CoChat

Effect of Rigid Bridge-Protection Units, Quadrupolar Interactions, and Blending in Organic Electro-Optic Chromophores

Open access
Elder, Delwin L., Haffner, Christian, Heni, Wolfgang, Fedoryshyn, Yuriy, Garrett, Kerry E., Johnson, Lewis E., Campbell, Rachael A., Avila, Jose D., Robinson, Bruce H., Leuthold, Juerg, Dalton, Larry R. · 2017 · Chemistry of Materials
Cited by 98

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

Abstract

A new organic electro-optic (EO) molecule was designed with two modifications aimed at increasing acentric order. The molecule is based on the well-known CLD donor-π bridge-acceptor template. The first structural modification introduces rigid aromatic fluorenyl and naphthyl site-isolation units (sterically bulky functional groups) to reduce aggregation. Site isolation units have been used in the past, but this is the first time that both the “front” and “back” of the CLD tetraene bridge have been modified with site-isolation units, and we had to introduce new synthetic methodology to do so. The second design element was the inclusion of cooperatively interacting aromatic dendron (HD) and fluoroaromatic dendron (FD) side groups to increase the acentric order. HD/FD units have previously been successfully used to increase EO performance, but we changed their location on the chromophore: they are attached to the donor and acceptor ends of the molecule to better match side chain ordering with the dipole moment of the molecule. Comparison chromophores were synthesized with alkyl (-MOM), hydroxyl (-OH), or HD units on the acceptor end of the molecule and either the traditional CLD bridge (T-bridge) or modified bridge (BB-bridge) for a family of eight chromophores. The HD/FD units increased glass transition temperature, T g, by 4–21 °C, and the bulky bridge modification increased T g by 27–44 °C, which is very beneficial as that results in extra thermal stability of the poling-induced acentric order. UV/vis absorbance spectroscopy shows that the site-isolation units reduce aggregation. Unfortunately, poor film formation of the neat materials precluded full chromophore evaluation in poling and r 33 experiments. The EO performance obtained for HD-BB-FD and HD-BB-OH was lower than expected, with r 33 / E p ≈ 1 nm 2 V –2 at 1310 nm. We found that blending in 25 wt % YLD124 improved film-forming and poling efficiency. Due to the effect of blending and improved site isolation, r 33 / E p improved to 2.1–2.3 nm 2 V –2 for 3:1 HD-BB-FD:YLD124, HD-BB-OH:YLD124, and HD-BB-MOM:YLD124, and r 33 as high as 351 pm V –1 was obtained with 3:1 HD-BB-MOM:YLD124. Chromophore blends were also evaluated in plasmonic organic hybrid (POH) phase modulators with slot lengths of 5–20 μm. In POH devices, r 33 was as high as 325 pm V –1 at 1260 nm and 220 pm V –1 at 1520 nm. Overall, the increase in acentric order afforded by the HD/FD interactions was found to be small and resulted in no increase in r 33 due to the reduced number density. Ultimately, the increase in r 33 / E p afforded by the site isolation and blending resulted in a modest increase in r 33 / E p relative to YLD124, but combined with the increased T g, the chromophore system is a significant improvement and points to an important design strategy.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acs.chemmater.7b02020

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 98

Metadata

Authors
Elder, D. L., Haffner, C., Heni, W., Fedoryshyn, Y., Garrett, K. E., Johnson, L. E., Campbell, R. A., Avila, J. D., Robinson, B. H., Leuthold, J., & Dalton, L. R.
Venue
Chemistry of Materials
Published
2017-07-21
Volume
29
Issue
15
Pages
6457-6471
ISSN
  • 0897-4756 (ISSN-L)
  • 1520-5002
OpenAlex
W2727868291
Cited by
98
References
3
FWCI
4.64
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.