (2019) · Nature Energy · doi:10.1038/s41560-019-0384-4 · Cited by 206
Air Stability of Solid-State Sulfide Batteries and Electrolytes
Lu, P., Wu, D., Chen, L., Li, H., & Wu, F. (2022) · Electrochemical Energy Reviews · doi:10.1007/s41918-022-00149-3 · Cited by 206
Single crystal cathodes enabling high-performance all-solid-state lithium-ion batteries
Wang, C., Yu, R., Hwang, S., Liang, J., Li, X., Zhao, C., Sun, Y., Wang, J., Holmes, N. G., Li, R., et al. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.05.007 · Cited by 204
A review of the recent progress in battery informatics
Ling, C. (2022) · npj Computational Materials · doi:10.1038/s41524-022-00713-x · Cited by 215
Data‐Driven Materials Innovation and Applications
Wang, Z., Sun, Z., Yin, H., Liu, X., Wang, J., Zhao, H., Pang, C. H., Wu, T., Li, S., Yin, Z., et al. (2022) · Advanced Materials · doi:10.1002/adma.202104113 · Cited by 204
Opportunities for Rechargeable Solid-State Batteries Based on Li-Intercalation Cathodes
Júdez, X., Eshetu, G. G., Li, C., Rodrı́guez-Martı́nez, L. M., Zhang, H., & Armand, M. B. (2018) · Joule · doi:10.1016/j.joule.2018.09.008 · Cited by 199
Interface engineering of inorganic solid-state electrolytes for high-performance lithium metal batteries
Miao, X., Wang, H., Sun, R., Wang, C., Zhang, Z., Li, Z., & Yin, L. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01435d · Cited by 198
PyCDT: A Python toolkit for modeling point defects in semiconductors and insulators
Broberg, D., Medasani, B., Zimmermann, N., Yu, G., Canning, A., Harańczyk, M., Asta, M., & Hautier, G. (2018) · Computer Physics Communications · doi:10.1016/j.cpc.2018.01.004 · Cited by 196
High‐Entropy Lithium Argyrodite Solid Electrolytes Enabling Stable All‐Solid‐State Batteries
Li, S., Lin, J. C., Schaller, M., Indris, S., Zhang, X. Q., Brezesinski, T., Nan, C., Wang, S., & Strauss, F. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202314155 · Cited by 204
Material Design Strategy for Halide Solid Electrolytes Li 3 MX 6 (X = Cl, Br, and I) for All-Solid-State High-Voltage Li-Ion Batteries
Kim, K., Park, D., Jung, H., Chung, K. Y., Shim, J. H., Wood, B. C., & Yu, S. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.1c00555 · Cited by 195
Progress and prospect on failure mechanisms of solid-state lithium batteries
Ma, J., Chen, B., Wang, L., & Cui, G. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.055 · Cited by 194
Structure, Chemistry, and Charge Transfer Resistance of the Interface between Li 7 La 3 Zr 2 O 12 Electrolyte and LiCoO 2 Cathode
Vardar, G., Bowman, W. J., Lu, Q., Wang, J., Chater, R. J., Aguadero, A., Seibert, R. L., Terry, J., Hunt, A. H., Waluyo, I., et al. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01713 · Cited by 192

Authors: Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G.
Affiliations: Massachusetts Institute of Technology (US)
Samsung Advanced Institute of Technology - USA , 255 Main Street, Suite 702 , , ,
Lawrence Berkeley National Laboratory (US)
Corresponding author: Ceder, Gerbrand
ORCID: Richards, William D.
Miara, Lincoln J.
Wang, Yan
Kim, Jae Chul
Ceder, Gerbrand
Venue: Chemistry of Materials
Publisher: American Chemical Society (ACS)
Published: 2015-12-07
Volume: 28
Issue: 1
Pages: 266-273
ISSN: 0897-4756 (ISSN-L)
1520-5002
DOI: 10.1021/acs.chemmater.5b04082
OpenAlex: W2237868774
Cited by: 1,652
References: 60
Citations by year: 2026: 156 · 2025: 188 · 2024: 181 · 2023: 199 · 2022: 204 · 2021: 196 · 2020: 173 · 2019: 141 · 2018: 112 · 2017: 74 · 2016: 28
FWCI: 33.24
Type: journal article
Language: en
Open access: hybrid
doi.org
Licence: other-oa
pubs.acs.org/page/policy/authorchoice_termsofuse.html (vor, 11 d)
Locations: Chemistry of Materials (publishedVersion, other-oa)
DSpace@MIT (Massachusetts Institute of Technology) (submittedVersion, cc-by-nc)
Funders: Samsung (NA)
Topics: Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
Physical Sciences › Materials Science › Materials Chemistry › Thermal Expansion and Ionic Conductivity
Keywords: solid-state batteries, solid electrolytes, interfacial resistance, interfacial stability, interfacial phase formation, high-voltage cathodes, electrochemical stability window, electrolyte decomposition products, lithium-ion batteries

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Interface Stability in Solid-State Batteries

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks