Cited by 1,652Advanced Battery Materials and TechnologiesAdvancements in Battery MaterialsThermal Expansion and Ionic Conductivity

The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.

Interface Stability in Solid-State Batteries

Open access

Richards, William D., Miara, Lincoln J., Wang, Yan, Kim, Jae Chul, Ceder, Gerbrand·2016·Chemistry of Materials

DOI 10.1021/acs.chemmater.5b04082

Open this paper in CoChat — free account

Abstract

Development of high conductivity solid-state electrolytes for lithium ion batteries has proceeded rapidly in recent years, but incorporating these new materials into high-performing batteries has proven difficult. Interfacial resistance is now the limiting factor in many systems, but the exact mechanisms of this resistance have not been fully explained - in part because experimental evaluation of the interface can be very difficult. In this work, we develop a computational methodology to examine the thermodynamics of formation of resistive interfacial phases. The predicted interfacial phase formation is well correlated with experimental interfacial observations and battery performance. We calculate that thiophosphate electrolytes have especially high reactivity with high voltage cathodes and a narrow electrochemical stability window. We also find that a number of known electrolytes are not inherently stable but react in situ with the electrode to form passivating but ionically conducting barrier layers. As a reference for experimentalists, we tabulate the stability and expected decomposition products for a wide range of electrolyte, coating, and electrode materials including a number of high-performing combinations that have not yet been attempted experimentally.

Integrity signals

Registry

Crossref · 10.1021/acs.chemmater.5b04082

Cites

60 of 60 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Electron-energy-loss spectra and the structural stability of nickel oxide: An LSDA+U study
Dudarev, S. L., Botton, G. A., Savrasov, S. Y., Humphreys, C. J., & Sutton, A. P. (1998) · Physical review. B, Condensed matter · doi:10.1103/physrevb.57.1505 · Cited by 15,260
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Self-citation
Band theory and Mott insulators: Hubbard U instead of Stoner I
Anisimov, V. I., Zaanen, J., & Andersen, O. K. (1991) · Physical review. B, Condensed matter · doi:10.1103/physrevb.44.943 · Cited by 7,492
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,997
Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis
Ong, S. P., Richards, W. D., Jain, A., Hautier, G., Kocher, M., Cholia, S., Gunter, D., Chevrier, V. L., Persson, K. A., & Ceder, G. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2012.10.028 · Cited by 4,534
Self-citation
NIST-JANAF Thermochemical Tables
Chase, M. W. (1998) · Medical Entomology and Zoology · Cited by 3,312
Fast Lithium Ion Conduction in Garnet‐Type Li 7 La 3 Zr 2 O 12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,304

