Effect of an Electrospray-Generated Ionomer Morphology on Polymer Electrolyte Fuel Cell Performance
Open accessThe DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
Oxygen transport is a serious limiting factor on the performance of polymer electrolyte fuel cells (PEFCs). In the present study, without modification of either the chemical structure of the ionomer or the Pt surface, the oxygen transport resistance in ionomer films (RCL,film) was successfully mitigated via a newly developed electrospray (ES) catalyst layer (CL) preparation. We prepared the CL according to two different ionization modes [positive ionization mode (ESP) and negative ionization mode (ESN)] and ionomer/carbon mass ratios (I/C) of 0.3 and 0.7. The ionomer morphology revealed differences according to the ionization mode, as analyzed by scanning transmission electron microscopy. Spherical and dendritic ionomer morphologies were observed resulting from ESP and ESN, respectively. To quantitatively estimate RCL,film values, limiting current measurements were used. Consequently, the CL prepared by ESN exhibited the lowest RCL,film value compared to that for the conventional pulse-swirl-spray (PSS) method and ESP (I/C 0.3 PSS, 61; ESP, 94; ESN, 40 s m–1; and I/C 0.7 PSS, 68; ESP, 66; ESN, 46 s m–1). Moreover, the difference in the ionomer morphology not only influenced the mass activity at low current density but also helped to implement superior performance at high current density. Therefore, it was confirmed that the decreased thickness of the ionomer film covering the surface of the catalyst with ESN decreased RCL,film by a factor of 1.5 and, as a result, improved the overall PEFC performance by the same factor.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Inkjet printing and spray coating generally need a low viscous ink (e.g., 4.9 mPa s) to avoid blocking the spraying nozzle and decrease the structural defects in the CLs, for example, the ink with a viscosity of 25.3 mPa s [67] may result in the nozzle clogging, making it hard to control the amount of ink sprayed.”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [67]
In the citing paper
“spray coating usually needs a lower catalyst content (the solid concentration is commonly less than 3 wt.%,e.g., ~0.6 wt.% [36], ~1.8 wt.% [104], or 2.5 wt.% [67]) to avoid the blockage of spraying nozzle”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [67]
In the citing paper
“During spray coating, some spraying parameters influence the morphology and structure of the CL and hence the performance of the cell, such as the nozzle height [104], electrospray mode [67], or spraying voltage [163].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [67]
In the citing paper
“The CL fabricated by the electrospray with negative ionization mode shows a decreased thickness of ionomer film covering catalysts, which will reduce the local gas transport resistance through the ionomer film.”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [67]
In the citing paper
“Seonghun et al. [67] found that the ionization mode of electrospray has an influence on the morphology of ionomer and then impacts the ionomer film covering catalysts.”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [67]
Citations
Cites
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
On the evaporation of small ions from charged droplets
Iribarne, J. V., & Thomson, B. A. (1976) · The Journal of Chemical Physics · doi:10.1063/1.432536 · Cited by 1,281
Kongkanand, A., & Mathias, M. F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00216 · Cited by 1,202
Electrospray: From ions in solution to ions in the gas phase, what we know now
Kebarle, P., & Verkerk, U. H. (2009) · Mass Spectrometry Reviews · doi:10.1002/mas.20247 · Cited by 905
Unraveling the Mechanism of Electrospray Ionization
Konermann, L., Ahadi, E., Rodriguez, A. D., & Vahidi, S. (2013) · Analytical Chemistry · doi:10.1021/ac302789c · Cited by 735
Makharia, R., Mathias, M. F., & Baker, D. R. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1888367 · Cited by 514
Analysis of Oxygen-Transport Diffusion Resistance in Proton-Exchange-Membrane Fuel Cells
Nonoyama, N., Okazaki, S., Weber, A. Z., Ikogi, Y., & Yoshida, T. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3546038 · Cited by 512
Measurement of Oxygen Transport Resistance in PEM Fuel Cells by Limiting Current Methods
Baker, D. R., Caulk, D. A., Neyerlin, K. C., & Murphy, M. W. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3152226 · Cited by 510
Park, Y.-C., Tokiwa, H., Kakinuma, K., Watanabe, M., & Uchida, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.091 · Cited by 389
Self-citationOhma, A., Shinohara, K., Iiyama, A., Yoshida, T., & Daimaru, A. (2011) · ECS Transactions · doi:10.1149/1.3635611 · Cited by 341
Mechanism of Charging and Supercharging Molecules in Electrospray Ionization
Iavarone, A. T., & Williams, E. R. (2003) · Journal of the American Chemical Society · doi:10.1021/ja021202t · Cited by 324
Lefebvre, M. C. (1999) · Electrochemical and Solid-State Letters · doi:10.1149/1.1390804 · Cited by 278
Think Negative: Finding the Best Electrospray Ionization/MS Mode for Your Analyte
Liigand, P., Kaupmees, K., Haav, K., Liigand, J., Leito, I., Girod, M., Antoine, R., & Kruve, A. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b00096 · Cited by 159
Xing, L., Das, P. K., Song, X., Mamlouk, M., & Scott, K. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.10.011 · Cited by 147
PEFC catalyst layer: Recent advances in materials, microstructural characterization, and modeling
Karan, K. (2017) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2017.08.018 · Cited by 142
Ahadi, E., & Konermann, L. (2011) · The Journal of Physical Chemistry B · doi:10.1021/jp209344z · Cited by 123
