The DOI matches its Crossref record; 412 of the 412 references it cites were found in a registry or an index.
Physical and Chemical Factors Influencing the Printability of Hydrogel-based Extrusion Bioinks
Open accessAbstract
Bioprinting researchers agree that "printability" is a key characteristic for bioink development, but neither the meaning of the term nor the best way to experimentally measure it has been established. Furthermore, little is known with respect to the underlying mechanisms which determine a bioink's printability. A thorough understanding of these mechanisms is key to the intentional design of new bioinks. For the purposes of this review, the domain of printability is defined as the bioink requirements which are unique to bioprinting and occur during the printing process. Within this domain, the different aspects of printability and the factors which influence them are reviewed. The extrudability, filament classification, shape fidelity, and printing accuracy of bioinks are examined in detail with respect to their rheological properties, chemical structure, and printing parameters. These relationships are discussed and areas where further research is needed, are identified. This review serves to aid the bioink development process, which will continue to play a major role in the successes and failures of bioprinting, tissue engineering, and regenerative medicine going forward.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–400 of 412
Parameter optimization for 3D bioprinting of hydrogels
Webb, B., & Doyle, B. J. (2017) · Bioprinting · doi:10.1016/j.bprint.2017.09.001 · Cited by 186
Supramolecular Chirality of Thermotropic Liquid‐Crystalline Folic Acid Derivatives
Kato, T., Matsuoka, T., Nishii, M., Kamikawa, Y., Kanie, K., Nishimura, T., Yashima, E., & Ujiie, S. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200353231 · Cited by 185
Suntornnond, R., Tan, E. Y. S., An, J., & Chua, C. K. (2017) · Scientific Reports · doi:10.1038/s41598-017-17198-0 · Cited by 183
A Mineralized High Strength and Tough Hydrogel for Skull Bone Regeneration
Xu, B., Zheng, P., Gao, F., Wang, W., Zhang, H., Zhang, X., Feng, X., & Liu, W. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604327 · Cited by 178
Nanoengineered Colloidal Inks for 3D Bioprinting
Peak, C. W., Stein, J., Gold, K. A., & Gaharwar, A. K. (2018) · Langmuir · doi:10.1021/acs.langmuir.7b02540 · Cited by 178
A dynamic and self-crosslinked polysaccharide hydrogel with autonomous self-healing ability
Ding, F., Wu, S., Wang, S., Xiong, Y., Li, Y., Li, B., Deng, H., Du, Y., Xiao, L., & Shi, X. (2015) · Soft Matter · doi:10.1039/c5sm00587f · Cited by 174
Jia, Y.-G., & Zhu, X. X. (2015) · Chemistry of Materials · doi:10.1021/cm5041584 · Cited by 174
Menyo, M. S., Hawker, C. J., & Waite, J. H. (2013) · Soft Matter · doi:10.1039/c3sm51824h · Cited by 173
A Printable Photopolymerizable Thermosensitive p(HPMAm‐lactate)‐PEG Hydrogel for Tissue Engineering
Censi, R., Schuurman, W., Malda, J., di Dato, G., Burgisser, P. E., Dhert, W. J. A., van Nostrum, C. F., di Martino, P., Vermonden, T., & Hennink, W. E. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002428 · Cited by 171
Azevedo, S., Costa, A. M. S., Andersen, A., Choi, I. S., Birkedal, H., & Mano, J. F. (2017) · Advanced Materials · doi:10.1002/adma.201700759 · Cited by 171
Chemical modification and printability of shear-thinning hydrogel inks for direct-write 3D printing
Smith, P. T., Basu, A., Saha, A., & Nelson, A. (2018) · Polymer · doi:10.1016/j.polymer.2018.01.070 · Cited by 168
Injectable Self-Healing Hydrogel with Antimicrobial and Antifouling Properties
Li, L., Yan, B., Yang, J., Huang, W., Chen, L., & Zeng, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16192 · Cited by 167
Dynamic Hydrogels from Host–Guest Supramolecular Interactions
Mantooth, S. M., Munoz‐Robles, B. G., & Webber, M. J. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201800281 · Cited by 167
Xu, Y., Li, Y., Chen, Q., Fu, L., Tao, L., & Wei, Y. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19082198 · Cited by 166
Kiyotake, E. A., Douglas, A. W., Thomas, E. E., Nimmo, S. L., & Detamore, M. S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.041 · Cited by 166
Ahn, G., Min, K.-H., Kim, C., Lee, J.-S., Kang, D., Won, J.-Y., Cho, D.-W., Kim, J.-Y., Jin, S., Yun, W.-S., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-09201-5 · Cited by 165
Self-Healing Hydrogel with a Double Dynamic Network Comprising Imine and Borate Ester Linkages
Li, Y., Yang, L., Zeng, Y., Wu, Y., Wei, Y., & Tao, L. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b01301 · Cited by 165
Tuning Alginate-Gelatin Bioink Properties by Varying Solvent and Their Impact on Stem Cell Behavior
Li, Z., Huang, S., Liu, Y., Yao, B., Hu, T., Shi, H., Xie, J., & Fu, X. (2018) · Scientific Reports · doi:10.1038/s41598-018-26407-3 · Cited by 164
