The DOI matches its Crossref record; 247 of the 247 references it cites were found in a registry or an index.
Approaching Practically Accessible Solid-State Batteries: Stability Issues Related to Solid Electrolytes and Interfaces
Abstract
Solid-state batteries have been attracting wide attention for next generation energy storage devices due to the probability to realize higher energy density and superior safety performance compared with the state-of-the-art lithium ion batteries. However, there are still intimidating challenges for developing low cost and industrially scalable solid-state batteries with high energy density and stable cycling life for large-scale energy storage and electric vehicle applications. This review presents an overview on the scientific challenges, fundamental mechanisms, and design strategies for solid-state batteries, specifically focusing on the stability issues of solid-state electrolytes and the associated interfaces with both cathode and anode electrodes. First, we give a brief overview on the history of solid-state battery technologies, followed by introduction and discussion on different types of solid-state electrolytes. Then, the associated stability issues, from phenomena to fundamental understandings, are intensively discussed, including chemical, electrochemical, mechanical, and thermal stability issues; effective optimization strategies are also summarized. State-of-the-art characterization techniques and in situ and operando measurement methods deployed and developed to study the aforementioned issues are summarized as well. Following the obtained insights, perspectives are given in the end on how to design practically accessible solid-state batteries in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–247 of 247
Gao, Y., Wang, D., Li, Y. C., Yu, Z., Mallouk, T. E., & Wang, D. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201807304 · Cited by 179
Influence of sputtering conditions on ionic conductivity of LiPON thin films
Hamon, Y., Douard, A., Sabary, F., Marcel, C., Vinatier, P., Pecquenard, B., & Levasseur, A. (2005) · Solid State Ionics · doi:10.1016/j.ssi.2005.10.021 · Cited by 178
X-ray study of the deficient perovskite
Abe, M., & Uchino, K. (1974) · Materials Research Bulletin · doi:10.1016/0025-5408(74)90194-9 · Cited by 164
Stabilizing interface between Li10SnP2S12 and Li metal by molecular layer deposition
Wang, C., Zhao, Y., Sun, Q., Li, X., Liu, Y., Liang, J., Li, X., Lin, X., Li, R., Adair, K. R., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.08.030 · Cited by 162
Practical evaluation of energy densities for sulfide solid-state batteries
Liu, L., Xu, J., Wang, S., Wu, F., Li, H., & Chen, L. (2019) · eTransportation · doi:10.1016/j.etran.2019.100010 · Cited by 162
Self-citationIn-situ visualization of lithium plating in all-solid-state lithium-metal battery
Li, Q., Yi, T., Wang, X., Pan, H., Quan, B., Liang, T., Guo, X., Yu, X., Wang, H., Huang, X., et al. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.103895 · Cited by 159
Self-citationLiang, J., Li, X., Zhao, Y., Goncharova, L. V., Li, W., Adair, K. R., Banis, M. N., Hu, Y., Sham, T., Huang, H., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902125 · Cited by 157
Rajendra, H. B., Ito, T., & Yamada, H. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0841704jes · Cited by 154
Ma, J., Liu, Z., Chen, B., Wang, L., Yue, L., Liu, H., Zhang, J., Liu, Z., & Cui, G. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0221714jes · Cited by 150
Mechanical properties of sulfide glasses in all-solid-state batteries
Kato, A., Nose, M., Yamamoto, M., Sakuda, A., Hayashi, A., & Tatsumisago, M. (2018) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.18022 · Cited by 146
Mechanical properties of the solid Li-ion conducting electrolyte: Li0.33La0.57TiO3
Cho, Y., Wolfenstine, J., Rangasamy, E., Kim, H., Choe, H., & Sakamoto, J. S. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6500-5 · Cited by 143
