The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Design and Simulation of Cs2BiAgI6 Double Perovskite Solar Cells with Different Electron Transport Layers for Efficiency Enhancement
Abstract
Lead-free Cs 2 BiAgI 6 has garnered a lot of research interest recently due to its suitability as a potential absorber layer in the solar cell (SC) architecture owing to its low cost, good stability, and high efficiency. The main highlight of this research work includes the photovoltaic (PV) performance enhancement of Cs 2 BiAgI 6 double perovskite solar cells (PSCs) by optimizing the optoelectronic parameters of the absorber, electron transport layer (ETL), hole transport layer (HTL), and various interface layers. Solar Cell Capacitance Simulator One dimension (SCAPS-1D) numerical simulation was used to optimize the performance of Cs 2 BiAgI 6 absorber-based SCs consisting of copper barium thiostannate (CBTS) as the HTL and TiO 2, PCBM, ZnO, IGZO, SnO 2, and WS 2 as ETLs. The role of the non-lead cesium-based halide perovskite absorber layer in the improvement of the SC performance was systematically investigated through a variation in the thickness, doping density, and defect density of the absorber layer, ETL, and HTL. The performance of the investigated device architectures is largely dependent on the thickness of the absorber layer, acceptor density, defect density, and the combination of different ETLs and HTLs. We found that TiO 2, PCBM, ZnO, IGZO, SnO 2, and WS 2 ETL-based optimized devices recorded a power conversion efficiency (PCE) of 23.14, 23.71, 23.69, 22.97, 23.61, and 21.72%, respectively. Furthermore, the effect of series and shunt resistances, temperature, capacitance, and Mott–Schottky for the six optimized devices was estimated along with the computation of the corresponding generation and recombination rates, current density–voltage ( J – V ), and quantum efficiency (QE) characteristics. The PV parameters obtained from this comprehensive analysis are finally compared with the earlier published theoretical and experimental reports on Cs 2 BiAgI 6 absorber-based SCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Slavney, A. H., Hu, T., Lindenberg, A. M., & Karunadasa, H. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13294 · Cited by 2,204
Cs2AgBiX6 (X = Br, Cl): New Visible Light Absorbing, Lead-Free Halide Perovskite Semiconductors
McClure, E. T., Ball, M. R., Windl, W., & Woodward, P. M. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04231 · Cited by 1,674
Prospects for low-toxicity lead-free perovskite solar cells
Ke, W., & Kanatzidis, M. G. (2019) · Nature Communications · doi:10.1038/s41467-019-08918-3 · Cited by 1,137
From Lead Halide Perovskites to Lead‐Free Metal Halide Perovskites and Perovskite Derivatives
Xiao, Z., Song, Z., & Yan, Y. (2019) · Advanced Materials · doi:10.1002/adma.201803792 · Cited by 1,090
Wang, W., Tadé, M. O., & Shao, Z. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00113g · Cited by 922
Chen, M., Ju, M.-G., Garces, H. F., Carl, A. D., Ono, L. K., Hawash, Z., Zhang, Y., Shen, T., Qi, Y., Grimm, R. L., et al. (2019) · Nature Communications · doi:10.1038/s41467-018-07951-y · Cited by 759
Hossain, M. K., Rubel, M. H. K., Toki, G. F. I., Alam, I., Rahman, M. F., & Bencherif, H. (2022) · ACS Omega · doi:10.1021/acsomega.2c05912 · Cited by 648
Self-citationHossain, M. K., Toki, G. F. I., Kuddus, A., Rubel, M. H. K., Hossain, M. M., Bencherif, H., Rahman, M. F., Islam, M. R., & Mushtaq, M. (2023) · Scientific Reports · doi:10.1038/s41598-023-28506-2 · Cited by 629
Self-citationProgress of Lead‐Free Halide Double Perovskites
Igbari, F., Wang, Z., & Liao, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803150 · Cited by 562
“Unleaded” Perovskites: Status Quo and Future Prospects of Tin‐Based Perovskite Solar Cells
Ke, W., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Advanced Materials · doi:10.1002/adma.201803230 · Cited by 533
Rational Design of Halide Double Perovskites for Optoelectronic Applications
Zhao, X.-G., Yang, D., Ren, J.-C., Sun, Y., Xiao, Z., & Zhang, L. (2018) · Joule · doi:10.1016/j.joule.2018.06.017 · Cited by 508
Recent progress in tin-based perovskite solar cells
Cao, J., & Yan, F. (2021) · Energy & Environmental Science · doi:10.1039/d0ee04007j · Cited by 479
Fan, Q., Biesold‐McGee, G. V., Ma, J., Xu, Q., Pan, S., Peng, J., & Lin, Z. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201904862 · Cited by 460