Hou, S., & Ma, P. X. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02839 · Cited by 163
Liu, Y., Meng, H., Qian, Z., Fan, N., Choi, W., Zhao, F., & Lee, B. P. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201700628 · Cited by 162
Shi, L., Zhao, Y., Xie, Q., Fan, C., Hilborn, J., Dai, J., & Ossipov, D. A. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700973 · Cited by 162
Carrow, J. K., Cross, L. M., Reese, R. W., Jaiswal, M. K., Gregory, C. A., Kaunas, R., Singh, I., & Gaharwar, A. K. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1716164115 · Cited by 162
Fan, Y., Zhang, Y., Zhao, Q., Xie, Y., Luo, R., Yang, P., & Weng, Y. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.03.007 · Cited by 161
Yesilyurt, V., Ayoob, A. M., Appel, E. A., Borenstein, J. T., Langer, R., & Anderson, D. G. (2017) · Advanced Materials · doi:10.1002/adma.201605947 · Cited by 160
Yu, H., Wang, Y., Yang, H., Peng, K., & Zhang, X. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb00746a · Cited by 160
Jessop, Z. M., Al‐Sabah, A., Gao, N., Kyle, S., Thomas, B. R., Badiei, N., Hawkins, K. M., & Whitaker, I. S. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0631 · Cited by 159
Resolution and shape in bioprinting: Strategizing towards complex tissue and organ printing
Lee, J. M., Ng, W. L., & Yeong, W. Y. (2019) · Applied Physics Reviews · doi:10.1063/1.5053909 · Cited by 159
Jin, Y., Chai, W., & Huang, Y. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.144 · Cited by 158
Characterisation of hyaluronic acid methylcellulose hydrogels for 3D bioprinting
Law, N., Doney, B., Glover, H., Qin, Y., Aman, Z. M., Sercombe, T. B., Liew, L. J., Dilley, R. J., & Doyle, B. J. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.09.031 · Cited by 158
Nejadnik, M. R., Yang, X., Bongio, M., Alghamdi, H. S., van den Beucken, J. J. J. P., Huysmans, M. C. D. N. J. M., Jansen, J. A., Hilborn, J. G., Ossipov, D. A., & Leeuwenburgh, S. C. G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.003 · Cited by 156
Recent advances in clay mineral-containing nanocomposite hydrogels
Zhao, L. Z., Zhou, C. H., Wang, J., Tong, D. S., Yu, W. H., & Wang, H. (2015) · Soft Matter · doi:10.1039/c5sm01277e · Cited by 154
Dynamic Coordination Chemistry Enables Free Directional Printing of Biopolymer Hydrogel
Shi, L., Carstensen, H., Hölzl, K., Lunzer, M., Li, H., Hilborn, J. G., Ovsianikov, A., & Ossipov, D. A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00128 · Cited by 153
Casuso, P., Odriozola, I., Vicente, A. P.-S., Loinaz, I., Cabañero, G., Grande, H., & Dupin, D. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00980 · Cited by 152
A Mathematical Model on the Resolution of Extrusion Bioprinting for the Development of New Bioinks
Suntornnond, R., Tan, E. Y. S., An, J., & Chua, C. (2016) · Materials · doi:10.3390/ma9090756 · Cited by 152
Water‐Enabled Healing of Conducting Polymer Films
Zhang, S., & Cicoira, F. (2017) · Advanced Materials · doi:10.1002/adma.201703098 · Cited by 150
Biomimetic Inks Based on Cellulose Nanofibrils and Cross-Linkable Xylans for 3D Printing
Markstedt, K., Escalante, A., Toríz, G., & Gatenholm, P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13400 · Cited by 148
Simulations of 3D bioprinting: predicting bioprintability of nanofibrillar inks
Göhl, J., Markstedt, K., Mark, A., Håkansson, K. M. O., Gatenholm, P., & Edelvik, F. (2018) · Biofabrication · doi:10.1088/1758-5090/aac872 · Cited by 148
Bioprinted chitosan-gelatin thermosensitive hydrogels using an inexpensive 3D printer
Roehm, K. D., & Madihally, S. V. (2017) · Biofabrication · doi:10.1088/1758-5090/aa96dd · Cited by 146
Vatankhah‐Varnoosfaderani, M., Hashmi, S., GhavamiNejad, A., & Stadler, F. J. (2013) · Polymer Chemistry · doi:10.1039/c3py00788j · Cited by 145
Zhang, K., Feng, Q., Xu, J., Xu, X., Tian, F., Yeung, K., & Bian, L. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701642 · Cited by 143
Fullenkamp, D. E., Barrett, D. G., Miller, D. R., Kurutz, J. W., & Messersmith, P. B. (2014) · RSC Advances · doi:10.1039/c4ra03178d · Cited by 141
Nano–Cell Interactions of Non-Cationic Bionanomaterials
Ho, L. W. C., Liu, Y., Han, R., Bai, Q., & Choi, C. H. J. (2019) · Accounts of Chemical Research · doi:10.1021/acs.accounts.9b00103 · Cited by 141
Truong, V. X., Li, F., Ercole, F., & Forsythe, J. S. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.8b00099 · Cited by 140
Critical role of zinc in hardening of Nereis jaws
Broomell, C. C., Mattoni, M. A., Zok, F. W., & Waite, J. H. (2006) · Journal of Experimental Biology · doi:10.1242/jeb.02373 · Cited by 138
Basu, S., Pacelli, S., Feng, Y., Lu, Q., Wang, J., & Paul, A. (2018) · ACS Nano · doi:10.1021/acsnano.8b02434 · Cited by 138
Rheological evaluation of Laponite/alginate inks for 3D extrusion-based printing
Dávila, J. L., & d’Ávila, M. A. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2876-y · Cited by 137
