The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Significant Enhancement of Thermal Conductivity in Bioinspired Freestanding Boron Nitride Papers Filled with Graphene Oxide
Abstract
Owing to the miniaturization of power electronics and the development of portable and flexible devices, demands for highly thermally conductive, mechanically flexible, and electrically insulating composites have substantially increased. However, the conventional method to improve thermal conductivity usually yields both an undesired value (usually below 10 W m –1 K –1 ) and poor flexibility. Thus, a combination of all the desired properties together remains a technical challenge. Bioinspired engineering offers great promise in the synthesis and fabrication of thermal materials that are different from engineering through conventional approaches. Inspired by the interface and orientation of natural nacre, we report on thermally conductive and mechanically flexible papers based on boron nitride nanosheets (BNNSs) and graphene oxide (GO) via a simple vacuum-assisted filtration process. We experimentally show that the papers possess high thermal conductivity of 29.8 W m –1 K –1, excellent mechanical flexibility, and satisfactory electrical insulation. We attribute the high thermal conductivity to the well-designed BNNS–GO interface as well as the advantageous orientation in layered structure. This approach to constructing thermally conductive composites provides a creative opportunity for design and fabrication of high-performance materials in the near future, and this kind of paper has great potential application in next-generation commercial portable electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cahill, D. G., Ford, W. K., Goodson, K. E., Mahan, G. D., Majumdar, A., Maris, H. J., Merlin, R., & Phillpot, S. R. (2003) · Journal of Applied Physics · doi:10.1063/1.1524305 · Cited by 2,825
Zhi, C., Bando, Y., Tang, C., Kuwahara, H., & Golberg, D. (2009) · Advanced Materials · doi:10.1002/adma.200900323 · Cited by 1,756
Graphene–Multilayer Graphene Nanocomposites as Highly Efficient Thermal Interface Materials
Shahil, K. M. F., & Balandin, A. A. (2012) · Nano Letters · doi:10.1021/nl203906r · Cited by 1,467
Structural Biological Materials: Critical Mechanics-Materials Connections
Meyers, M. A., McKittrick, J., & Chen, P.-Y. (2013) · Science · doi:10.1126/science.1220854 · Cited by 1,171
Surprising strength of silkworm silk
Shao, Z., & Vollrath, F. (2002) · Nature · doi:10.1038/418741a · Cited by 1,003
Thermal Interface Materials: Historical Perspective, Status, and Future Directions
Prasher, R. (2006) · Proceedings of the IEEE · doi:10.1109/jproc.2006.879796 · Cited by 927
Polyethylene nanofibres with very high thermal conductivities
Shen, S., Henry, A., Tong, J., Zheng, R., & Chen, G. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.27 · Cited by 926
Lin, Y., & Connell, J. W. (2012) · Nanoscale · doi:10.1039/c2nr32201c · Cited by 902
Thermal properties of graphene and multilayer graphene: Applications in thermal interface materials
Shahil, K. M. F., & Balandin, A. A. (2012) · Solid State Communications · doi:10.1016/j.ssc.2012.04.034 · Cited by 829
Huang, X., Zhi, C., Jiang, P., Golberg, D., Bando, Y., & Tanaka, T. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201824 · Cited by 647
Thermal conductance of interfaces between highly dissimilar materials
Lyeo, H.-K., & Cahill, D. G. (2006) · Physical Review B · doi:10.1103/physrevb.73.144301 · Cited by 576