Stable and Highly Efficient Photocatalysis with Lead‐Free Double‐Perovskite of Cs2AgBiBr6
Zhang, Z., Liang, Y., Huang, H., Liu, X., Li, Q., Chen, L., & Xu, D. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201900658 · Cited by 431
Hossain, M. K., Arnab, A. A., Das, R. C., Hossain, K. M., Rubel, M. H. K., Rahman, M. F., Bencherif, H., Emetere, M. E., Mohammed, M. K. A., & Pandey, R. (2022) · RSC Advances · doi:10.1039/d2ra06734j · Cited by 431
Self-citationComposition Stoichiometry of Cs2AgBiBr6 Films for Highly Efficient Lead-Free Perovskite Solar Cells
Igbari, F. O., Wang, R., Wang, Z., Ma, X., Wang, Q., Wang, K., Zhang, Y., Liao, L., & Yang, Y. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b00238 · Cited by 373
Ouslimane, T., Et-taya, L., Elmaimouni, L., & Benami, A. (2021) · Heliyon · doi:10.1016/j.heliyon.2021.e06379 · Cited by 367
Device simulation of highly efficient eco-friendly CH3NH3SnI3 perovskite solar cell
Patel, P. K. (2021) · Scientific Reports · doi:10.1038/s41598-021-82817-w · Cited by 333
Ma, W., Tumbleston, J. R., Wang, M., Gann, E., Huang, F., & Ade, H. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200912 · Cited by 306
Efficiency Enhancement in Organic Photovoltaic Cells: Consequences of Optimizing Series Resistance
Servaites, J. D., Yeganeh, S., Marks, T. J., & Ratner, M. A. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901107 · Cited by 295
Huang, L., Sun, X., Li, C., Xu, R., Xu, J., Du, Y., Wu, Y., Ni, J., Cai, H., Li, J., et al. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.08.025 · Cited by 267
Inorganic Hole Transporting Materials for Stable and High Efficiency Perovskite Solar Cells
Chen, J., & Park, N.-G. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01177 · Cited by 255
Yang, X., Chen, Y., Liu, P., Xiang, H., Wang, W., Ran, R., Zhou, W., & Shao, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202001557 · Cited by 235
Tara, A., Bharti, V., Sharma, S., & Gupta, R. (2021) · Optical Materials · doi:10.1016/j.optmat.2021.111362 · Cited by 218
Lin, L., Jiang, L., Li, P., Fan, B., & Qiu, Y. (2019) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2018.09.024 · Cited by 214
Limitations of Cs3Bi2I9 as Lead-Free Photovoltaic Absorber Materials
Ghosh, B., Wu, B., Mulmudi, H. K., Guet, C., Weber, K., Sum, T. C., Mhaisalkar, S., & Mathews, N. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14735 · Cited by 212
Removing Leakage and Surface Recombination in Planar Perovskite Solar Cells
Tvingstedt, K., Gil-Escrig, L., Momblona, C., Rieder, P., Kiermasch, D., Sessolo, M., Baumann, A., Bolink, H. J., & Dyakonov, V. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00719 · Cited by 206
Minemoto, T., & Murata, M. (2014) · Current Applied Physics · doi:10.1016/j.cap.2014.08.002 · Cited by 202
Yin, L., Wu, H., Pan, W., Yang, B., Li, P., Luo, J., Niu, G., & Tang, J. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900491 · Cited by 195
Wang, M., Zeng, P., Bai, S., Gu, J., Li, F., Yan, J., & Liu, M. (2018) · Solar RRL · doi:10.1002/solr.201800217 · Cited by 178
Advances in Lead-Free Perovskite Single Crystals: Fundamentals and Applications
Tailor, N. K., Kar, S., Mishra, P., These, A., Kupfer, C., Hu, H., Awais, M., Saidaminov, M. I., Dar, M. I., Brabec, C. J., et al. (2021) · ACS Materials Letters · doi:10.1021/acsmaterialslett.1c00242 · Cited by 125
Hossain, M. K., Rahman, M., Basher, M. K., Manir, M. S., & Bashar, M. S. (2018) · Optik · doi:10.1016/j.ijleo.2018.09.170 · Cited by 69
Self-citationIslam, M. R., Mazumder, A. A. M., Mojumder, M. R. H., Shifat, A. S. M. Z., & Hossain, M. K. (2023) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/acb09e · Cited by 54
Self-citation
Cited by
Hossain, M. K., Mohammed, M. K. A., Pandey, R., Arnab, A. A., Rubel, M. H. K., Hossain, K. M., Ali, M. H., Rahman, M. F., Bencherif, H., Madan, J., et al. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00035 · Cited by 301
Self-citation
Metadata
- Authors
- Hossain, M. K., Samajdar, D. P., Das, R. C., Arnab, A. A., Rahman, M. F., Rubel, M. H. K., Islam, M. R., Bencherif, H., Pandey, R., Madan, J., & Mohammed, M. K. A.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2023-02-17
- Volume
- 37
- Issue
- 5
- Pages
- 3957-3979
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W4321182794
- Cited by
- 305
- References
- 36
- FWCI
- 22.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.