Flagged first, then by citations

Show all 60 references

Research works printed but not linked: 1

Kubaschewski, 1993, Materials Thermochemistry

Sorted by citations

Items 501–600 of 1,000

On the Balance of Intercalation and Conversion Reactions in Battery Cathodes
Hannah, D. C., Gautam, G. S., Canepa, P., & Ceder, G. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800379 · Cited by 72
Self-citation
An effective LiBO2 coating to ameliorate the cathode/electrolyte interfacial issues of LiNi0.6Co0.2Mn0.2O2 in solid-state Li batteries
Zhang, X., Shi, J., Liang, J., Wang, L., Yin, Y., Jiang, K., & Guo, Y. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.04.017 · Cited by 72
Kinetic Pathways Templated by Low-Temperature Intermediates during Solid-State Synthesis of Layered Oxides
Bai, J., Sun, W. Q., Zhao, J., Wang, D., Xiao, P., Ko, J. Y. P., Huq, A., Ceder, G., & Wang, F. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02568 · Cited by 71
Self-citation
All-Solid-State Thin Film Li-Ion Batteries: New Challenges, New Materials, and New Designs
Wu, B., Chen, C., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2023) · Batteries · doi:10.3390/batteries9030186 · Cited by 71
Consolidating the grain boundary of the garnet electrolyte LLZTO with Li 3 BO 3 for high-performance LiNi 0.8 Co 0.1 Mn 0.1 O 2 /LiFePO 4 hybrid solid batteries
Xie, H., Li, C., Kan, W. H., Avdeev, M., Zhu, C., Zhao, Z., Chu, X., Mu, D., & Wu, F. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta03263k · Cited by 70
Review of Computational Studies of NCM Cathode Materials for Li‐ion Batteries
Chakraborty, A., Kunnikuruvan, S., Dixit, M., & Major, D. T. (2020) · Israel Journal of Chemistry · doi:10.1002/ijch.201900116 · Cited by 70
Recent progress in constructing halogenated interfaces for highly stable lithium metal anodes
Wang, Y., Liang, J., Song, X., & Jin, Z. (2022) · Energy storage materials · doi:10.1016/j.ensm.2022.10.054 · Cited by 70
Self-citation
Fundamental chemical and physical properties of electrolytes in energy storage devices: A review
Tiwari, R., Kumar, D., Verma, D. K., Parwati, K., Ranjan, P., Rai, R., Krishnamoorthi, S., & Khan, R. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110361 · Cited by 70
Fast Ionic Conductivity in the Most Lithium-Rich Phosphidosilicate Li14SiP6
Strangmüller, S., Eickhoff, H., Müller, D. C., Klein, W., Raudaschl‐Sieber, G., Kirchhain, H., Sedlmeier, C., Baran, V. V., Senyshyn, A., Deringer, V. L., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b05301 · Cited by 70
Current understanding and applications of the cold sintering process
Yu, T., Cheng, J., Li, L., Sun, B., Bao, X., & Zhang, H. (2019) · Frontiers of Chemical Science and Engineering · doi:10.1007/s11705-019-1832-1 · Cited by 69
Impedance Analysis of NCM Cathode Materials: Electronic and Ionic Partial Conductivities and the Influence of Microstructure
Zahnow, J., Bernges, T., Wagner, A. C., Bohn, N., Binder, J. R., Zeier, W. G., Elm, M. T., & Janek, J. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c02606 · Cited by 69
Review on Interface and Interphase Issues in Sulfide Solid-State Electrolytes for All-Solid-State Li-Metal Batteries
Byeon, Y., & Kim, H. (2021) · Electrochem · doi:10.3390/electrochem2030030 · Cited by 69
Stable Cycling of All‐Solid‐State Batteries with Sacrificial Cathode and Lithium‐Free Indium Layer
Park, S. W., Choi, H. J., Yoo, Y., Lim, H., Park, J., Lee, Y., Ha, Y., Lee, S., & Kim, B. G. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202108203 · Cited by 69
Interfacial Challenges, processing strategies, and composite applications for high voltage all-solid-state lithium batteries based on halide and sulfide solid-state electrolytes
Liu, F., Gao, L., Zhang, Z., Zhang, L., Deng, N., Zhao, Y., & Kang, W. (2023) · Energy storage materials · doi:10.1016/j.ensm.2023.103072 · Cited by 69
Lithium Superionic Conductor Li9.42Si1.02P2.1S9.96O2.04 with Li10GeP2S12-Type Structure in the Li2S–P2S5–SiO2 Pseudoternary System: Synthesis, Electrochemical Properties, and Structure–Composition Relationships
Hori, S., Suzuki, K., Hirayama, M., Kato, Y., & Kanno, R. (2016) · Frontiers in Energy Research · doi:10.3389/fenrg.2016.00038 · Cited by 69
Influence of Chloride Ion Substitution on Lithium-Ion Conductivity and Electrochemical Stability in a Dual-Halogen Solid-State Electrolyte
Umeshbabu, E., Maddukuri, S., Hu, Y., Fichtner, M., & Reddy, M. A. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c04160 · Cited by 68