Layered nanocomposites inspired by the structure and mechanical properties of nacre
Wang, J., Cheng, Q., & Tang, Z. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15106a · Cited by 539
Flexible electronics based on inorganic nanowires
Liu, Z., Xu, J., Chen, D., & Shen, G. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00116h · Cited by 512
Self-citationHighly Thermally Conductive Papers with Percolative Layered Boron Nitride Nanosheets
Zhu, H., Li, Y., Fang, Z., Xu, J., Cao, F., Wan, J., Preston, C., Yang, B., & Hu, L. (2014) · ACS Nano · doi:10.1021/nn500134m · Cited by 493
Self-citationRole of Interface on the Thermal Conductivity of Highly Filled Dielectric Epoxy/AlN Composites
Huang, X., Iizuka, T., Jiang, P., Ohki, Y., & Tanaka, T. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3026545 · Cited by 455
High Thermal Conductivity of Single Polyethylene Chains Using Molecular Dynamics Simulations
Henry, A., & Chen, G. (2008) · Physical Review Letters · doi:10.1103/physrevlett.101.235502 · Cited by 438
Weidenfeller, B., Höfer, M., & Schilling, F. R. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.11.005 · Cited by 420
Large-scale production of two-dimensional nanosheets
Yao, Y., Lin, Z., Li, Z., Song, X., Moon, K.-S., & Wong, C.-P. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30587a · Cited by 410
Self-citationFlax and hemp fibres as raw materials for thermal insulations
Kymäläinen, H.-R., & Sjöberg, A.-M. (2008) · Building and Environment · doi:10.1016/j.buildenv.2007.03.006 · Cited by 398
Yao, H., Tan, Z., Fang, H., & Yu, S. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201004748 · Cited by 326
Wang, J., Cheng, Q., Lin, L., & Jiang, L. (2014) · ACS Nano · doi:10.1021/nn406428n · Cited by 325
Bioinspired Layered Materials with Superior Mechanical Performance
Cheng, Q., Jiang, L., & Tang, Z. (2014) · Accounts of Chemical Research · doi:10.1021/ar400279t · Cited by 315
Bioinspired Engineering of Thermal Materials
Tao, P., Shang, W., Song, C., Shen, Q., Zhang, F., Luo, Z., Yi, N., Zhang, D., & Deng, T. (2015) · Advanced Materials · doi:10.1002/adma.201401449 · Cited by 311
Thermal and Thermoelectric Properties of Graphene
Xu, Y., Li, Z., & Duan, W. (2014) · Small · doi:10.1002/smll.201303701 · Cited by 300
Xie, B.-H., Huang, X., & Zhang, G.-J. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.06.010 · Cited by 293
Zeng, X., Ye, L., Yu, S., Li, H., Sun, R., Xu, J., & Wong, C.-P. (2015) · Nanoscale · doi:10.1039/c5nr00228a · Cited by 286
Self-citationThermally reduced graphene oxide films as flexible lateral heat spreaders
Song, N.-J., Chen, C.-M., Lu, C., Liu, Z., Kong, Q.-Q., & Cai, R. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02693d · Cited by 260
Xie, S. H., Liu, Y. Y., & Li, J. Y. (2008) · Applied Physics Letters · doi:10.1063/1.2949074 · Cited by 239
Artificially Stacked Atomic Layers: Toward New van der Waals Solids
Gao, G., Gao, W., Cannuccia, E., Taha-Tijerina, J., Balicas, L., Mathkar, A., Narayanan, T. N., Liu, Z., Gupta, B. K., Peng, J., et al. (2012) · Nano Letters · doi:10.1021/nl301061b · Cited by 229
Wan, S., Li, Y., Peng, J., Hu, H., Cheng, Q., & Jiang, L. (2015) · ACS Nano · doi:10.1021/nn506148w · Cited by 224
Hierarchical Graphene–Carbon Fiber Composite Paper as a Flexible Lateral Heat Spreader
Kong, Q., Liu, Z., Gao, J., Chen, C., Zhang, Q., Zhou, G., Tao, Z., Zhang, X., Wang, M., Li, F., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304144 · Cited by 203
Learning from Nature: Constructing Integrated Graphene-Based Artificial Nacre
