The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Data-Driven First-Principles Methods for the Study and Design of Alkali Superionic Conductors
Open accessAbstract
We present a detailed exposition of how first-principles methods can be used to guide alkali superionic conductor (ASIC) study and design. Using the argyrodite Li 6 PS 5 Cl as a case study, we demonstrate how modern information technology (IT) infrastructure and software tools can facilitate the assessment of alkali superionic conductors in terms of various critical properties of interest such as phase and electrochemical stability and ionic conductivity. The emphasis is on well-documented, reproducible analysis code that can be readily generalized to other material systems and design problems. For our chosen Li 6 PS 5 Cl case study material, we show that Li excess is crucial to enhancing its conductivity by increasing the occupancy of interstitial sites that promote long-range Li + diffusion between cage-like frameworks. The predicted room-temperature conductivities and activation barriers are in reasonably good agreement with experimental values.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
Canonical dynamics: Equilibrium phase-space distributions
Hoover, W. G. (1985) · Physical Review A · doi:10.1103/physreva.31.1695 · Cited by 23,465
A climbing image nudged elastic band method for finding saddle points and minimum energy paths
Henkelman, G., Uberuaga, B. P., & Jónsson, H. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1329672 · Cited by 21,620
A unified formulation of the constant temperature molecular dynamics methods
Nosé, S. (1984) · The Journal of Chemical Physics · doi:10.1063/1.447334 · Cited by 19,152
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Self-citationUnified Approach for Molecular Dynamics and Density-Functional Theory
Car, R., & Parrinello, M. (1985) · Physical Review Letters · doi:10.1103/physrevlett.55.2471 · Cited by 10,754
The quickhull algorithm for convex hulls
Barber, C. B., Dobkin, D. P., & Huhdanpaa, H. (1996) · ACM Transactions on Mathematical Software · doi:10.1145/235815.235821 · Cited by 5,359
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis
Ong, S. P., Richards, W. D., Jain, A., Hautier, G., Kocher, M., Cholia, S., Gunter, D., Chevrier, V. L., Persson, K. A., & Ceder, G. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2012.10.028 · Cited by 4,534
Self-citationIPython: A System for Interactive Scientific Computing
Perez, F., & Granger, B. E. (2007) · Computing in Science & Engineering · doi:10.1109/mcse.2007.53 · Cited by 4,009
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,250
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Nudged elastic band method for finding minimum energy paths of transitions
JÓNSSON, H., MILLS, G., & JACOBSEN, K. W. (1998) · Classical and Quantum Dynamics in Condensed Phase Simulations · doi:10.1142/9789812839664_0016 · Cited by 2,174
High ionic conductivity in lithium lanthanum titanate
Inaguma, Y., Liquan, C., Itoh, M., Nakamura, T., Uchida, T., Ikuta, H., & Wakihara, M. (1993) · Solid State Communications · doi:10.1016/0038-1098(93)90841-a · Cited by 1,598
Design principles for solid-state lithium superionic conductors
Wang, Y., Richards, W. D., Ong, S. P., Miara, L. J., Kim, J. C., Mo, Y., & Ceder, G. (2015) · Nature Materials · doi:10.1038/nmat4369 · Cited by 1,485
Self-citationOng, S. P., Chevrier, V. L., Hautier, G., Jain, A., Moore, C., Kim, S., Ma, X., & Ceder, G. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01782a · Cited by 1,415
Self-citationAb initio study of lithium intercalation in metal oxides and metal dichalcogenides
Aydinol, M. K., Kohan, A. F., Ceder, G., Cho, K., & Joannopoulos, J. (1997) · Physical Review B · doi:10.1103/physrevb.56.1354 · Cited by 1,388
Formation enthalpies by mixing GGA and GGA+Ucalculations
Jain, A., Hautier, G., Ong, S. P., Moore, C. J., Fischer, C. C., Persson, K. A., & Ceder, G. (2011) · Physical Review B · doi:10.1103/physrevb.84.045115 · Cited by 1,321
Self-citationSeino, Y., Ota, T., Takada, K., Hayashi, A., & Tatsumisago, M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee41655k · Cited by 1,302
Inorganic solid Li ion conductors: An overview
Knauth, P. (2009) · Solid State Ionics · doi:10.1016/j.ssi.2009.03.022 · Cited by 1,170
Superionic glass-ceramic electrolytes for room-temperature rechargeable sodium batteries
Hayashi, A., Noi, K., Sakuda, A., & Tatsumisago, M. (2012) · Nature Communications · doi:10.1038/ncomms1843 · Cited by 1,060
