The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
High-Temperature Behavior and Surface Chemistry of Carbide MXenes Studied by Thermal Analysis
Abstract
Two-dimensional (2D) transition-metal carbides and nitrides (MXenes) have attracted significant attention due to their electronic, electrochemical, chemical, and optical properties. However, understanding of their thermal stability is still lacking. To date, MXenes are synthesized via top-down wet chemical etching, which intrinsically results in surface terminations. Here, we provide detailed insight into the surface terminations of three carbide MXenes (Ti 3 C 2 T x, Mo 2 CT x, and Nb 2 CT x ) by performing thermal gravimetric analysis with mass spectrometry analysis (TA–MS) up to 1500 °C under a He atmosphere. This specific technique enables probing surface terminations including hydroxyl (−OH), oxy (═O), and fluoride (−F) and intercalated species, such as salts and structural water. The MXene hydrophilicity depends on the type of etching (hydrofluoric acid concentration and/or mixed acid composition) and subsequent delamination conditions. We show that the amount of structural water in Ti 3 C 2 T x increases with decreasing O-containing surface terminations. The thermal stability of Ti 3 C 2 T x is improved by employing a low HF concentration or using a mixture of etchant acids, such as H 2 SO 4 /HF or HCl/HF instead of only HF, due to the reduced defect density. When tetramethylammonium hydroxide (TMAOH) is used for delamination, new N-containing species appear on the MXene surface. Moreover, free-standing films produced from Ti 3 C 2 T x etched with different HF concentrations and delaminated using TMAOH have similar TA–MS profiles, indicating that the post-treatment of Ti 3 C 2 T x controls its surface chemistry. The thermal stability of MXenes strongly depends on their chemical composition and structure; Ti 3 C 2 T x is more thermally stable than the fewer-atomic-layered Mo 2 CT x or Nb 2 CT x, and Mo 2 CT x is more/less thermally stable than Nb 2 CT x .
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Hu, M., Hu, T., Li, Z., Yang, Y., Cheng, R., Yang, J., Cui, C., & Wang, X. (2018) · ACS Nano · doi:10.1021/acsnano.8b00676 · Cited by 468
RetractedTwo‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Self-citation2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Self-citationElectromagnetic interference shielding with 2D transition metal carbides (MXenes)
Shahzad, F., Alhabeb, M., Hatter, C. B., Anasori, B., Man Hong, S., Koo, C. M., & Gogotsi, Y. (2016) · Science · doi:10.1126/science.aag2421 · Cited by 5,201
Self-citationGuidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Self-citationUltra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides
Lukatskaya, M. R., Kota, S., Lin, Z., Zhao, M.-Q., Shpigel, N., Levi, M. D., Halim, J., Taberna, P.-L., Barsoum, M. W., Simon, P., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.105 · Cited by 2,335
Self-citationFlexible and conductive MXene films and nanocomposites with high capacitance
Ling, Z., Ren, C. E., Zhao, M.-Q., Yang, J., Giammarco, J. M., Qiu, J., Barsoum, M. W., & Gogotsi, Y. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1414215111 · Cited by 2,274
Self-citationNew Two-Dimensional Niobium and Vanadium Carbides as Promising Materials for Li-Ion Batteries
Naguib, M., Halim, J., Lu, J., Cook, K. M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2013) · Journal of the American Chemical Society · doi:10.1021/ja405735d · Cited by 2,150
Self-citationX-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)
Halim, J., Cook, K. M., Naguib, M., Eklund, P., Gogotsi, Y., Rosen, J., & Barsoum, M. W. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.089 · Cited by 2,047
Self-citationNovel Electronic and Magnetic Properties of Two‐Dimensional Transition Metal Carbides and Nitrides
Khazaei, M., Arai, M., Sasaki, T., Chung, C., Venkataramanan, N. S., Estili, M., Sakka, Y., & Kawazoe, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202502 · Cited by 1,998
Cited by
The world of two-dimensional carbides and nitrides (MXenes)
VahidMohammadi, A., Rosen, J., & Gogotsi, Y. (2021) · Science · doi:10.1126/science.abf1581 · Cited by 3,191
Self-citationMXene chemistry, electrochemistry and energy storage applications
Li, X., Huang, Z., Shuck, C. E., Liang, G., Gogotsi, Y., & Zhi, C. (2022) · Nature Reviews Chemistry · doi:10.1038/s41570-022-00384-8 · Cited by 1,495
Self-citationFundamentals of MXene synthesis
Lim, K. R. G., Shekhirev, M., Wyatt, B. C., Anasori, B., Gogotsi, Y., & Seh, Z. W. (2022) · Nature Synthesis · doi:10.1038/s44160-022-00104-6 · Cited by 1,236