Engineering, Understanding, and Optimizing Electrolyte/Anode Interfaces for All-Solid-State Sodium Batteries
Tang, W., Qi, R., Wu, J., Zuo, Y., Shi, Y., Liu, R., Wei, Y., & Zhang, J. (2024) · Electrochemical Energy Reviews · doi:10.1007/s41918-024-00228-7 · Cited by 68
Solid Polymer Electrolytes with Excellent High-Temperature Properties Based on Brush Block Copolymers Having Rigid Side Chains
Jing, P., Pan, H., Hou, P., Zhang, M., Wang, X., Wang, C., Chen, J., Wu, D., Shen, Z., & Fan, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15893 · Cited by 68
Recent Developments of All‐Solid‐State Lithium Secondary Batteries with Sulfide Inorganic Electrolytes
Xu, R., Zhang, S., Wang, X., Xia, Y., Xia, X., Wu, J., Gu, C., & Tu, J. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201704568 · Cited by 68
Machine learning for the modeling of interfaces in energy storage and conversion materials
Artrith, N. (2019) · Journal of Physics Energy · doi:10.1088/2515-7655/ab2060 · Cited by 69
Nido -Borate/ Closo -Borate Mixed-Anion Electrolytes for All-Solid-State Batteries
Payandeh, S., Asakura, R., Avramidou, P., Rentsch, D., Łodziana, Z., Černý, R., Remhof, A., & Battaglia, C. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b03933 · Cited by 68
Controlling Ion Coordination Structure and Diffusion Kinetics for Optimized Electrode-Electrolyte Interphases and High-Performance Si Anodes
Jia, H., Gao, P., Zou, L., Han, K. S., Engelhard, M., He, Y., Zhang, X., Zhao, W., Yi, R., Wang, H., et al. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02954 · Cited by 67
Perspective on powder technology for all-solid-state batteries: How to pair sulfide electrolyte with high-voltage cathode
Hu, J., Yang, S., Pei, Y., Wang, X., Liao, Y., Li, S., Yue, A.-L., Huang, J., & Yuan, H. (2023) · Particuology · doi:10.1016/j.partic.2023.04.005 · Cited by 67
Lithium-compatible and air-stable vacancy-rich Li 9 N 2 Cl 3 for high–areal capacity, long-cycling all–solid-state lithium metal batteries
Li, W. S., Li, M., Chien, P., Wang, S., Yu, C., King, G., Hu, Y., Xiao, Q., Shakouri, M., Feng, R., et al. (2023) · Science Advances · doi:10.1126/sciadv.adh4626 · Cited by 67
Eliminating chemo-mechanical degradation of lithium solid-state battery cathodes during >4.5 V cycling using amorphous Nb2O5 coatings
Jangid, M. K., Cho, T. H., Ma, T., Liao, D. W., Kim, H., Kim, Y.-G., Chi, M., & Dasgupta, N. P. (2024) · Nature Communications · doi:10.1038/s41467-024-54331-w · Cited by 67
Novel SeS2 doped Li2S-P2S5 solid electrolyte with high ionic conductivity for all-solid-state lithium sulfur batteries
Wu, Z., Xie, Z., Yoshida, A., An, X., Wang, Z., Hao, X., Abudula, A., & Guan, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122419 · Cited by 67
Lithium Fluoride Coated Silicon Nanocolumns as Anodes for Lithium Ion Batteries
Lin, J., Hu, P., Kim, J., Wygant, B. R., Meyerson, M., Rodríguez, R., Liu, Y., Kawashima, K., Gu, D., Peng, D., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b23106 · Cited by 67
Self-citation
Formation of an Artificial Cathode–Electrolyte Interphase to Suppress Interfacial Degradation of Ni-Rich Cathode Active Material with Sulfide Electrolytes for Solid-State Batteries
Zuo, T., Walther, F., Ahmed, S., Rueß, R., Hertle, J., Mogwitz, B., Volz, K., & Janek, J. (2023) · ACS Energy Letters · doi:10.1021/acsenergylett.2c02835 · Cited by 66
Polymer electrolytes: evolution, challenges, and future directions for lithium-ion batteries
Ram Prasanth, S., Prasannavenkadesan, V., Katiyar, V., & Achalkumar, A. S. (2024) · RSC Applied Polymers · doi:10.1039/d4lp00325j · Cited by 66
Cell Concepts of Metal–Sulfur Batteries (Metal = Li, Na, K, Mg): Strategies for Using Sulfur in Energy Storage Applications
Medenbach, L., & Adelhelm, P. (2017) · Topics in Current Chemistry · doi:10.1007/s41061-017-0168-x · Cited by 66
Emerging applications of spark plasma sintering in all solid-state lithium-ion batteries and beyond
Zhu, H., & Liu, J. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.054 · Cited by 66
Predictive modeling and design rules for solid electrolytes
Ceder, G., Ong, S. P., & Wang, Y. E. (2018) · MRS Bulletin · doi:10.1557/mrs.2018.210 · Cited by 65
Self-citation
In Situ Ion‐Conducting Protective Layer Strategy to Stable Lithium Metal Anode for All‐Solid‐State Sulfide‐Based Lithium Metal Batteries