Inherent Acidity of Perfluorosulfonic Acid Ionomer Dispersions and Implications for Ink Aggregation
Berlinger, S. A., McCloskey, B. D., & Weber, A. Z. (2018) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.8b06493 · Cited by 122
On the Formation of Highly Charged Gaseous Ions from Unfolded Proteins by Electrospray Ionization
Konermann, L., Rodriguez, A. D., & Liu, J. (2012) · Analytical Chemistry · doi:10.1021/ac301298g · Cited by 122
Xing, L., Mamlouk, M., Kumar, R., & Scott, K. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.03.225 · Cited by 115
Nano-scale control of the ionomer distribution by molecular masking of the Pt surface in PEMFCs
Doo, G., Yuk, S., Lee, J. H., Choi, S., Lee, D.-H., Lee, D. W., Hyun, J., Kwon, S. H., Lee, S. G., & Kim, H.-T. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta14002f · Cited by 99
Interesting Facets of Surface, Interfacial, and Bulk Characteristics of Perfluorinated Ionomer Films
Karan, K. (2019) · Langmuir · doi:10.1021/acs.langmuir.8b03721 · Cited by 96
Liu, Y., Ji, C., Gu, W., Baker, D. R., Jorne, J., & Gasteiger, H. A. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3435323 · Cited by 86
PEMFC electrode preparation by electrospray: Optimization of catalyst load and ionomer content
Chaparro, A. M., Gallardo, B., Folgado, M. A., Martín, A. J., & Daza, L. (2009) · Catalysis Today · doi:10.1016/j.cattod.2008.12.003 · Cited by 80
Shimizu, R., Park, Y.-C., Kakinuma, K., Iiyama, A., & Uchida, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0071806jes · Cited by 79
Self-citationMeasurement of protonic resistance of catalyst layers as a tool for degradation monitoring
Gaumont, T., Maranzana, G., Lottin, O., Dillet, J., Didierjean, S., Pauchet, J., & Guétaz, L. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.10.035 · Cited by 75
Lee, M., Uchida, M., Tryk, D. A., Uchida, H., & Watanabe, M. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.03.072 · Cited by 72
Self-citationElectrostatic-Spray Ionization Mass Spectrometry
Qiao, L., Sartor, R., Gasilova, N., Lu, Y., Tobolkina, E., Liu, B., & Girault, H. H. (2012) · Analytical Chemistry · doi:10.1021/ac301332k · Cited by 72
A customized framework for 3-D morphological characterization of microporous layers
Nanjundappa, A., Alavijeh, A. S., Hannach, M. E., Harvey, D., & Kjeang, E. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.04.103 · Cited by 62
Morris, D. R. P., Liu, S. P., Villegas Gonzalez, D., & Gostick, J. T. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503509j · Cited by 59
Uchida, M. (2020) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2020.02.019 · Cited by 57
Self-citationCharacterization of pore network structure in catalyst layers of polymer electrolyte fuel cells
Hannach, M. E., Soboleva, T., Malek, K., Franco, A. A., Prat, M., Pauchet, J., & Holdcroft, S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.049 · Cited by 46
Proton Conduction and Oxygen Diffusion in Ultra-Thin Nafion Films in PEM Fuel Cell: How Thin?
Chen, D., Kongkanand, A., & Jorné, J. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0101902jes · Cited by 46
Takahashi, K., Kakinuma, K., & Uchida, M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0611610jes · Cited by 34
Self-citationTakahashi, K., Koda, R., Kakinuma, K., & Uchida, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251704jes · Cited by 32
Self-citationDogan, D. C., Cho, S., Hwang, S.-M., Kim, Y., Guim, H., Yang, T., Park, S., Park, G., & Yim, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08177 · Cited by 30
Self-citationSingle Cell Study of Water Transport in PEMFCs with Electrosprayed Catalyst Layers
Folgado, M. A., Conde, J. J., Ferreira-Aparicio, P., & Chaparro, A. M. (2018) · Fuel Cells · doi:10.1002/fuce.201700217 · Cited by 29
Lee, J. H., Doo, G., Kwon, S. H., Kang, H., Choi, S., Yim, S.-D., Kim, H.-T., & Lee, S. G. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00042 · Cited by 27
Chang, K.-H., Cho, S., Lim, E. J., Park, S., & Yim, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.01.065 · Cited by 5
Self-citation
Cited by
Xu, Q., Zhang, L., Zhang, J., Wang, J., Hu, Y., Jiang, H., & Li, C. (2022) · EnergyChem · doi:10.1016/j.enchem.2022.100087 · Cited by 341
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
Electrode Engineering for Electrochemical CO2 Reduction
Li, G., Yan, T., Chen, X., Liu, H., Zhang, S., & Ma, X. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c00271 · Cited by 52
Conde, J. J., Ferreira-Aparicio, P., & Chaparro, A. M. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c01445 · Cited by 49
Kobayashi, A., Fujii, T., Takeda, K., Tamoto, K., Kakinuma, K., & Uchida, M. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c02836 · Cited by 46
Self-citation
Metadata
- Authors
- Cho, S., Tamoto, K., & Uchida, M.
- Affiliations
- University of Yamanashi (JP)
- Corresponding author
- Uchida, Makoto
- ORCID
- Uchida, Makoto
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-09-16
- Volume
- 34
- Issue
- 11
- Pages
- 14853-14863
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W3087551014
- Cited by
- 24
- References
- 39
- Citations by year
- 2026: 4 · 2025: 2 · 2024: 8 · 2023: 3 · 2022: 4 · 2021: 3
- FWCI
- 0.86
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Energy & Fuels (publishedVersion, cc-by-nc-nd)
- Funders
- Ministry of Education, Culture, Sports, Science and Technology (NA)
- New Energy and Industrial Technology Development Organization (NA)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- proton exchange membrane fuel cells, electrospray deposition, catalyst layer, ionomer morphology, oxygen transport resistance, ionization mode, limiting current, mass activity, catalyst layer thickness
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.