Self-citationScalable Manufacturing of Free‐Standing, Strong Ti3C2Tx MXene Films with Outstanding Conductivity
Zhang, J., Kong, N., Uzun, S., Levitt, A., Seyedin, S., Lynch, P. A., Qin, S., Han, M., Yang, W., Liu, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.202001093 · Cited by 972
Self-citationScalable Synthesis of Ti3C2Tx MXene
Shuck, C. E., Sarycheva, A., Anayee, M., Levitt, A., Zhu, Y., Uzun, S., Balitskiy, V., Zahorodna, V., Gogotsi, O., & Gogotsi, Y. (2020) · Advanced Engineering Materials · doi:10.1002/adem.201901241 · Cited by 868
Self-citationCharacterization of MXenes at every step, from their precursors to single flakes and assembled films
Shekhirev, M., Shuck, C. E., Sarycheva, A., & Gogotsi, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100757 · Cited by 752
Self-citationDeysher, G., Shuck, C. E., Hantanasirisakul, K., Frey, N. C., Foucher, A. C., Maleski, K., Sarycheva, A., Shenoy, V. B., Stach, E. A., Anasori, B., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b07708 · Cited by 720
Self-citationA critical analysis of the X-ray photoelectron spectra of Ti3C2Tz MXenes
Natu, V., Benchakar, M., Canaff, C., Habrioux, A., Célérier, S., & Barsoum, M. W. (2021) · Matter · doi:10.1016/j.matt.2021.01.015 · Cited by 717
A Review on MXene Synthesis, Stability, and Photocatalytic Applications
Murali, G., Reddy Modigunta, J. K., Park, Y. H., Lee, J.-H., Rawal, J., Lee, S.-Y., In, I., & Park, S.-J. (2022) · ACS Nano · doi:10.1021/acsnano.2c04750 · Cited by 668
Recent Advances in Oxidation Stable Chemistry of 2D MXenes
Cao, F., Zhang, Y., Wang, H., Khan, K., Tareen, A. K., Qian, W., Zhang, H., & Ågren, H. (2022) · Advanced Materials · doi:10.1002/adma.202107554 · Cited by 648
2D MXenes: Tunable Mechanical and Tribological Properties
Wyatt, B. C., Rosenkranz, A., & Anasori, B. (2021) · Advanced Materials · doi:10.1002/adma.202007973 · Cited by 646
Self-citationMXenes: New Horizons in Catalysis
Morales-García, Á., Calle-Vallejo, F., & Illas, F. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c03106 · Cited by 443
Ti3C2Tx MXene-Based Flexible Piezoresistive Physical Sensors
Wang, Y., Yue, Y., Cheng, F., Cheng, Y., Ge, B., Liu, N., & Gao, Y. (2022) · ACS Nano · doi:10.1021/acsnano.1c09925 · Cited by 406
Effect of Ti3AlC2 MAX Phase on Structure and Properties of Resultant Ti3C2Tx MXene
Shuck, C. E., Han, M., Maleski, K., Hantanasirisakul, K., Kim, S. J., Choi, J., Reil, W. E. B., & Gogotsi, Y. (2019) · ACS Applied Nano Materials · doi:10.1021/acsanm.9b00286 · Cited by 404
Self-citationRational Design of Flexible Two-Dimensional MXenes with Multiple Functionalities
Fu, Z., Wang, N., Legut, D., Si, C., Zhang, Q., Du, S., Germann, T. C., Francisco, J. S., & Zhang, R. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00348 · Cited by 396
Perspectives on solution processing of two-dimensional MXenes
Abdolhosseinzadeh, S., Jiang, X., Zhang, H., Qiu, J., & Zhang, C. (. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.010 · Cited by 386
Oxidation-resistant titanium carbide MXene films
Lee, Y., Kim, S. J., Kim, Y.-J., Lim, Y., Chae, Y., Lee, B.-J., Kim, Y.-T., Han, H., Gogotsi, Y., & Ahn, C. W. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta07036b · Cited by 357
Self-citationPerspectives of 2D MXene Tribology
Rosenkranz, A., Righi, M. C., Sumant, A. V., Anasori, B., & Mochalin, V. N. (2023) · Advanced Materials · doi:10.1002/adma.202207757 · Cited by 331
Self-citationYe, Z., Jiang, Y., Li, L., Wu, F., & Chen, R. (2021) · Advanced Materials · doi:10.1002/adma.202101204 · Cited by 330
Hao, S., Han, H., Yang, Z., Chen, M., Jiang, Y., Lu, G., Dong, L., Wen, H., Li, H., Liu, J., et al. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00901-w · Cited by 280
Roles of MXene in Pressure Sensing: Preparation, Composite Structure Design, and Mechanism
Lei, D., Liu, N., Su, T., Zhang, Q., Wang, L., Ren, Z., & Gao, Y. (2022) · Advanced Materials · doi:10.1002/adma.202110608 · Cited by 253
Cheng, R., Hu, T., Hu, M., Li, C., Liang, Y., Wang, Z., Zhang, H., Li, M., Wang, H., Lu, H., et al. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2019.09.013 · Cited by 105
Metadata
- Authors
- Seredych, M., Shuck, C. E., Pinto, D., Alhabeb, M., Precetti, E., Deysher, G., Anasori, B., Kurra, N., & Gogotsi, Y.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-04-03
- Volume
- 31
- Issue
- 9
- Pages
- 3324-3332
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2926234558
- Cited by
- 519
- References
- 48
- FWCI
- 18.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.