Progress and prospective of solid-state lithium batteries
Takada, K. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.034 · Cited by 1,056
Electrolytes for solid oxide fuel cells
Fergus, J. W. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.06.062 · Cited by 998
The inorganic crystal structure data base
Bergerhoff, G., Hundt, R., Sievers, R., & Brown, I. D. (1983) · Journal of Chemical Information and Computer Sciences · doi:10.1021/ci00038a003 · Cited by 946
Li−Fe−P−O2 Phase Diagram from First Principles Calculations
Ong, S. P., Wang, L., Kang, B., & Ceder, G. (2008) · Chemistry of Materials · doi:10.1021/cm702327g · Cited by 814
Self-citationFirst Principles Study of the Li10GeP2S12 Lithium Super Ionic Conductor Material
Mo, Y., Ong, S. P., & Ceder, G. (2012) · Chemistry of Materials · doi:10.1021/cm203303y · Cited by 805
Self-citationOng, S. P., Mo, Y., Richards, W. D., Miara, L., Lee, H. S., & Ceder, G. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23355j · Cited by 710
Self-citationLi10SnP2S12: An Affordable Lithium Superionic Conductor
Bron, P., Johansson, S., Zick, K., Schmedt auf der Günne, J., Dehnen, S., & Roling, B. (2013) · Journal of the American Chemical Society · doi:10.1021/ja407393y · Cited by 655
FireWorks: a dynamic workflow system designed for high‐throughput applications
Jain, A., Ong, S. P., Chen, W., Medasani, B., Qu, X., Kocher, M., Brafman, M., Petretto, G., Rignanese, G., Hautier, G., et al. (2015) · Concurrency and Computation: Practice and Experience · doi:10.1002/cpe.3505 · Cited by 547
Self-citationMeng, Y. S., & Arroyo-de Dompablo, M. E. (2009) · Energy & Environmental Science · doi:10.1039/b901825e · Cited by 545
Ong, S. P., Cholia, S., Jain, A., Brafman, M., Gunter, D., Ceder, G., & Persson, K. A. (2015) · Computational Materials Science · doi:10.1016/j.commatsci.2014.10.037 · Cited by 480
Self-citationAlgorithm for generating derivative structures
Hart, G. L. W., & Forcade, R. W. (2008) · Physical Review B · doi:10.1103/physrevb.77.224115 · Cited by 427
Kuhn, A., Gerbig, O., Zhu, C., Falkenberg, F., Maier, J., & Lotsch, B. V. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp02046d · Cited by 316
Zhu, Z., Chu, I.-H., Deng, Z., & Ong, S. P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03656 · Cited by 258
Self-citationChu, I.-H., Nguyen, H., Hy, S., Lin, Y.-C., Wang, Z., Xu, Z., Deng, Z., Meng, Y. S., & Ong, S. P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00833 · Cited by 225
Self-citationDeng, Z., Radhakrishnan, B., & Ong, S. P. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00988 · Cited by 170
Self-citationRecharging lithium battery research with first-principles methods
Ceder, G., Hautier, G., Jain, A., & Ong, S. P. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.31 · Cited by 155
Self-citationComputational and Experimental Investigations of Na-Ion Conduction in Cubic Na3PSe4
Bo, S., Wang, Y. E., Kim, J. C., Richards, W. D., & Ceder, G. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04013 · Cited by 137
Computational studies of solid-state alkali conduction in rechargeable alkali-ion batteries
Deng, Z., Mo, Y., & Ong, S. P. (2016) · NPG Asia Materials · doi:10.1038/am.2016.7 · Cited by 100
Self-citation
Cited by
Understanding interface stability in solid-state batteries
Xiao, Y., Wang, Y., Bo, S.-H., Kim, J. C., Miara, L. J., & Ceder, G. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0157-5 · Cited by 1,219
Park, K. H., Bai, Q., Kim, D. H., Oh, D. Y., Zhu, Y., Mo, Y., & Jung, Y. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800035 · Cited by 589
Solid-state lithium batteries: Safety and prospects
Guo, Y., Wu, S., He, Y.-B., Kang, F., Chen, L., Li, H., & Yang, Q.-H. (2022) · eScience · doi:10.1016/j.esci.2022.02.008 · Cited by 507
Wang, C., Liang, J., Zhao, Y., Zheng, M., Li, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00551k · Cited by 489
Computation-Accelerated Design of Materials and Interfaces for All-Solid-State Lithium-Ion Batteries
Nolan, A. M., Zhu, Y., He, X., Bai, Q., & Mo, Y. (2018) · Joule · doi:10.1016/j.joule.2018.08.017 · Cited by 398
Metadata
- Authors
- Deng, Z., Zhu, Z., Chu, I.-H., & Ong, S. P.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-09-13
- Volume
- 29
- Issue
- 1
- Pages
- 281-288
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2507198627
- Cited by
- 321
- References
- 43
- FWCI
- 9.30
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.