Wang, C., Sun, X., Li, Y., Song, D., Wu, Y., Ohsaka, T., Matsumoto, F., & Wu, J. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.202001698 · Cited by 65
Lithiation Gradients and Tortuosity Factors in Thick NMC111-Argyrodite Solid-State Cathodes
Stavola, A. M., Sun, X. H., Guida, D. P., Bruck, A. M., Cao, D., Okasinski, J., Chuang, A. C., Zhu, H., & Gallaway, J. W. (2023) · ACS Energy Letters · doi:10.1021/acsenergylett.2c02699 · Cited by 65
Large-scale manufacturing of solid-state electrolytes: Challenges, progress, and prospects
Minkiewicz, J., Jones, G. M., Ghanizadeh, S., Bostanchi, S., Wasely, T. J., Yamini, S. A., & Nekouie, V. (2023) · Open Ceramics · doi:10.1016/j.oceram.2023.100497 · Cited by 65
Operando Photoelectron Spectroscopy Analysis of Li 6 PS 5 Cl Electrochemical Decomposition Reactions in Solid-State Batteries
Aktekin, B., Kataev, E. Y., Riegger, L. M., Garcia‐Diez, R., Chalkley, Z., Becker, J., Wilks, R. G., Henß, A., Bär, M., & Janek, J. (2024) · ACS Energy Letters · doi:10.1021/acsenergylett.4c01072 · Cited by 65
Elucidating Interfacial Phenomena between Solid-State Electrolytes and the Sulfur-Cathode of Lithium–Sulfur Batteries
Camacho-Forero, L. E., & Balbuena, P. B. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b03880 · Cited by 65
Li1.5La1.5MO6 (M = W6+, Te6+) as a new series of lithium-rich double perovskites for all-solid-state lithium-ion batteries
Amores, M., El‐Shinawi, H., McClelland, I., Yeandel, S. R., Baker, P. J., Smith, R. I., Playford, H. Y., Goddard, P., Cussen, S. A., & Cussen, E. J. (2020) · Nature Communications · doi:10.1038/s41467-020-19815-5 · Cited by 64
The interplay between (electro)chemical and (chemo)mechanical effects in the cycling performance of thiophosphate-based solid-state batteries
Teo, J. H., Strauss, F., Walther, F., Ma, Y., Payandeh, S., Scherer, T., Bianchini, M., Janek, J., & Brezesinski, T. (2021) · Materials Futures · doi:10.1088/2752-5724/ac3897 · Cited by 64
Unraveling the Stable Cathode Electrolyte Interface in all Solid‐State Thin‐Film Battery Operating at 5 V
Shimizu, R., Cheng, D., Weaver, J. L., Zhang, M., Lu, B., Wynn, T. A., Burger, R., Kim, M., Zhu, G., & Meng, Y. S. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201119 · Cited by 64
A dynamic database of solid-state electrolyte (DDSE) picturing all-solid-state batteries
Yang, F., dos Santos, E. C., Jia, X., Sato, R., Kisu, K., Hashimoto, Y., Orimo, S., & Li, H. (2023) · Nano Materials Science · doi:10.1016/j.nanoms.2023.08.002 · Cited by 64
Regulation mechanism of bottleneck size on Li+ migration activation energy in garnet-type Li7La3Zr2O12
Zhang, Y., Chen, F., Li, J., Zhang, L., Gu, J., Zhang, D., Saito, K., Guo, Q., Luo, P., & Dong, S. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.12.133 · Cited by 64
Reducing the Interfacial Resistance in All‐Solid‐State Lithium Batteries Based on Oxide Ceramic Electrolytes
Jiang, Z., Han, Q., Wang, S., & Wang, H. (2019) · ChemElectroChem · doi:10.1002/celc.201801898 · Cited by 64
Building better all-solid-state batteries with Li-garnet solid electrolytes and metalloid anodes
Afyon, S., Kravchyk, K. V., Wang, S., van den Broek, J., Hänsel, C., Kovalenko, M. V., & Rupp, J. L. M. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04999a · Cited by 64
Thermally Driven Interfacial Degradation between Li7La3Zr2O12 Electrolyte and LiNi0.6Mn0.2Co0.2O2 Cathode
Kim, Y.-G., Kim, D., Bliem, R., Vardar, G., Waluyo, I., Hunt, A. H., Wright, J., Katsoudas, J. P., & Yildiz, B. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02261 · Cited by 64
Solid Electrolyte with Oxidation Tolerance Provides a High‐Capacity Li 2 S‐Based Positive Electrode for All‐Solid‐State Li/S Batteries
Hakari, T., Fujita, Y., Deguchi, M., Kawasaki, Y., Otoyama, M., Yoneda, Y., Sakuda, A., Tatsumisago, M., & Hayashi, A. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106174 · Cited by 63
Computational Investigation of the Interfacial Stability of Lithium Chloride Solid Electrolytes in All-Solid-State Lithium Batteries
Chun, G. H., Shim, J. H., & Yu, S. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c22104 · Cited by 63
Recent Advances in Stability Issues of Inorganic Solid Electrolytes and Composite Solid Electrolytes for All‐Solid‐State Batteries
Liu, Q., Jiang, L., Zheng, P., Sun, J., Liu, C., Chai, J., Li, X., Zheng, Y., & Liu, Z. (2022) · The Chemical Record · doi:10.1002/tcr.202200116 · Cited by 63
Electro‐Chemo‐Mechanical Degradation in Solid‐State Batteries: A Review of Microscale and Multiphysics Modeling
