Modeling of Carbon Dioxide Adsorption onto Ammonia-Modified Activated Carbon: Kinetic Analysis and Breakthrough Behavior
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
The removal of carbon dioxide from the flue gas of fossil-fueled power plants can be achieved using adsorption separation technologies. In this study, the breakthrough adsorption of CO 2 on fixed beds of commercial granular activated carbon (GAC) and ammonia-modified GAC (OXA-GAC) adsorbents was measured. The breakthrough curves were acquired from dynamic column measurements at temperatures ranging from 30 to 60 °C with a feed gas flow rate that varied from 50 to 100 mL min –1 and a total pressure of 1.0 atm. An earlier breakthrough time and lower dynamic adsorption capacity were observed with increasing temperature, increasing feed flow rate, and the use of the GAC adsorbent. The largest CO 2 equilibrium dynamic capacity (0.67 mol kg –1 ) and breakthrough time (10.9 min) over the range of operating conditions investigated were obtained using OXA-GAC adsorbent at 30 °C under a 50 mL min –1 feed flow rate. To predict the breakthrough behavior of the fixed-bed adsorption of CO 2, a simple model based on mass balance was developed. This model consists of an Avrami equation to describe the kinetics of adsorption and a semiempirical Toth equation to represent the gas–solid equilibrium isotherm. The Avrami equation was selected because it provided the best fit with the experimental kinetic curves for both adsorbents, with average relative errors of less than 2% over the temperature range of 30–60 °C. The resultant set of coupled differential equations was solved using a numerical approach based on the finite element method implemented in COMSOL Multiphysics software. The findings showed that the model predictions successfully fit the experimental data over the studied range of feed gas flow rates and adsorption temperatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption
Shafeeyan, M. S., Wan Daud, W. M. A., & Shamiri, A. (2014) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.08.018 · Cited by 293
Self-citationAdsorption of CO2on Zeolite 13X and Activated Carbon with Higher Surface Area
Zhang, Z., Zhang, W., Chen, X., Xia, Q., & Li, Z. (2010) · Separation Science and Technology · doi:10.1080/01496390903571192 · Cited by 146
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.04.015 · Cited by 100
Cited by
Application of doped photocatalysts for organic pollutant degradation - A review
Khaki, M. R. D., Shafeeyan, M. S., Raman, A. A. A., & Daud, W. M. A. W. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.04.099 · Cited by 663
Self-citationXu, X., Zheng, Y., Gao, B., & Cao, X. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.165 · Cited by 280
Manyà, J. J., García-Morcate, D., & González, B. (2020) · Applied Sciences · doi:10.3390/app10010376 · Cited by 66
Application of biochar for acid gas removal: experimental and statistical analysis using CO2
Bamdad, H., Hawboldt, K., MacQuarrie, S., & Papari, S. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-04509-3 · Cited by 42
Vacuum swing CO2 adsorption cycles in Waste-to-Energy plants
Durán, I., Rubiera, F., & Pevida, C. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122841 · Cited by 29
Metadata
- Authors
- Shafeeyan, M. S., Daud, W. M. A. W., Shamiri, A., & Aghamohammadi, N.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-09-16
- Volume
- 29
- Issue
- 10
- Pages
- 6565-6577
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2281331986
- Cited by
- 155
- References
- 6
- FWCI
- 11.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modeling of Carbon Dioxide Adsorption onto Ammonia-Modified Activated Carbon: Kinetic Analysis and Breakthrough Behavior. https://app.cochat.ai/papers/10.1021/acs.energyfuels.5b00653
- The paper
- Shafeeyan, M. S., Daud, W. M. A. W., Shamiri, A., & Aghamohammadi, N. (2015). Modeling of Carbon Dioxide Adsorption onto Ammonia-Modified Activated Carbon: Kinetic Analysis and Breakthrough Behavior. Energy & Fuels. https://doi.org/10.1021/acs.energyfuels.5b00653
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.