Peptide-Functionalized Oxime Hydrogels with Tunable Mechanical Properties and Gelation Behavior
Lin, F., Yu, J., Tang, W., Zheng, J., Defante, A. P., Guo, K., Wesdemiotis, C., & Becker, M. L. (2013) · Biomacromolecules · doi:10.1021/bm401133r · Cited by 136
3D Printing of Ultratough Polyion Complex Hydrogels
Zhu, F., Cheng, L., Yin, J., Wu, Z. L., Qian, J. W., Fu, J., & Zheng, Q. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09881 · Cited by 136
Abbadessa, A., Mouser, V. H. M., Blokzijl, M. M., Gawlitta, D., Dhert, W. J. A., Hennink, W. E., Malda, J., & Vermonden, T. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00366 · Cited by 135
On the Reactions of Thiols, Sulfenic Acids, and Sulfinic Acids with Hydrogen Peroxide
Chauvin, J. R., & Pratt, D. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201610402 · Cited by 134
Biomimetic adhesive containing nanocomposite hydrogel with enhanced materials properties
Skelton, S., Bostwick, M., O’Connor, K. S., Konst, S., Casey, S., & Lee, B. P. (2013) · Soft Matter · doi:10.1039/c3sm27352k · Cited by 133
Visible Light [2 + 2] Cycloadditions for Reversible Polymer Ligation
Marschner, D. E., Frisch, H., Offenloch, J. T., Tuten, B. T., Becer, C. R., Walther, A., Goldmann, A. S., Tzvetkova, P., & Barner‐Kowollik, C. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00613 · Cited by 133
Injectable Anisotropic Nanocomposite Hydrogels Direct in Situ Growth and Alignment of Myotubes
France, K. J. D., Yager, K. G., Chan, K. J. W., Corbett, B., Cranston, E. D., & Hoare, T. R. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03600 · Cited by 132
A self-healing PDMS elastomer based on acylhydrazone groups and the role of hydrogen bonds
Zhang, D., Ruan, Y., Zhang, B., Qiao, X., Deng, G., Chen, Y., & Liu, C. (2017) · Polymer · doi:10.1016/j.polymer.2017.05.060 · Cited by 131
Ma, X., Xu, T., Chen, W., Qin, H., Chi, B., & Ye, Z. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.071 · Cited by 131
Liu, K., Zang, S., Xue, R., Yang, J., Wang, L., Huang, J., & Yan, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18155 · Cited by 131
Tunable Pentapeptide Self‐Assembled β‐Sheet Hydrogels
Clarke, D. E., Parmenter, C. D. J., & Scherman, O. A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201801001 · Cited by 131
Liu, K. L., Zhang, Z., & Li, J. (2011) · Soft Matter · doi:10.1039/c1sm06340e · Cited by 130
Lu, G., Shang, W., Deng, H., Han, Z., Hu, M., Liang, X., Fang, C., Zhu, X., Fan, Y., & Tian, J. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.025 · Cited by 130
The Chemistry of Bioinspired Catechol(amine)-Based Coatings
Lyu, Q., Hsueh, N., & Chai, C. L. L. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00281 · Cited by 129
Khabibullin, A., Alizadehgiashi, M., Khuu, N., Prince, E., Tebbe, M., & Kumacheva, E. (2017) · Langmuir · doi:10.1021/acs.langmuir.7b02906 · Cited by 124
Role of Sacrificial Protein–Metal Bond Exchange in Mussel Byssal Thread Self-Healing
Schmitt, C. N. Z., Politi, Y., Reinecke, A., & Harrington, M. J. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00803 · Cited by 123
Shin, M., Galarraga, J. H., Kwon, M. Y., Lee, H., & Burdick, J. A. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.10.028 · Cited by 121
Guo, M., Jiang, M., Pispas, S., Yu, W., & Zhou, C. (2008) · Macromolecules · doi:10.1021/ma801975s · Cited by 119
Köpf, M., Campos, D. F. D., Blaeser, A., Sen, K. S., & Fischer, H. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025011 · Cited by 118
3D Printing Polymers with Supramolecular Functionality for Biological Applications
Pekkanen, A. M., Mondschein, R. J., Williams, C. B., & Long, T. E. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00671 · Cited by 118
Oxime Cross-Linked Injectable Hydrogels for Catheter Delivery
Grover, G., Braden, R. L., & Christman, K. (2013) · Advances in Materials · doi:10.1002/adma.201205234 · Cited by 117
Weak bond-based injectable and stimuli responsive hydrogels for biomedical applications
Ding, X., & Wang, Y. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb03052a · Cited by 117
Roy, N., Buhler, E., & Lehn, J. (2013) · Polymer International · doi:10.1002/pi.4646 · Cited by 116
Rheological behavior of alginate solutions for biomanufacturing
Rezende, R. A., Bártolo, P., Mendes, A., & Filho, R. M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30170 · Cited by 115
Mussel-Inspired Catechol-Functionalized Hydrogels and Their Medical Applications
Quan, W., Hu, Z., Liu, H., Ouyang, Q., Zhang, D., Li, S., Li, P., & Yang, Z. (2019) · Molecules · doi:10.3390/molecules24142586 · Cited by 114
Supramolecular Hybrid Hydrogel Based on Host–Guest Interaction and Its Application in Drug Delivery
Yu, J., Ha, W., Sun, J.-N., & Shi, Y.-P. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505649q · Cited by 113