Gol, A. D., Dermenci, K. B., Farkas, L., & Berecibar, M. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202403255 · Cited by 63
High efficiency aqueous and hybrid lithium-air batteries enabled by Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 ceramic anode-protecting membranes
Safanama, D., & Adams, S. N. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.076 · Cited by 63
Evaluation of Mg Compounds as Coating Materials in Mg Batteries
Chen, T., Ceder, G., Gautam, G. S., & Canepa, P. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00024 · Cited by 63
Self-citation
Theoretical picture of positive electrode–solid electrolyte interface in all-solid-state battery from electrochemistry and semiconductor physics viewpoints
Tateyama, Y., Gao, B., Jalem, R., & Haruyama, J. (2019) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2019.06.003 · Cited by 63
Interphases, Interfaces, and Surfaces of Active Materials in Rechargeable Batteries and Perovskite Solar Cells
Liu, C., Yuan, J., Masse, R., Jia, X., Bi, W., Neale, Z. G., Shen, T., Xu, M., Tian, M., Zheng, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.201905245 · Cited by 63
The resistive nature of decomposing interfaces of solid electrolytes with alkali metal electrodes
Wang, J., Panchal, A. A., Gautam, G. S., & Canepa, P. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta02202h · Cited by 62
Maximizing interface stability in all-solid-state lithium batteries through entropy stabilization and fast kinetics
Kong, X., Gu, R., Jin, Z., Zhang, L., Zhang, C., Xiang, W., Li, C., Zhu, K., Xu, Y., Huang, H., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-51123-0 · Cited by 62
Atomistic Insight into Ion Transport and Conductivity in Ga/Al-Substituted Li7La3Zr2O12 Solid Electrolytes
Daza, F. A. G., Bonilla, M. R., Llordés, A., Carrasco, J., & Akhmatskaya, E. V. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17217 · Cited by 62
Metal-organic frameworks containing solid-state electrolytes for lithium metal batteries and beyond
Chen, T., Chen, S., Chen, Y., Zhao, M., Lošić, D., & Zhang, S. (2020) · Materials Chemistry Frontiers · doi:10.1039/d0qm00856g · Cited by 62
Visualizing Lithium Distribution and Degradation of Composite Electrodes in Sulfide-based All-Solid-State Batteries Using Operando Time-of-Flight Secondary Ion Mass Spectrometry
Yamagishi, Y., Morita, H., Nomura, Y., & Igaki, E. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18505 · Cited by 62
Mechanochemical Synthesis and Structure of Lithium Tetrahaloaluminates, LiAlX 4 (X = Cl, Br, I): A Family of Li-Ion Conducting Ternary Halides
Flores-González, N. A., Minafra, N., Dewald, G. F., Reardon, H., Smith, R. I., Adams, S. N., Zeier, W. G., & Gregory, D. H. (2021) · ACS Materials Letters · doi:10.1021/acsmaterialslett.1c00055 · Cited by 61
Slurry-Coated LiNi0.8Co0.1Mn0.1O2–Li3InCl6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries
Ye, Q., Li, X., Zhang, W., Xia, Y., He, X., Huang, H., Gan, Y., Xia, X., & Zhang, J. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c00178 · Cited by 61
Research Progress on Solid-State Electrolytes in Solid-State Lithium Batteries: Classification, Ionic Conductive Mechanism, Interfacial Challenges
Ai, S., Wu, X., Wang, J., Li, X., Hao, X., & Meng, Y. (2024) · Nanomaterials · doi:10.3390/nano14221773 · Cited by 61
Enhancement of Superionic Conductivity by Halide Substitution in Strongly Stacking Faulted Li3HoBr6–xIx Phases
Plaß, M. A., Bette, S., Dinnebier, R. E., & Lotsch, B. V. (2022) · Chemistry of Materials · doi:10.1021/acs.chemmater.2c00024 · Cited by 60
Li-ion conductivity in Li 2 OHCl 1− x Br x solid electrolytes: grains, grain boundaries and interfaces
Lee, H. J., Darminto, B., Narayanan, S., Diaz‐Lopez, M., Xiao, A. W., Chart, Y. A., Lee, J. H., Dawson, J. A., & Pasta, M. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta01462a · Cited by 60
Enable high reversibility of Fe/Cu based fluoride conversion batteries via interfacial gas release and detergency of garnet electrolytes
Liu, Y., Lei, M., Lai, C., Meng, J., Wu, X., Yu, Y., Zhang, Y., & Li, C. (2022) · Materials Today · doi:10.1016/j.mattod.2022.10.019 · Cited by 60
Advances in sulfide solid–state electrolytes for lithium batteries
Yao, M., Shi, J., 罗案宏, Zhang, Z., Zhu, G., Xu, H., Xu, J., Li, J., & Jiang, K. (2025) · Energy storage materials · doi:10.1016/j.ensm.2025.104018 · Cited by 60
Preparation and characterization of glass solid electrolytes in the pseudoternary system Li 3 BO 3 -Li 2 SO 4 -Li 2 CO 3
