The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Effect of Operating Parameters and Moisture Content on Municipal Solid Waste Pyrolysis and Gasification
Open accessAbstract
Pyrolysis/gasification-based waste-to-energy (WtE) techniques, comprising partial oxidation of waste and subsequent syngas combustion, show potential benefits over direct incineration. To facilitate their development under the specific conditions of China, pyrolysis and gasification of typical municipal solid waste (MSW) are investigated in a fluidized bed reactor. The effect of the equivalence ratio (ER), reaction temperature, and moisture content on MSW conversion is studied. A rising ER increases the syngas yield but decreases the syngas heating value. The combustible gas yield is strengthened at lower ERs and later drops when the ER exceeds 0.4 as a result of the continuously enhanced oxidation reactions. A higher temperature favors pyrolysis reactions but causes an evident decrease in the syngas heating value during gasification. When the ER is at 0.4 and the temperature is at 650 °C, an optimum operating performance is obtained under the specific input simulated MSW (S-MSW) and test conditions, with an energy conversion efficiency of 68.5%. Under such a circumstance, the further increase of the MSW moisture content is effective for stimulating H 2 production; nevertheless, the quality of syngas degrades, and the energy conversion efficiency declines. The appropriate MSW moisture content is found to be lower than 20–25%. Besides, emiessions, such as heavy metals and dioxins, are also compared to conventional incineration to verify the environmental feasibility of gasification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Cited by
Potential of pyrolysis processes in the waste management sector
Czajczyńska, D., Anguilano, L., Ghazal, H., Krzyżyńska, R., Reynolds, A. J., Spencer, N., & Jouhara, H. (2017) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2017.06.003 · Cited by 531
Plastic waste upcycling toward a circular economy
Zhao, X., Korey, M., Li, K., Copenhaver, K., Tekinalp, H., Celik, S., Kalaitzidou, K., Ruan, R., Ragauskas, A. J., & Ozcan, S. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131928 · Cited by 421
Municipal solid waste as a sustainable resource for energy production: State-of-the-art review
Shah, A. V., Srivastava, V. K., Mohanty, S. S., & Varjani, S. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105717 · Cited by 288
Wet organic waste treatment via hydrothermal processing: A critical review
Marzbali, M. H., Kundu, S., Halder, P., Patel, S., Hakeem, I. G., Paz-Ferreiro, J., Madapusi, S., Surapaneni, A., & Shah, K. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.130557 · Cited by 147
Rambhatla, N., Panicker, T. F., Mishra, R. K., Manjeshwar, S. K., & Sharma, A. (2025) · Results in Engineering · doi:10.1016/j.rineng.2024.103679 · Cited by 133
Metadata
- Authors
- Dong, J., Chi, Y., Tang, Y., Ni, M., Nzihou, A., Weiss-Hortala, E., & Huang, Q.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-04-29
- Volume
- 30
- Issue
- 5
- Pages
- 3994-4001
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2342485918
- Cited by
- 158
- References
- 1
- FWCI
- 4.71
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Operating Parameters and Moisture Content on Municipal Solid Waste Pyrolysis and Gasification. https://app.cochat.ai/papers/10.1021/acs.energyfuels.6b00042
- The paper
- Dong, J., Chi, Y., Tang, Y., Ni, M., Nzihou, A., Weiss-Hortala, E., & Huang, Q. (2016). Effect of Operating Parameters and Moisture Content on Municipal Solid Waste Pyrolysis and Gasification. Energy & Fuels. https://doi.org/10.1021/acs.energyfuels.6b00042
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.