The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Precise stacking of decellularized extracellular matrix based 3D cell-laden constructs by a 3D cell printing system equipped with heating modules
Open accessAbstract
Three-dimensional (3D) cell printing systems allow the controlled and precise deposition of multiple cells in 3D constructs. Hydrogel materials have been used extensively as printable bioinks owing to their ability to safely encapsulate living cells. However, hydrogel-based bioinks have drawbacks for cell printing, e.g. inappropriate crosslinking and liquid-like rheological properties, which hinder precise 3D shaping. Therefore, in this study, we investigated the influence of various factors (e.g. bioink concentration, viscosity, and extent of crosslinking) on cell printing and established a new 3D cell printing system equipped with heating modules for the precise stacking of decellularized extracellular matrix (dECM)-based 3D cell-laden constructs. Because the pH-adjusted bioink isolated from native tissue is safely gelled at 37 °C, our heating system facilitated the precise stacking of dECM bioinks by enabling simultaneous gelation during printing. We observed greater printability compared with that of a non-heating system. These results were confirmed by mechanical testing and 3D construct stacking analyses. We also confirmed that our heating system did not elicit negative effects, such as cell death, in the printed cells. Conclusively, these results hold promise for the application of 3D bioprinting to tissue engineering and drug development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
Self-citationJang, J., Park, H.-J., Kim, S.-W., Kim, H., Park, J. Y., Na, S. J., Kim, H. J., Park, M. N., Choi, S. H., Park, S. H., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.026 · Cited by 673
Self-citationA hydrogel derived from decellularized dermal extracellular matrix
Wolf, M. T., Daly, K. A., Brennan-Pierce, E. P., Johnson, S. A., Carruthers, C. A., D'Amore, A., Nagarkar, S. P., Velankar, S. S., & Badylak, S. F. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.06.051 · Cited by 482
Biomimetic 3D tissue printing for soft tissue regeneration
Pati, F., Ha, D.-H., Jang, J., Han, H. H., Rhie, J.-W., & Cho, D.-W. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.043 · Cited by 368
Self-citation3D cell printing of functional skeletal muscle constructs using skeletal muscle-derived bioink
Choi, Y., Kim, T. G., Jeong, J., Yi, H., Park, J. W., Hwang, W., & Cho, D. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600483 · Cited by 298
Self-citation
Cited by
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Recent trends in bioinks for 3D printing
Gopinathan, J., & Noh, I. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0122-1 · Cited by 846
Recent Advances in Extrusion‐Based 3D Printing for Biomedical Applications
Placone, J. K., & Engler, A. J. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701161 · Cited by 486
Kim, B. S., Das, S., Jang, J., & Cho, D.-W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00808 · Cited by 465
Self-citationAssessment methodologies for extrusion-based bioink printability
Gillispie, G., Prim, P., Copus, J., Fisher, J., Mikos, A. G., Yoo, J. J., Atala, A., & Lee, S. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6f0d · Cited by 426
Self-citation
Metadata
- Authors
- Ahn, G., Min, K.-H., Kim, C., Lee, J.-S., Kang, D., Won, J.-Y., Cho, D.-W., Kim, J.-Y., Jin, S., Yun, W.-S., & Shim, J.-H.
- Venue
- Scientific Reports
- Published
- 2017-08-17
- Volume
- 7
- Issue
- 1
- Pages
- 8624-8624
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2744165244
- Cited by
- 165
- References
- 5
- FWCI
- 6.63
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Precise stacking of decellularized extracellular matrix based 3D cell-laden constructs by a 3D cell printing system equipped with heating modules. https://app.cochat.ai/papers/10.1038/s41598-017-09201-5
- The paper
- Ahn, G., Min, K.-H., Kim, C., Lee, J.-S., Kang, D., Won, J.-Y., Cho, D.-W., Kim, J.-Y., Jin, S., Yun, W.-S., & Shim, J.-H. (2017). Precise stacking of decellularized extracellular matrix based 3D cell-laden constructs by a 3D cell printing system equipped with heating modules. Scientific Reports. https://doi.org/10.1038/s41598-017-09201-5
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.