Cheng, Q., Duan, J., Zhang, Q., & Jiang, L. (2015) · ACS Nano · doi:10.1021/acsnano.5b01126 · Cited by 183
Huang, X., Liu, G., & Wang, X. (2012) · Advanced Materials · doi:10.1002/adma.201104668 · Cited by 179
David, L., & Singh, G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5080847 · Cited by 178
Toughening mechanisms in bioinspired multilayered materials
Askarinejad, S., & Rahbar, N. (2015) · Journal of The Royal Society Interface · doi:10.1098/rsif.2014.0855 · Cited by 168
Mechanism of thermal conductivity reduction in few-layer graphene
Singh, D., Murthy, J. Y., & Fisher, T. S. (2011) · Journal of Applied Physics · doi:10.1063/1.3622300 · Cited by 159
Xu, Y.-T., Guo, Y., Li, C., Zhou, X., Tucker, M. C., Fu, X., Sun, R., & Wong, C. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.10.011 · Cited by 156
Self-citationBoron Nitride Nanomaterials for Thermal Management Applications
Meziani, M. J., Song, W., Wang, P., Lu, F., Hou, Z., Anderson, A., Maimaiti, H., & Sun, Y.-P. (2015) · ChemPhysChem · doi:10.1002/cphc.201402814 · Cited by 153
High Mechanical Performance of Layered Graphene Oxide/Poly(vinyl alcohol) Nanocomposite Films
Liu, L., Gao, Y., Liu, Q. L., Kuang, J., Zhou, D., Ju, S., Han, B., & Zhang, Z. (2013) · Small · doi:10.1002/smll.201300819 · Cited by 151
Thermal transport across graphene and single layer hexagonal boron nitride
Zhang, J., Hong, Y., & Yue, Y. (2015) · Journal of Applied Physics · doi:10.1063/1.4916985 · Cited by 150
Heat flow at nanoparticle interfaces
Warzoha, R. J., & Fleischer, A. S. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.03.014 · Cited by 144
Low-density three-dimensional foam using self-reinforced hybrid two-dimensional atomic layers
Vinod, S., Tiwary, C. S., Autreto, P. A. D. S., Taha‐Tijerina, J., Özden, Ş., Chipara, A. C., Vajtai, R., Galvao, D. S., Narayanan, T. N., & Ajayan, P. M. (2014) · Nature Communications · doi:10.1038/ncomms5541 · Cited by 106
Graphene interconnects fully encapsulated in layered insulator hexagonal boron nitride
Jain, N., Durcan, C., Jacobs-Gedrim, R. B., et al. (2013) · Nanotechnology · doi:10.1088/0957-4484/24/35/355202 · Cited by 40
Chen, X., Xu, Y., Zou, X., Gu, B., & Duan, W. (2013) · Physical Review B · doi:10.1103/physrevb.87.155438 · Cited by 36
Robust linear dependence of thermal conductance on radial strain in carbon nanotubes
Zhu, H., Xu, Y., Gu, B.-L., et al. (2012) · New Journal of Physics · doi:10.1088/1367-2630/14/1/013053 · Cited by 22
Cited by
Chen, J., Huang, X., Zhu, Y., & Jiang, P. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604754 · Cited by 756
Han, J., Du, G., Gao, W., & Bai, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900412 · Cited by 620
Thermal Conductivity of Graphene-Polymer Composites: Mechanisms, Properties, and Applications
Li, A., Zhang, C., & Zhang, Y.-F. (2017) · Polymers · doi:10.3390/polym9090437 · Cited by 419
Wang, Z., Wu, Z., Weng, L., Ge, S., Jiang, D., Huang, M., Mulvihill, D. M., Chen, Q., Guo, Z., Jazzar, A., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301549 · Cited by 419
Wu, K., Wang, J., Liu, D., Lei, C., Liu, D., Lei, W., & Fu, Q. (2020) · Advanced Materials · doi:10.1002/adma.201906939 · Cited by 400
Metadata
- Authors
- Yao, Y., Zeng, X., Wang, F., Sun, R., Xu, J.-B., & Wong, C.-P.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-02-04
- Volume
- 28
- Issue
- 4
- Pages
- 1049-1057
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2254467217
- Cited by
- 279
- References
- 45
- FWCI
- 14.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.