Crystal Structure of a Lithium Ion-Conducting Perovskite La2/3−xLi3xTiO3 (x=0.05)
Inaguma, Y., Katsumata, T., Itoh, M., & Morii, Y. (2002) · Journal of Solid State Chemistry · doi:10.1006/jssc.2002.9560 · Cited by 136
Stabilizing Li10SnP2S12/Li Interface via an in Situ Formed Solid Electrolyte Interphase Layer
Zheng, B., Zhu, J., Wang, H., Feng, M., Umeshbabu, E., Li, Y., Wu, Q., & Yang, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08860 · Cited by 129
Brazier, A., Dupont, L., Laffont, L., Kuwata, N., Kawamura, J., & Tarascon, J. ‐. (2008) · Chemistry of Materials · doi:10.1021/cm7033933 · Cited by 128
Hofstetter, K., Samson, A. J., Narayanan, S., & Thangadurai, V. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.016 · Cited by 127
Galven, C., Dittmer, J., Suard, E., Berre, F. L., & Crosnier‐Lopez, M. (2012) · Chemistry of Materials · doi:10.1021/cm300964k · Cited by 125
Wang, C., Li, X., Zhao, Y., Banis, M. N., Liang, J., Li, X., Sun, Y., Adair, K. R., Sun, Q., Liu, Y., et al. (2019) · Small Methods · doi:10.1002/smtd.201900261 · Cited by 123
Lithium location in NASICON-type Li+ conductors by neutron diffraction. I. Triclinic α′-LiZr2(PO4)3
Catti, M. (1999) · Solid State Ionics · doi:10.1016/s0167-2738(99)00089-2 · Cited by 122
Nakamura, T., Amezawa, K., Kulisch, J., Zeier, W. G., & Janek, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03053 · Cited by 118
Stability of garnet-type Li ion conductors: An overview
Duan, H., Zheng, H., Zhou, Y., Xu, B., & Liu, H. (2017) · Solid State Ionics · doi:10.1016/j.ssi.2017.09.018 · Cited by 115
Riphaus, N., Stiaszny, B., Beyer, H., Indris, S., Gasteiger, H. A., & Sedlmaier, S. J. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0351906jes · Cited by 113
Murugan, R., Weppner, W., Schmid‐Beurmann, P., & Thangadurai, V. (2007) · Materials Science and Engineering B · doi:10.1016/j.mseb.2007.07.009 · Cited by 109
Kim, H., Oh, Y., Kang, K. H., Kim, J. H., Kim, J., & Yoon, C. S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15305 · Cited by 109
Ma, Q., Qi, X., Tong, B., Zheng, Y., Feng, W., Nie, J., Hu, Y., Li, H., Huang, X., Chen, L., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10597 · Cited by 103
Self-citationOkumura, T., Nakatsutsumi, T., Ina, T., Orikasa, Y., Arai, H., Fukutsuka, T., Iriyama, Y., Uruga, T., Tanida, H., Uchimoto, Y., et al. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04366d · Cited by 102
Safety of solid-state Li metal battery: Solid polymer versus liquid electrolyte
Péréa, A., Dontigny, M., & Zaghib, K. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.061 · Cited by 102
Sang, L., Bassett, K. L., Castro, F. C., Young, M. J., Chen, L., Haasch, R. T., Elam, J. W., Dravid, V. P., Nuzzo, R. G., & Gewirth, A. A. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b02368 · Cited by 100
Self-citationBuilding an Interfacial Framework: Li/Garnet Interface Stabilization through a Cu 6 Sn 5 Layer
Feng, W., Dong, X., Lai, Z., Zhang, X., Wang, Y., Wang, C., Luo, J., & Xia, Y. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01158 · Cited by 99
Li4-Sb Sn1-S4 solid solutions for air-stable solid electrolytes
Zhang, Z., Zhang, J., Sun, Y., Jia, H., Peng, L., Zhang, Y., & Xie, J. (2019) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2019.05.015 · Cited by 99
Investigations on PVC/PAN composite polymer electrolytes
Rajendran, S. L., Babu, R. S., & Sivakumar, P. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.02.007 · Cited by 96
Effect of Electrochemical Charging on Elastoplastic Properties and Fracture Toughness of LiXCoO2
Swallow, J. G., Woodford, W. H., McGrogan, F. P., Ferralis, N., Chiang, Y., & Vliet, K. J. V. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0141411jes · Cited by 91
Aono, H., Sugimoto, E., Sadaoka, Y., Imanaka, N., & Adachi, G. (1992) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.65.2200 · Cited by 87