Nagao, K., Nose, M., Kato, A., Sakuda, A., Hayashi, A., & Tatsumisago, M. (2017) · Solid State Ionics · doi:10.1016/j.ssi.2017.05.009 · Cited by 60
Solid–Liquid Lithium Electrolyte Nanocomposites Derived from Porous Molecular Cages
Petronico, A., Moneypenny, T. P., Nicolau, B. G., Moore, J. S., Nuzzo, R. G., & Gewirth, A. A. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b00886 · Cited by 60
The effects of mechanical constriction on the operation of sulfide based solid-state batteries
Fitzhugh, W., Ye, L., & Li, X. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05248h · Cited by 60
High Li+ and Na+ Conductivity in New Hybrid Solid Electrolytes based on the Porous MIL‐121 Metal Organic Framework
Zettl, R., Lunghammer, S., Gadermaier, B., Boulaoued, A., Johansson, P., Wilkening, M., & Hanzu, I. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003542 · Cited by 60
Lithium Chlorides and Bromides as Promising Solid‐State Chemistries for Fast Ion Conductors with Good Electrochemical Stability
Wang, S., Bai, Q., Nolan, A. M., Liu, Y., Gong, S., Sun, Q., & Mo, Y. (2019) · Angewandte Chemie · doi:10.1002/ange.201901938 · Cited by 60
Porous Mixed Ionic Electronic Conductor Interlayers for Solid-State Batteries
Kim, S. Y., & Li, J. (2021) · Energy Material Advances · doi:10.34133/2021/1519569 · Cited by 59
Li-rich channels as the material gene for facile lithium diffusion in halide solid electrolytes
Yang, G., Liang, X., Zheng, S., Chen, H., Zhang, W., Li, S., & Pan, F. (2022) · eScience · doi:10.1016/j.esci.2022.01.001 · Cited by 59
Lithium metal batteries with all-solid/full-liquid configurations
Xie, H., Feng, J., & Zhao, H. (2023) · Energy storage materials · doi:10.1016/j.ensm.2023.102918 · Cited by 59
Carbothermal shock enabled functional nanomaterials for energy-related applications
Zhang, W., Wei, X., Wu, T., Wei, F., Ma, L., Lv, Y., Zhou, W., & Liu, H. (2023) · Nano Energy · doi:10.1016/j.nanoen.2023.108994 · Cited by 59
Recent progress in SEI engineering for boosting Li metal anodes
Wu, Y., Wang, C., Wang, C., Zhang, Y., Liu, J., Jin, Y., Wang, H., & Zhang, Q. (2023) · Materials Horizons · doi:10.1039/d3mh01434g · Cited by 59
Exploration of crystal chemical space using text-guided generative artificial intelligence
Park, H., Onwuli, A., & Walsh, A. (2025) · Nature Communications · doi:10.1038/s41467-025-59636-y · Cited by 59
On the chemistry and electrochemistry of LiPON breakdown
Put, B., Vereecken, P. M., & Stesmans, A. L. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta07928a · Cited by 59
Toward Electrochemical Studies on the Nanometer and Atomic Scales: Progress, Challenges, and Opportunities
Kalinin, S. V., Dyck, O., Balke, N., Neumayer, S. M., Tsai, W., Vasudevan, R. K., Lingerfelt, D. B., Ahmadi, M., Ziatdinov, M. A., McDowell, M. T., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b02687 · Cited by 58
Aluminum-Assisted Densification of Cosputtered Lithium Garnet Electrolyte Films for Solid-State Batteries
Sastre, J., Lin, T., Filippin, A. N., Priebe, A., Avancini, E., Michler, J., Tiwari, A. N., Romanyuk, Y. E., & Buecheler, S. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01387 · Cited by 58
First-Principles Study of Microscopic Electrochemistry at the LiCoO 2 Cathode/LiNbO 3 Coating/β-Li 3 PS 4 Solid Electrolyte Interfaces in an All-Solid-State Battery
Gao, B., Jalem, R., & Tateyama, Y. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c19091 · Cited by 58
Nitride solid-state electrolytes for all-solid-state lithium metal batteries
Li, W., Li, M., Ren, H., Kim, J. T., Li, R., Sham, T., & Sun, X. A. (2025) · Energy & Environmental Science · doi:10.1039/d4ee04927f · Cited by 58
Self-citation
Digital Printing of Solid‐State Lithium‐Ion Batteries
Deiner, L. J., Bezerra, C. A. G., Howell, T. G., & Powell, A. S. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900737 · Cited by 58
Developing practical solid-state rechargeable Li-ion batteries: Concepts, challenges, and improvement strategies
Mageto, T., Bhoyate, S. D., de Souza, F. M., Mensah‐Darkwa, K., Kumar, A., & Gupta, R. K. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105688 · Cited by 57
Ionic Transport through the Solid Electrolyte Interphase in Lithium-Ion Batteries: A Review from First-Principles Perspectives
Kulathuvayal, A. S., & Su, Y. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.3c00287 · Cited by 57