Ingavle, G. C., Gionet‐Gonzales, M., Vorwald, C. E., Bohannon, L. K., Clark, K. C., Galuppo, L. D., & Leach, J. K. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.01.005 · Cited by 113
Quantitative optimization of solid freeform deposition of aqueous hydrogels
Kang, K. H., Hockaday, L. A., & Butcher, J. T. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035001 · Cited by 112
Injectable Polyplex Hydrogel for Localized and Long-Term Delivery of siRNA
Kim, Y., Park, M.-R., & Song, S. (2012) · ACS Nano · doi:10.1021/nn300842a · Cited by 112
Zhang, G., Chen, Y., Deng, Y., Ngai, T., & Wang, C. (2017) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00275 · Cited by 112
Kuang, L., Ma, X., Ma, Y., Yao, Y. X., Tariq, M., Yuan, Y., & Liu, C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03173 · Cited by 112
Hierarchical Hydrogen Bonds Directed Multi‐Functional Carbon Nanotube‐Based Supramolecular Hydrogels
Du, R., Wu, J., Chen, L., Huang, H., Zhang, X., & Zhang, J. (2013) · Small · doi:10.1002/smll.201302649 · Cited by 111
Protein-Induced Gold Nanoparticle Assembly for Improving the Photothermal Effect in Cancer Therapy
Wang, J., Zhang, Y., Jin, N., Mao, C., & Yang, M. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b21488 · Cited by 111
Sweeney, M., Campbell, L. L., Hanson, J. M., Pantoya, M. L., & Christopher, G. F. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1404-z · Cited by 110
Dynamic Supramolecular Hydrogels Spanning an Unprecedented Range of Host–Guest Affinity
Zou, L., Braegelman, A. S., & Webber, M. J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b22151 · Cited by 110
Cellulose Nanofibers for the Enhancement of Printability of Low Viscosity Gelatin Derivatives
Shin, S., Park, S.-H., Park, M., Jeong, E., Na, K., Youn, H. J., & Hyun, J. (2017) · BioResources · doi:10.15376/biores.12.2.2941-2954 · Cited by 109
Hafeez, S., Ooi, H. W., Morgan, F. L. C., Mota, C., Dettin, M., van Blitterswijk, C., Moroni, L., & Baker, M. B. (2018) · Gels · doi:10.3390/gels4040085 · Cited by 109
Blaeser, A., Campos, D. F. D., Weber, M. H., Neuß, S., Theek, B., Fischer, H., & Jahnen‐Dechent, W. (2013) · BioResearch open access · doi:10.1089/biores.2013.0031 · Cited by 107
Chen, Y., Wang, W., Wu, D., Nagao, M., Hall, D. G., Thundat, T. G., & Narain, R. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.7b01679 · Cited by 107
Bermejo-Velasco, D., Azémar, A., Oommen, O. P., Hilborn, J. G., & Varghese, O. P. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.8b01830 · Cited by 106
A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds
Tirella, A., Orsini, A. A., Vozzi, G., & Ahluwalia, A. D. (2009) · Biofabrication · doi:10.1088/1758-5082/1/4/045002 · Cited by 104
Baker, A. E. G., Tam, R. Y., & Shoichet, M. S. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b01422 · Cited by 104
Zechel, S., Hager, M. D., Priemel, T., & Harrington, M. J. (2019) · Biomimetics · doi:10.3390/biomimetics4010020 · Cited by 101
Zhang, L., Su, H., Wang, H., Li, Q., Li, X., Zhou, C., Xu, J., Chai, Y., Liang, X., Xiong, L., et al. (2019) · Theranostics · doi:10.7150/thno.30523 · Cited by 100
Guo, Z., Ni, K., Wei, D., & Ren, Y. (2015) · RSC Advances · doi:10.1039/c5ra03851k · Cited by 99
Modeling Process-Induced Cell Damage in the Biodispensing Process
Li, M., Tian, X., Zhu, N., Schreyer, D. J., & Chen, D. (2009) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2009.0178 · Cited by 99
Zhang, G., Lv, L., Deng, Y., & Wang, C. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201700018 · Cited by 99
Hydrogels Based on Dynamic Covalent and Non Covalent Bonds: A Chemistry Perspective
Picchioni, F., & Muljana, H. (2018) · Gels · doi:10.3390/gels4010021 · Cited by 99
Nanoclay-Based Self-Supporting Responsive Nanocomposite Hydrogels for Printing Applications
Jin, Y., Shen, Y., Yin, J., Qian, J. W., & Huang, Y. H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b00806 · Cited by 98
Self‐Healing Biomaterials: From Molecular Concepts to Clinical Applications
Diba, M., Spaans, S., Ning, K., Ippel, B. D., Yang, F., Loomans, B. A. C., Dankers, P. Y. W., & Leeuwenburgh, S. C. G. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800118 · Cited by 98
Injectable Supramolecular Hydrogel/Microgel Composites for Therapeutic Delivery
Chen, M. H., Chung, J. J., Mealy, J. E., Zaman, S., Li, E. C., Arisi, M. F., Atluri, P., & Burdick, J. A. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800248 · Cited by 98
Tang, Z., Jiang, F., Zhang, Y., Zhang, Y., YuanYang, Huang, X., Wang, Y., Zhang, D., Ni, N., Liu, F., et al. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.12.015 · Cited by 98
Vijayavenkataraman, S., Vialli, N., Fuh, J. Y. H., & Lu, W. F. (2019) · International Journal of Bioprinting · doi:10.18063/ijb.v5i2.1.229 · Cited by 97
Wu, D., Loh, X. J., Wu, Y., Lay, C. L., & Liu, Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja106639c · Cited by 96
Hydrogel Nanocomposites with Independently Tunable Rheology and Mechanics