Yoshima, K., Harada, Y., & Takami, N. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.031 · Cited by 78
Yamamoto, K., Iriyama, Y., Asaka, T., Hirayama, T., Fujita, H., Nonaka, K., Miyahara, K., Sugita, Y., & Ogumi, Z. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.04.013 · Cited by 77
pH sensors with lithium lanthanum titanate sensitive material: applications in food industry
Bohnké, C., Duroy, H., & Fourquet, J. L. (2003) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(02)00473-2 · Cited by 76
Compatibility study of oxide and olivine cathode materials with lithium aluminum titanium phosphate
Gellert, M., Dashjav, E., Grüner, D., Ma, Q., & Tietz, F. (2017) · Ionics · doi:10.1007/s11581-017-2276-6 · Cited by 74
Seki, S., Kobayashi, Y., Miyashiro, H., Yamanaka, A., Mita, Y., & Iwahori, T. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.072 · Cited by 72
Losilla, E. R., Aranda, M. Á. G., Martínez-Lara, M., & Bruque, S. (1997) · Chemistry of Materials · doi:10.1021/cm970078n · Cited by 69
Hori, S., Suzuki, K., Hirayama, M., Kato, Y., & Kanno, R. (2016) · Frontiers in Energy Research · doi:10.3389/fenrg.2016.00038 · Cited by 69
Dashjav, E., Ma, Q., Qu, X., Tsai, C., Giarola, M., Mariotto, G., & Tietz, F. (2018) · Solid State Ionics · doi:10.1016/j.ssi.2018.04.010 · Cited by 63
Boulant, A., Bardeau, J., Jouanneaux, A., Emery, J., Buzaré, J., & Bohnké, O. (2010) · Dalton Transactions · doi:10.1039/b924684c · Cited by 62
Chemistry Design Towards a Stable Sulfide‐Based Superionic Conductor Li4Cu8Ge3S12
Wang, Y., Lü, X., Zheng, C., Liu, X., Chen, Z., Yang, W., Lin, J., & Huang, F. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201901739 · Cited by 57
Solid Electrolyte Interphase (SEI) Electrodes. Part 1. The Kinetics of Lithium in LiAlCl4‐SOCl2
Peled, E., & Yamin, H. (1979) · Israel Journal of Chemistry · doi:10.1002/ijch.197900016 · Cited by 56
Study of Li1 + xAlxTi2 − x(PO4)3 for Li+ potentiometric sensors
Cretin, M., Fabry, P., & ABELLO, L. (1995) · Journal of the European Ceramic Society · doi:10.1016/0955-2219(95)00079-a · Cited by 44
Robinson, J. P., Kichambare, P., Deiner, J., Miller, R., Rottmayer, M. A., & Koenig, G. M. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.15294 · Cited by 40
Narayanan, S., Ramezanipour, F., & Thangadurai, V. (2015) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b00972 · Cited by 39
Builes, D. H., Hernandez-Ortiz, J. P., Corcuera, M. Á., Mondragòn, I., & Tercjak, A. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4046266 · Cited by 34
Cited by
The timescale identification decoupling complicated kinetic processes in lithium batteries
Lu, Y., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2022) · Joule · doi:10.1016/j.joule.2022.05.005 · Cited by 2,378
Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries
Wu, F., Maier, J., & Yu, Y. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00863e · Cited by 2,229
A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards
Chen, Y., Kang, Y., Zhao, Y., Wang, L., Liu, J., Li, Y., Liang, Z., He, X., Li, X., Tavajohi, N., et al. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.10.017 · Cited by 2,178
Tailoring inorganic–polymer composites for the mass production of solid-state batteries
Fan, L.-Z., He, H., & Nan, C.-W. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00320-0 · Cited by 1,034
Zheng, Y., Yao, Y., Ou, J., Li, M., Luo, D., Dou, H., Li, Z., Amine, K., Yu, A., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00305k · Cited by 1,030
Metadata
- Authors
- Chen, R., Li, Q., Yu, X., Chen, L., & Li, H.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-11-25
- Volume
- 120
- Issue
- 14
- Pages
- 6820-6877
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W2991243995
- Cited by
- 1,678
- References
- 247
- FWCI
- 7.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.