The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Stabilizing Perovskite Structures by Tuning Tolerance Factor: Formation of Formamidinium and Cesium Lead Iodide Solid-State Alloys
Abstract
Goldschmidt tolerance factor ( t ) is an empirical index for predicting stable crystal structures of perovskite materials. A t value between 0.8 and 1.0 is favorable for cubic perovskite structure, and larger (>1) or smaller (<0.8) values of tolerance factor usually result in nonperovskite structures. CH(NH 2 ) 2 PbI 3 (FAPbI 3 ) can exist in the perovskite α-phase (black phase) with good photovoltaic properties. However, it has a large tolerance factor and is more stable in the hexagonal δ H -phase (yellow phase), with δ H -to-α phase-transition temperature higher than room temperature. On the other hand, CsPbI 3 is stabilized to an orthorhombic structure (δ O -phase) at room temperature due to its small tolerance factor. We find that, by alloying FAPbI 3 with CsPbI 3, the effective tolerance factor can be tuned, and the stability of the photoactive α-phase of the mixed solid-state perovskite alloys FA 1– x Cs x PbI 3 is enhanced, which is in agreement with our first-principles calculations. Thin films of the FA 0.85 Cs 0.15 PbI 3 perovskite alloy demonstrate much improved stability in a high-humidity environment; this contrasts significantly with the pure FAPbI 3 film for which the α-to-δ H phase transition (associated with yellowing appearance) is accelerated by humidity environment. Due to phase stabilization, the FA 0.85 Cs 0.15 PbI 3 solid-state alloy showed better solar cell performance and device stability than its FAPbI 3 counterparts. Our studies suggest that tuning the tolerance factor through solid-state alloying can be a general strategy to stabilize the desired perovskite structure for solar cell applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Die Gesetze der Krystallochemie
Goldschmidt, V. M. (1926) · Die Naturwissenschaften · doi:10.1007/bf01507527 · Cited by 4,012
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Cited by
Items 101–135 of 135
Metal Halide Perovskites in Quantum Dot Solar Cells: Progress and Prospects
Yuan, J., Hazarika, A., Zhao, Q., Ling, X., Moot, T., Ma, W., & Luther, J. M. (2020) · Joule · doi:10.1016/j.joule.2020.04.006 · Cited by 307
Initializing film homogeneity to retard phase segregation for stable perovskite solar cells
Bai, Y., Huang, Z., Zhang, X., Lu, J., Niu, X., He, Z., Zhu, C., Xiao, M., Song, Q., Wei, X., et al. (2022) · Science · doi:10.1126/science.abn3148 · Cited by 307
Myths and reality of HPbI3 in halide perovskite solar cells
Ke, W., Spanopoulos, I., Stoumpos, C. C., & Kanatzidis, M. G. (2018) · Nature Communications · doi:10.1038/s41467-018-07204-y · Cited by 304
Han, J., Park, K., Tan, S., Vaynzof, Y., Xue, J., Diau, E. W.-G., Bawendi, M. G., Lee, J.-W., & Jeon, I. (2025) · Nature Reviews Methods Primers · doi:10.1038/s43586-024-00373-9 · Cited by 304
Harikesh, P. C., Mulmudi, H. K., Ghosh, B., Goh, T. W., Teng, Y. T., Thirumal, K., Lockrey, M., Weber, K., Koh, T. M., Li, S., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03310 · Cited by 303
Yang, Z., Surrente, A., Galkowski, K., Miyata, A., Portugall, O., Sutton, R. J., Haghighirad, A. A., Snaith, H. J., Maude, D. K., Plochocka, P., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00416 · Cited by 302
High-Efficiency Silicon Heterojunction Solar Cells: Materials, Devices and Applications
Liu, Y., Li, Y., Wu, Y., Yang, G., Mazzarella, L., Procel-Moya, P., Tamboli, A. C., Weber, K., Boccard, M., Isabella, O., et al. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100579 · Cited by 293
Perovskites-Based Solar Cells: A Review of Recent Progress, Materials and Processing Methods
Shi, Z., & Jayatissa, A. H. (2018) · Materials · doi:10.3390/ma11050729 · Cited by 291
High Chloride Doping Levels Stabilize the Perovskite Phase of Cesium Lead Iodide
Dastidar, S., Egger, D. A., Tan, L. Z., Cromer, S. B., Dillon, A. D., Liu, S., Kronik, L., Rappe, A. M., & Fafarman, A. T. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00635 · Cited by 290
Defect Study and Modelling of SnX3-Based Perovskite Solar Cells with SCAPS-1D
Samiul Islam, M., Sobayel, K., Al-Kahtani, A., Islam, M. A., Muhammad, G., Amin, N., Shahiduzzaman, M., & Akhtaruzzaman, M. (2021) · Nanomaterials · doi:10.3390/nano11051218 · Cited by 289
ABX3 Perovskites for Tandem Solar Cells
Anaya, M., Lozano, G., Calvo, M. E., & Míguez, H. (2017) · Joule · doi:10.1016/j.joule.2017.09.017 · Cited by 286
Powalla, M., Paetel, S., Ahlswede, E., Wuerz, R., Wessendorf, C. D., & Magorian Friedlmeier, T. (2018) · Applied Physics Reviews · doi:10.1063/1.5061809 · Cited by 281
Hysteresis-free perovskite solar cells made of potassium-doped organometal halide perovskite
Tang, Z., Bessho, T., Awai, F., Kinoshita, T., Maitani, M. M., Jono, R., Murakami, T. N., Wang, H., Kubo, T., Uchida, S., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-12436-x · Cited by 272
