Evaluating the Feasibility of a TSA Process Based on Steam Stripping in Combination with Structured Carbon Adsorbents To Capture CO2 from a Coal Power Plant
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
The present work evaluates the feasibility to capture at least 85% of the CO2 emitted by an advanced supercritical pulverized coal power plant of 800 MWe, delivering a CO2 product with a purity of 95% (dry basis) or higher, using an adsorption-based postcombustion capture process based on carbon honeycomb monoliths regenerated by steam stripping. Process performance has been evaluated through the dynamic simulation of the cyclic adsorption process. The fixed bed adsorption model, which was validated against experimental results, is based on the mass, momentum, and energy conservation equations, and it accounts for competitive adsorption between the three main flue gas components: N2, CO2, and H2O. The evaluated TSA process meets the targets for the capture rate and product purity, with a heat duty of 3.59 MJ kg–1 CO2, which is close to the specific reboiler duty of the benchmark amine-based absorption process. Materials and process development will lead to lower duties. A sensitivity analysis was carried out, and it has shown that slightly faster adsorption kinetics for CO2 could drop the specific heat duty of the process to 2.89 MJ kg–1 CO2, which is lower than that of the benchmark technology. From the process point of view, the use of waste heat from the power plant could further reduce the energy penalty of the integrated CO2 capture process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads
Shen, C., Liu, Z., Li, P., & Yu, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202097y · Cited by 138
Use of the Linear Driving Force Approximation to Guide the Design of Monolithic Adsorbents
Patton, A., Crittenden, B. D., & Perera, S. P. (2004) · Chemical Engineering Research and Design · doi:10.1205/0263876041580749 · Cited by 114
Plaza, M. G., Durán, I., Querejeta, N., Rubiera, F., & Pevida, C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b01720 · Cited by 62
Self-citationPlaza, M. G., Durán, I., Querejeta, N., Rubiera, F., & Pevida, C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04856 · Cited by 61
Self-citationInfluence of Water Vapor on CO2 Adsorption Using a Biomass-Based Carbon
Plaza, M. G., González, A. S., Pevida, C., & Rubiera, F. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie500342q · Cited by 41
Self-citation
Cited by
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Research progress on CO2 capture and utilization technology
Fu, L., Ren, Z., Si, W., Ma, Q., Huang, W., Liao, K., Huang, Z., Wang, Y., Li, J., & Xu, P. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102260 · Cited by 529
Review on CO2 Capture Using Amine-Functionalized Materials
Hack, J., Maeda, N., & Meier, D. M. (2022) · ACS Omega · doi:10.1021/acsomega.2c03385 · Cited by 366
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
Review on Reactor Configurations for Adsorption-Based CO 2 Capture
Dhoke, C., Zaabout, A., Cloete, S., & Amini, S. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04547 · Cited by 240
A high adsorption capacity bamboo biochar for CO2 capture for low temperature heat utilization
Ji, Y., Zhang, C., Zhang, X. J., Xie, P. F., Wu, C., & Jiang, L. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121131 · Cited by 140
Plaza, M. G., & Rubiera, F. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.079 · Cited by 53
Self-citationPlaza, M. G., & Rubiera, F. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122002 · Cited by 39
Self-citation
Metadata
- Authors
- Plaza, M. G., Rubiera, F., & Pevida, C.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-09-01
- Volume
- 31
- Issue
- 9
- Pages
- 9760-9775
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2742948980
- Cited by
- 68
- References
- 7
- FWCI
- 1.90
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.