Unterman, S. A., Charles, L. F., Strecker, S. E., Kramarenko, D., Pivovarchik, D., Edelman, E. R., & Artzi, N. (2017) · ACS Nano · doi:10.1021/acsnano.6b06730 · Cited by 95
On the external morphology of native cellulose microfibrils
Mazeau, K. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.12.016 · Cited by 94
Supramolecular Nanofibrillar Thermoreversible Hydrogel for Growth and Release of Cancer Spheroids
Li, Y., Khuu, N., Gevorkian, A., Sarjinsky, S., Thérien‐Aubin, H., Wang, Y., Cho, S., & Kumacheva, E. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201610353 · Cited by 94
Rheological Behavior of Fugitive Organic Inks for Direct-Write Assembly
Therriault, D., White, S. R., & Lewis, J. A. (2007) · Applied Rheology · doi:10.1515/arh-2007-0001 · Cited by 94
Development and in-vivo characterization of supramolecular hydrogels for intrarenal drug delivery
Dankers, P. Y. W., van Luyn, M. J. A., der Vlag, A. H., van Gemert, G. M. L., Petersen, A. H., Meijer, E. W., Janssen, H. M., Bosman, A. W., & Popa, E. R. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.03.052 · Cited by 93
Injectable, Guest–Host Assembled Polyethylenimine Hydrogel for siRNA Delivery
Wang, L. L., Sloand, J. N., Gaffey, A. C., Venkataraman, C. M., Wang, Z., Trubelja, A., Hammer, D. A., Atluri, P., & Burdick, J. A. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b01378 · Cited by 93
Reversibly Assembled Electroconductive Hydrogel via a Host–Guest Interaction for 3D Cell Culture
Xu, Y. X., Cui, M., Patsis, P. A., Günther, M., Yang, X., Eckert, K., & Zhang, Y. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b19482 · Cited by 93
Selective Proteolytic Degradation of Guest–Host Assembled, Injectable Hyaluronic Acid Hydrogels
Rodell, C. B., Wade, R. J., Purcell, B. P., Dusaj, N. N., & Burdick, J. A. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/ab5001673 · Cited by 92
Sarker, M. D., & Chen, D. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036226 · Cited by 92
Ghosh, M., Halperin‐Sternfeld, M., Grigoriants, I., Lee, J., Nam, K. T., & Adler‐Abramovich, L. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00876 · Cited by 92
Yoshinaga, N., Ishii, T., Naito, M., Endo, T., Uchida, S., Cabral, H., Osada, K., & Kataoka, K. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b08816 · Cited by 91
Chen, Y., Tan, Z., Wang, W., Peng, Y., & Narain, R. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01652 · Cited by 91
Zinc induced polyelectrolyte coacervate bioadhesive and its transition to a self-healing hydrogel
Wang, W., Xu, Y., Li, A., Li, T., Liu, M., von Klitzing, R., Ober, C. K., Kayitmazer, A. B., Li, L., & Guo, X. (2015) · RSC Advances · doi:10.1039/c5ra11915d · Cited by 90
Kang, Y., Tang, X., Yu, H., Cai, Z., Huang, Z., Wang, D., Xu, J., & Zhang, X. (2017) · Chemical Science · doi:10.1039/c7sc04125j · Cited by 90
Iwasaki, T., Tamai, Y., Yamamoto, M., Taniguchi, T., Kishikawa, K., & Kohri, M. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b02444 · Cited by 90
Wu, D., Wang, W., Diaz‐Dussan, D., Peng, Y., Chen, Y., Narain, R., & Hall, D. G. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b00769 · Cited by 90
2D and 3D-printing of self-healing gels: design and extrusion of self-rolling objects
Nadgorny, M., Xiao, Z., & Connal, L. A. (2017) · Molecular Systems Design & Engineering · doi:10.1039/c7me00023e · Cited by 88
Shin, M., & Lee, H. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02267 · Cited by 88
Increased Mixing Improves Hydrogel Homogeneity and Quality of Three-Dimensional Printed Constructs
Cohen, D. L., Lo, W. M., Tsavaris, A. M., Peng, D. H., Lipson, H., & Bonassar, L. J. (2010) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2010.0093 · Cited by 87
Highly Dynamic Nanocomposite Hydrogels Self‐Assembled by Metal Ion‐Ligand Coordination
Zhang, K., Yuan, W., Wei, K., Yang, B., Chen, X., Li, Z., Zhang, Z., & Bian, L. (2019) · Small · doi:10.1002/smll.201900242 · Cited by 86
Self-healing and photoluminescent carboxymethyl cellulose-based hydrogels
Chen, Y. M., Sun, L., Yang, S. A., Shi, L., Zheng, W. J., Zhao, W., & Hu, C. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.06.008 · Cited by 84
Shape fidelity and structure of 3D printed high consistency nanocellulose
Klar, V., Pere, J., Turpeinen, T., Kärki, P., Orelma, H., & Kuosmanen, P. (2019) · Scientific Reports · doi:10.1038/s41598-019-40469-x · Cited by 84
Self-healing response in supramolecular polymers based on reversible zinc–histidine interactions
Enke, M., Bode, S., Vitz, J., Schacher, F. H., Harrington, M. J., Hager, M. D., & Schubert, U. S. (2015) · Polymer · doi:10.1016/j.polymer.2015.03.068 · Cited by 83
Phage as versatile nanoink for printing 3-D cell-laden scaffolds
Lee, D.-Y., Lee, H., Kim, Y., Yoo, S. Y., Chung, W., & Kim, G. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.10.004 · Cited by 82