Ma, F., Li, J., Li, W., Lin, N., Wang, L., & Qiao, J. (2017) · Chemical Science · doi:10.1039/c6sc03542f · Cited by 269
Quantitative Phase-Change Thermodynamics and Metastability of Perovskite-Phase Cesium Lead Iodide
Dastidar, S., Hawley, C. J., Dillon, A. D., Gutierrez-Perez, A. D., Spanier, J. E., & Fafarman, A. T. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b00134 · Cited by 268
Hazarika, A., Zhao, Q., Gaulding, E. A., Christians, J. A., Dou, B., Marshall, A. R., Moot, T., Berry, J. J., Johnson, J. C., & Luther, J. M. (2018) · ACS Nano · doi:10.1021/acsnano.8b05555 · Cited by 264
Self-citationFrom bulk to molecularly thin hybrid perovskites
Leng, K., Fu, W., Liu, Y., Chhowalla, M., & Loh, K. P. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0185-1 · Cited by 264
A Review: Thermal Stability of Methylammonium Lead Halide Based Perovskite Solar Cells
Ava, T. T., Al Mamun, A., Marsillac, S., & Namkoong, G. (2019) · Applied Sciences · doi:10.3390/app9010188 · Cited by 260
The Many Faces of Mixed Ion Perovskites: Unraveling and Understanding the Crystallization Process
Gratia, P., Zimmermann, I., Schouwink, P., Yum, J.-H., Audinot, J.-N., Sivula, K., Wirtz, T., & Nazeeruddin, M. K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00981 · Cited by 258
Solution-Processed All-Perovskite Multi-junction Solar Cells
McMeekin, D. P., Mahesh, S., Noel, N. K., Klug, M. T., Lim, J., Warby, J. H., Ball, J. M., Herz, L. M., Johnston, M. B., & Snaith, H. J. (2019) · Joule · doi:10.1016/j.joule.2019.01.007 · Cited by 257
Wu, T., Wang, Y., Dai, Z., Cui, D., Wang, T., Meng, X., Bi, E., Yang, X., & Han, L. (2019) · Advanced Materials · doi:10.1002/adma.201900605 · Cited by 257
Solution‐Processable Perovskite Solar Cells toward Commercialization: Progress and Challenges
Wang, P., Wu, Y., Cai, B., Ma, Q., Zheng, X., & Zhang, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807661 · Cited by 255
Li, Z., Xu, Q., Sun, Q., Hou, Z., & Yin, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807280 · Cited by 233
Self-citationRecent progress in perovskite solar cells: from device to commercialization
Luo, X., Lin, X., Gao, F., Zhao, Y., Li, X., Zhan, L., Qiu, Z., Wang, J., Chen, C., Meng, L., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-022-1426-x · Cited by 142
Control over Crystal Size in Vapor Deposited Metal-Halide Perovskite Films
Lohmann, K. B., Patel, J. B., Rothmann, M. U., Xia, C. Q., Oliver, R. D. J., Herz, L. M., Snaith, H. J., & Johnston, M. B. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00183 · Cited by 113
Gao, Z., Zhang, H., Mao, G., Ren, J., Chen, Z., Wu, C., Gates, I. D., Yang, W., Ding, X., & Yao, J. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.150916 · Cited by 101
Kosasih, F. U., & Ducati, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.02.055 · Cited by 86
Lu, Y., Wei, D., Liu, W., Meng, J., Huo, X., Zhang, Y., Liang, Z., Qiao, B., Zhao, S., Song, D., et al. (2023) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2022.10.024 · Cited by 83
Data-driven design of novel halide perovskite alloys
Mannodi-Kanakkithodi, A., & Chan, M. K. Y. (2022) · Energy & Environmental Science · doi:10.1039/d1ee02971a · Cited by 73
Mundt, L. E., & Schelhas, L. T. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903074 · Cited by 58
Learn-and-Match Molecular Cations for Perovskites
Park, H., Mall, R., Alharbi, F. H., Sanvito, S., Tabet, N., Bensmail, H., & El-Mellouhi, F. (2019) · The Journal of Physical Chemistry A · doi:10.1021/acs.jpca.9b06208 · Cited by 50
Imaging Real-Time Amorphization of Hybrid Perovskite Solar Cells under Electrical Biasing
Kim, M.-C., Ahn, N., Cheng, D., Xu, M., Ham, S.-Y., Pan, X., Kim, S. J., Luo, Y., Fenning, D. P., Tan, D. H. S., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c01707 · Cited by 40
Degradation of inverted architecture CH3NH3PbI3‐xC lx perovskite solar cells due to trapped moisture
Bracher, C., Freestone, B. G., Mohamad, D. K., Smith, J. A., & Lidzey, D. G. (2018) · Energy Science & Engineering · doi:10.1002/ese3.180 · Cited by 27
Nakanishi, E., Nishikubo, R., Ishiwari, F., Nakamura, T., Wakamiya, A., & Saeki, A. (2022) · ACS Materials Letters · doi:10.1021/acsmaterialslett.2c00229 · Cited by 16
Elemental segregation and dimensional separation in halide perovskite light-emitting diodes
Yang, S. J., Lee, Y. H., Tateno, K., & Dou, L. (2024) · Progress in Quantum Electronics · doi:10.1016/j.pquantelec.2024.100537 · Cited by 10
Metadata
- Authors
- Li, Z., Yang, M., Park, J.-S., Wei, S.-H., Berry, J. J., & Zhu, K.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-12-30
- Volume
- 28
- Issue
- 1
- Pages
- 284-292
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2216495470
- Cited by
- 2,269
- References
- 34
- FWCI
- 61.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.