Fabrication of Sub‐Micrometer‐Thick Solid Electrolyte Membranes of β‐Li3PS4 via Tiled Assembly of Nanoscale, Plate‐Like Building Blocks
Hood, Z. D., Wang, H., Pandian, A. S., Peng, R., Gilroy, K. D., Chi, M., Liang, C., & Younan Xia, A. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800014 · Cited by 57
Toward Higher Voltage Solid‐State Batteries by Metastability and Kinetic Stability Design
Ye, L., Fitzhugh, W., Gil‐González, E., Wang, Y., Su, Y., Su, H., Qiao, T., Ma, L., Zhou, H., Hu, E., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001569 · Cited by 57
Self-citation
Flame-retardant single-ion conducting polymer electrolytes based on anion acceptors for high-safety lithium metal batteries
Deng, K., Guan, T., Liang, F., Zheng, X., Zeng, Q., Liu, Z., Wang, G., Qiu, Z., Zhang, Y., Xiao, M., et al. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta12437k · Cited by 57
Coupling novel Li 7 TaO 6 surface buffering with bulk Ta-doping to achieve long-life sulfide-based all-solid-state lithium batteries
Shi, J., Ma, Z., Han, K., Wan, Q., Wu, D., Qu, X., & Li, P. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta06703j · Cited by 56
Fluorinated Strategies Among All‐Solid‐State Lithium Metal Batteries from Microperspective
Yang, F., Liu, Y., Liu, T., Wang, Y., Nai, J., Lin, Z., Xu, H., Duan, D., Yue, K., & Tao, X. (2022) · Small Structures · doi:10.1002/sstr.202200122 · Cited by 56
Self-citation
Advances in sulfide-based all-solid-state lithium-sulfur battery: Materials, composite electrodes and electrochemo-mechanical effects
Gu, J., Zhong, H., Chen, Z., Shi, J., Gong, Z., & Yang, Y. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.139923 · Cited by 56
Comparative Advances in Sulfide and Halide Electrolytes for Commercialization of All‐Solid‐State Lithium Batteries
Bouguern, M. D., Ningappa, N. G., Vishweswariah, K., R, A. K. M., Kanno, R., & Zaghib, K. (2025) · Advanced Materials · doi:10.1002/adma.202513255 · Cited by 56
Rotational motion of polyanion versus volume effect associated with ionic conductivity of several solid electrolytes
Zhao, Q., Li, P., Li, Y., Chen, L., & Shi, S. (2018) · Rare Metals · doi:10.1007/s12598-018-1058-2 · Cited by 59
Beneficial redox activity of halide solid electrolytes empowering high-performance anodes in all-solid-state batteries
Cheng, Z., Zhao, W.-X., Wang, Q., Zhao, C., Lavrinenko, A. K., Vasileiadis, A., Landgraf, V., Bannenberg, L. J., Li, Y., Liang, J., et al. (2025) · Nature Materials · doi:10.1038/s41563-025-02296-6 · Cited by 55
An ion-conductive Li1.5Al0.5Ge1.5(PO4)3-based composite protective layer for lithium metal anode in lithium-sulfur batteries
Sun, C., Huang, X., Jin, J. H., Lu, Y., Wang, Q., Yang, J., & Wen, Z. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.063 · Cited by 55
Effect of introducing interlayers into electrode/electrolyte interface in all-solid-state battery using sulfide electrolyte
Chen, K., Yamamoto, K., Orikasa, Y., Uchiyama, T., Ito, Y., Yubuchi, S., Hayashi, A., Tatsumisago, M., Nitta, K., Uruga, T., et al. (2018) · Solid State Ionics · doi:10.1016/j.ssi.2018.10.010 · Cited by 55
Advances in Materials Design for All-Solid-state Batteries: From Bulk to Thin Films
Yang, G. J., Abraham, C. G., Ma, Y., Lee, M., Helfrick, E., Oh, D., & Lee, D. (2020) · Applied Sciences · doi:10.3390/app10144727 · Cited by 55
Discovering a New class of fluoride solid-electrolyte materials via screening the structural property of Li-ion sublattice
Zhang, B., Zhong, J., Zhang, Y., Yang, L., Yang, J., Li, S., Wang, L., Pan, F., & Lin, Z. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105407 · Cited by 55
Promising Electrode and Electrolyte Materials for High‐Energy‐Density Thin‐Film Lithium Batteries
Lin, J., Lin, L., Qu, S., Deng, D., Wu, Y., Yan, X., Xie, Q., Wang, L., & Peng, D. (2021) · Energy & environment materials · doi:10.1002/eem2.12202 · Cited by 55
Ab Initio Study of the Defect Chemistry and Substitutional Strategies for Highly Conductive Li3YX6 (X = F, Cl, Br, and I) Electrolyte for the Application of Solid-State Batteries
Wan, T. H., & Francesco Ciucci, A. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c01262 · Cited by 54
Tuned Reactivity at the Lithium Metal–Argyrodite Solid State Electrolyte Interphase
Hao, H., Liu, Y., Greene, S. M., Yang, G. H., Naik, K. G., Vishnugopi, B. S., Wang, Y., Celio, H., Dolocan, A., Tsai, W., et al. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202301338 · Cited by 54
Self-citation