Tian, Z., Chen, C., & Allcock, H. R. (2013) · Macromolecules · doi:10.1021/ma4004314 · Cited by 82
Gangrade, A., & Mandal, B. B. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00416 · Cited by 81
Tan, C. S. Y., Liu, J., Groombridge, A. S., Barrow, S. J., Dreiss, C. A., & Scherman, O. A. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702994 · Cited by 80
Lee, J. M., & Yeong, W. Y. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.979557 · Cited by 79
Lee, M., Bae, K., Guillon, P., Chang, J. H., Arlov, Ø., & Zenobi‐Wong, M. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13166 · Cited by 79
Improving tumor chemotherapy effect using an injectable self-healing hydrogel as drug carrier
Yang, L., Li, Y., Gou, Y., Wang, X., Zhao, X., & Tao, L. (2017) · Polymer Chemistry · doi:10.1039/c7py00112f · Cited by 78
Cobalt Cross-Linked Redox-Responsive PEG Hydrogels: From Viscoelastic Liquids to Elastic Solids
Wegner, S. V., Schenk, F. C., Witzel, S., Bialas, F., & Spatz, J. P. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00574 · Cited by 77
Biocompatibility of Amine‐Functionalized Silica Nanoparticles: The Role of Surface Coverage
Hsiao, I., Fritsch‐Decker, S., Leidner, A., Al‐Rawi, M., Hug, V., Diabaté, S., Grage, S. L., Meffert, M., Stoeger, T., Gerthsen, D., et al. (2019) · Small · doi:10.1002/smll.201805400 · Cited by 74
Carbon Nanotube Reinforced Supramolecular Hydrogels for Bioapplications
Mihajlovic, M., Mihajlovic, M., Dankers, P. Y. W., Masereeuw, R., & Sijbesma, R. P. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800173 · Cited by 73
Nonswellable and Tough Supramolecular Hydrogel Based on Strong Micelle Cross-Linkings
Qin, Z., Yu, X., Wu, H., Li, J., Lv, H., & Yang, X. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00666 · Cited by 73
Three-dimensional cell-based bioprinting for soft tissue regeneration
Kim, J. H., Yoo, J. J., & Lee, S. J. (2016) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-016-0133-8 · Cited by 72
Self-citationFarahani, P. E., Adelmund, S. M., Shadish, J. A., & DeForest, C. A. (2017) · Journal of Materials Chemistry B · doi:10.1039/c6tb03400d · Cited by 72
STAPLE: Stable Alginate Gel Prepared by Linkage Exchange from Ionic to Covalent Bonds
Hong, S. H., Shin, M., Lee, J., Ryu, J. H., Lee, S., Yang, J. W., Kim, W. D., & Lee, H. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201400833 · Cited by 70
Self-citationShi, L., Han, Y., Hilborn, J. G., & Ossipov, D. (2016) · Chemical Communications · doi:10.1039/c6cc05565f · Cited by 70
3D-printing of dynamic self-healing cryogels with tuneable properties
Nadgorny, M., Collins, J., Xiao, Z., Scales, P. J., & Connal, L. A. (2017) · Polymer Chemistry · doi:10.1039/c7py01945a · Cited by 70
Tannic Acid Physically Cross‐Linked Responsive Hydrogel
Zheng, L., Shi, J., & Chi, Y. (2018) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201800234 · Cited by 70
Noncovalently Assembled Electroconductive Hydrogel
Xu, Y. X., Yang, X., Thomas, A. K., Patsis, P. A., Kurth, T., Kräter, M., Eckert, K., Bornhäuser, M., & Zhang, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01029 · Cited by 67
Rheological Properties of Cell-Hydrogel Composites Extruding Through Small-Diameter Tips
Cheng, J., Lin, F., Liu, H., Yan, Y., Wang, X., Zhang, R., & Xiong, Z. (2008) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2896215 · Cited by 66
Biomineralization‐Based Virus Shell‐Engineering: Towards Neutralization Escape and Tropism Expansion
Wang, X., Deng, Y., Li, S., Wang, G., Qin, E.-D., Xu, X., Tang, R., & Qin, C. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200034 · Cited by 65
Self-Healing Dynamic Hydrogel as Injectable Shock-Absorbing Artificial Nucleus Pulposus
Vicente, A. P.-S., Peroglio, M., Ernst, M., Casuso, P., Loinaz, I., Grande, H., Alini, M., Eglin, D., & Dupin, D. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00566 · Cited by 63
Liu, D., He, C., Poon, C. J., & Lin, W. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00751d · Cited by 62
Bioprinting a Synthetic Smectic Clay for Orthopedic Applications
Afewerki, S., Magalhães, L. S. S. M., Silva, A. D. R., Stocco, T. D., Silva-Filho, E. C., Marciano, F. R., & Lobo, A. O. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900158 · Cited by 61
Self-Assembling Hydrogels Based on a Complementary Host–Guest Peptide Amphiphile Pair
Redondo‐Gómez, C., Abdouni, Y., Becer, C. R., & Mata, Á. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00224 · Cited by 61
Martín, R., Rekondo, A., Echeberría, J., Cabañero, G., Grande, H. J., & Odriozola, I. (2012) · Chemical Communications · doi:10.1039/c2cc32030d · Cited by 60
Modulus-regulated 3D-cell proliferation in an injectable self-healing hydrogel
Li, Y., Zhang, Y., Shi, F., Tao, L., Wei, Y., & Wang, X. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2016.10.021 · Cited by 60
Supramolecular Polymer Hydrogels for Drug-Induced Tissue Regeneration
Cheng, J., Amin, D. R., Latona, J. A., Heber‐Katz, E., & Messersmith, P. B. (2019) · ACS Nano · doi:10.1021/acsnano.9b00281 · Cited by 59
Modulating stiffness with photo-switchable supramolecular hydrogels
Tabet, A., Forster, R. A., Parkins, C. C., Wu, G., & Scherman, O. A. (2018) · Polymer Chemistry · doi:10.1039/c8py01554f · Cited by 58
Wang, Y., Li, L., Kotsuchibashi, Y., Vshyvenko, S., Liu, Y., Hall, D. G., Zeng, H., & Narain, R. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00527 · Cited by 57
Gantar, A., Drnovšek, N., Casuso, P., Vicente, A. P.-S., Rodríguez, J., Dupin, D., Novak, S., & Loinaz, I. (2016) · RSC Advances · doi:10.1039/c6ra17327f · Cited by 56
Three-Dimensional Cell Printing of Large-Volume Tissues: Application to Ear Regeneration
Lee, J., Kim, B. S., Seo, D., Park, J., & Cho, D. (2017) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2016.0362 · Cited by 56
Tissue specific microenvironments: a key tool for tissue engineering and regenerative medicine
Sachs, P. C., Mollica, P. A., & Bruno, R. D. (2017) · Journal of Biological Engineering · doi:10.1186/s13036-017-0077-0 · Cited by 56
Multiphoton 3D Printing of Biopolymer-Based Hydrogels
Parkatzidis, K., Chatzinikolaidou, Μ., Kaliva, M., Bakopoulou, A., Farsari, M., & Vamvakaki, M. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01300 · Cited by 56
Supramolecular Nested Microbeads as Building Blocks for Macroscopic Self‐Healing Scaffolds
Yu, Z., Liu, J., Tan, C. S. Y., et al. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711522 · Cited by 55
pH-Responsive robust polymer micelles with metal–ligand coordinated core cross-links
Hwang, G. H., Min, K. H., Lee, H. J., Nam, H. Y., Choi, G. H., Kim, B. J., Jeong, S. Y., & Lee, S. C. (2014) · Chemical Communications · doi:10.1039/c4cc01584c · Cited by 54
Self-citationGrindy, S. C., & Holten‐Andersen, N. (2017) · Soft Matter · doi:10.1039/c7sm00617a · Cited by 54
Sy, S. K. H., Ho, L. W. C., Lau, W. C. Y., Ko, H., & Choi, C. H. J. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b02572 · Cited by 54
Wang, X., He, K., & Zhang, W. (2013) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911513491359 · Cited by 52
Lopez-Perez, P. M., da Silva, R. M. P., Strehin, I. A., Kouwer, P. H. J., Leeuwenburgh, S. C. G., & Messersmith, P. B. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01417 · Cited by 52
Development of clay based novel bio-ink for 3D bio-printing process
Habib, M. A., & Khoda, B. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.07.105 · Cited by 52
A kinetic study of the air oxidation of pyrogallol and purpurogallin
Abrash, H. I., Shih, D., Elias, W., & Malekmehr, F. (1989) · International Journal of Chemical Kinetics · doi:10.1002/kin.550210609 · Cited by 51
Nojoomi, A., Tamjid, E., Simchi, A., Bonakdar, S., & Stroeve, P. (2016) · International Journal of Polymeric Materials · doi:10.1080/00914037.2016.1182914 · Cited by 50
Cyclodextrin Rotaxanes and Polyrotaxanes
Wenz, G., Han, B., & Mueller, A. (2006) · ChemInform · doi:10.1002/chin.200624257 · Cited by 50
Enke, M., Jehle, F., Bode, S., Vitz, J., Harrington, M. J., Hager, M. D., & Schubert, U. S. (2017) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201600458 · Cited by 48
An injectable ionic hydrogel inducing high temperature hyperthermia for microwave tumor ablation
Wang, J., Wang, D., Yan, H., Tao, L., Wei, Y., Li, Y., Wang, X., Zhao, W., Zhang, Y., Zhao, L., et al. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb00556c · Cited by 48
Dynamic supramolecular polymers built from cucurbit[n]urils and viologens
Correia, H. D., Chowdhury, S., Ramos, A. P., Guy, L., Demets, G. J., & Bucher, C. (2018) · Polymer International · doi:10.1002/pi.5709 · Cited by 48
Aurophilically cross-linked “dynamic” hydrogels mimicking healthy synovial fluid properties
Casuso, P., Vicente, A. P.-S., Iribar, H., Gutiérrez‐Rivera, A., Izeta, A., Loinaz, I., Cabañero, G., Grande, H., Odriozola, I., & Dupin, D. (2014) · Chemical Communications · doi:10.1039/c4cc05735j · Cited by 47
Benzoboroxoles: Synthesis and applications in medicinal chemistry
Mereddy, G. R., Chakradhar, A., Rutkoski, R., & Jonnalagadda, S. C. (2018) · Journal of Organometallic Chemistry · doi:10.1016/j.jorganchem.2018.03.017 · Cited by 47
Lee, H. J., Le, P. T., Kwon, H. J., & Park, K. D. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb00072k · Cited by 47
Yan, K. C., Nair, K., & Sun, W. (2010) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2009.12.018 · Cited by 46
Tao, Z., Peng, K., Fan, Y., Liu, Y., & Yang, H. (2016) · Polymer Chemistry · doi:10.1039/c5py01742d · Cited by 46
Schupp, D. J., Zhang, X., Sun, S., & Cölfen, H. (2019) · Chemical Communications · doi:10.1039/c8cc08986h · Cited by 45
Zou, L., & Webber, M. J. (2019) · Chemical Communications · doi:10.1039/c9cc04748d · Cited by 45
Hu, Y., Liu, X., Cai, Z., Zhang, H., Gao, H., He, W., Wu, P., Cai, C., Zhu, J., & Yan, Z. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b04299 · Cited by 44
Guilbaud‐Chéreau, C., Dinesh, B., Schurhammer, R., Collin, D., Bianco, A., & Ménard‐Moyon, C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b02482 · Cited by 44
Jing, B., Chen, X., Wang, X., Zhao, Y., & Qiu, H. (2008) · ChemPhysChem · doi:10.1002/cphc.200700625 · Cited by 43
Fabrication and characterization of a novel collagen-catechol hydrogel
Duan, L., Yuan, Q., Xiang, H., Yang, X. P., Liu, L., & Li, J. (2017) · Journal of Biomaterials Applications · doi:10.1177/0885328217747125 · Cited by 43
Huang, W., Qi, C., & Gao, Y. (2019) · ACS Applied Nano Materials · doi:10.1021/acsanm.9b00936 · Cited by 42
Strong poly(ethylene oxide) based gel adhesives via oxime cross-linking
Ghosh, S., Cabral, J. D., Hanton, L. R., & Moratti, S. C. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.10.018 · Cited by 41
Liu, Y., & Lee, B. P. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb01828a · Cited by 41
Lopez-Heredia, M. A., Łapa, A., Mendes, A. C. L., et al. (2017) · Materials Letters · doi:10.1016/j.matlet.2016.12.122 · Cited by 41
Liu, Y., Zhou, G., Liu, Z., Guo, M., Jiang, X., Taskin, M. B., Zhang, Z., Liu, J., Tang, J., Bai, R., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-08572-z · Cited by 41
Liu, C., McClements, D. J., Li, M., Xiong, L., & Sun, Q. (2019) · Journal of Agricultural and Food Chemistry · doi:10.1021/acs.jafc.9b01649 · Cited by 40
Controllable Supramolecular Polymerization Promoted by Host-Enhanced Photodimerization
Kang, Y., Cai, Z., Huang, Z., Tang, X., Xu, J., & Zhang, X. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.6b00871 · Cited by 39
Preparation and self-healing behaviors of poly(acrylic acid)/cerium ions double network hydrogels
Zhou, H., Xu, G., Li, J., Zeng, S., Zhang, X., Zheng, Z., Ding, X., Chen, W., Wang, Q., & Zhang, W. (2015) · Macromolecular Research · doi:10.1007/s13233-015-3145-7 · Cited by 36
Wang, S., Nawale, G. N., Oommen, O. P., Hilborn, J. G., & Varghese, O. P. (2019) · Polymer Chemistry · doi:10.1039/c9py00862d · Cited by 36
Adraa, K. E., Timón, V., Lambert, J., Al-Rabaa, A. R., Jaber, F., Jaber, M., & Tielens, F. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3094148 · Cited by 31
Kraut, G., Yenchesky, L., Prieto, F., Tovar, G. E. M., & Southan, A. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45083 · Cited by 31
Wada, N., Horiuchi, N., Nakamura, M., Nozaki, K., Nagai, A., & Yamashita, K. (2018) · ACS Omega · doi:10.1021/acsomega.8b02445 · Cited by 31
Cobalt-Cross-Linked, Redox-Responsive Spy Network Protein Hydrogels
Kou, S., Yang, X., Yang, Z., Liu, X., Wegner, S. V., & Sun, F. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.9b00333 · Cited by 29
Serres-Gómez, M., González‐Gaitano, G., Kaldybekov, D. B., Mansfield, E. D. H., Khutoryanskiy, V. V., Isasi, J. R., & Dreiss, C. A. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b01744 · Cited by 27
Mandal, K., & Jana, N. R. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b00673 · Cited by 26
Kootala, S., Ossipov, D. A., van den Beucken, J. J. J. P., Leeuwenburgh, S. C. G., & Hilborn, J. G. (2015) · Biomaterials Science · doi:10.1039/c5bm00096c · Cited by 25
Niu, Y., Yuan, X., Zhao, Y., Zhang, W., & Ren, L. (2017) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201600540 · Cited by 25
Jiang, D., Wang, G., Zheng, F. J., Han, J., & Wu, X. (2014) · Polymer Chemistry · doi:10.1039/c4py01158a · Cited by 24
Nasiri, S.-S., Salami‐Kalajahi, M., Roghani‐Mamaqani, H., & Dehghani, E. (2018) · Inorganica Chimica Acta · doi:10.1016/j.ica.2018.02.027 · Cited by 24
One-Step Fabrication of Biocompatible Multifaceted Nanocomposite Gels and Nanolayers
Topuz, F., Bartneck, M., Pan, Y., & Tacke, F. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b01483 · Cited by 23
Cited by
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
Alavarse, A. C., Frachini, E. C. G., da Silva, R. L. C. G., Lima, V. H., Shavandi, A., & Petri, D. F. S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.01.029 · Cited by 395
Bom, S., Ribeiro, R., Ribeiro, H. M., Santos, C., & Marto, J. (2022) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2022.121506 · Cited by 230
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Rapid digital light 3D printing enabled by a soft and deformable hydrogel separation interface
Wu, J., Guo, J., Linghu, C., Lu, Y., Song, J., Xie, T., & Zhao, Q. (2021) · Nature Communications · doi:10.1038/s41467-021-26386-6 · Cited by 109
Metadata
- Authors
- Lee, S. C., Gillispie, G., Prim, P., & Lee, S. J.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-20
- Volume
- 120
- Issue
- 19
- Pages
- 10834-10886
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W3080402642
- Cited by
- 255
- References
- 412
- FWCI
- 2.63
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.