Authors: Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G.
Affiliations: Massachusetts Institute of Technology (US)
Samsung Advanced Institute of Technology - USA , 255 Main Street, Suite 702 , , ,
Lawrence Berkeley National Laboratory (US)
Corresponding author: Ceder, Gerbrand
ORCID: Richards, William D.
Miara, Lincoln J.
Wang, Yan
Kim, Jae Chul
Ceder, Gerbrand
Venue: Chemistry of Materials
Publisher: American Chemical Society (ACS)
Published: 2015-12-07
Volume: 28
Issue: 1
Pages: 266-273
ISSN: 0897-4756 (ISSN-L)
1520-5002
DOI: 10.1021/acs.chemmater.5b04082
OpenAlex: W2237868774
Cited by: 1,652
References: 60
Citations by year: 2026: 156 · 2025: 188 · 2024: 181 · 2023: 199 · 2022: 204 · 2021: 196 · 2020: 173 · 2019: 141 · 2018: 112 · 2017: 74 · 2016: 28
FWCI: 33.24
Type: journal article
Language: en
Open access: hybrid
doi.org
Licence: other-oa
pubs.acs.org/page/policy/authorchoice_termsofuse.html (vor, 11 d)
Locations: Chemistry of Materials (publishedVersion, other-oa)
DSpace@MIT (Massachusetts Institute of Technology) (submittedVersion, cc-by-nc)
Funders: Samsung (NA)
Topics: Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
Physical Sciences › Materials Science › Materials Chemistry › Thermal Expansion and Ionic Conductivity
Keywords: solid-state batteries, solid electrolytes, interfacial resistance, interfacial stability, interfacial phase formation, high-voltage cathodes, electrochemical stability window, electrolyte decomposition products, lithium-ion batteries

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Interface Stability in Solid-State Batteries

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks