The DOI matches its Crossref record; 39 of the 41 references it cites were found in a registry or an index.
Time and Temperature Effects on Alkali Chloride Induced High Temperature Corrosion of Superheaters during Biomass Firing
Open accessAbstract
The high content of alkali chloride in deposits which form during biomass firing in power plants contributes significantly to corrosion of the superheaters. In order to understand the influence of time and temperature on high temperature corrosion under such harsh conditions, laboratory scale studies as a function of time and temperature were carried out using KCl coated samples of the austenitic stainless steel (TP347H). To understand the progress of corrosion with time, isothermal exposures at 560 °C (from 83.5 to 672 h) and at 600 °C (from 83.5 to 168 h) were conducted in a gas mixture comprising of O 2, H 2 O, CO 2, HCl, and SO 2 . In addition, samples were subjected to temperature variations between 560 and 600 °C to gain insights on the influence of temperature. The microstructure and elemental composition of the corrosion products resulting from the exposures were studied with scanning electron microscopy and energy dispersive X-ray spectroscopy, respectively. The results show that corrosion attack progressed with time such that the thickness of the consistently identified three regions of corrosion products increased with time, therefore suggesting that the corrosion products were not protective. Also, exposures under varying temperature conditions revealed that an increased corrosion attack would occur once the superheater experiences a higher temperature, because a memory effect from prior exposure at higher temperature propagates more corrosion attack during subsequent exposure to a lower temperature.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
FactSage thermochemical software and databases — recent developments
Bale, C. W., Bélisle, E., Chartrand, P., Decterov, S. A., Eriksson, G., Hack, K., Jung, I.-H., Kang, Y.-B., Melançon, J., Pelton, A. D., et al. (2009) · Calphad · doi:10.1016/j.calphad.2008.09.009 · Cited by 1,666
The implications of chlorine-associated corrosion on the operation of biomass-fired boilers
Nielsen, H. P., Frandsen, F. J., Dam-Johansen, K., & Baxter, L. L. (2000) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(00)00003-4 · Cited by 785
Self-citationGrabke, H. J., Reese, E., & Spiegel, M. (1995) · Corrosion Science · doi:10.1016/0010-938x(95)00011-8 · Cited by 537
Zahs, A., Spiegel, M., & Grabke, H. J. (2000) · Corrosion Science · doi:10.1016/s0010-938x(99)00142-0 · Cited by 365
Asteman, H., Svensson, J.-E., Johansson, L.-G., & Norell, M. (1999) · Oxidation of Metals · doi:10.1023/a:1018875024306 · Cited by 304
Deposition and high temperature corrosion in a 10 MW straw fired boiler
Michelsen, H. P., Frandsen, F., Dam-Johansen, K., & Larsen, O. H. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00062-3 · Cited by 258
Self-citationAntunes, R. A., & de Oliveira, M. C. L. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.07.013 · Cited by 184
Sulfation of Potassium Chloride at Combustion Conditions
Iisa, K., Lu, Y., & Salmenoja, K. (1999) · Energy & Fuels · doi:10.1021/ef990057a · Cited by 169
Zahs, A., Spiegel, M., & Grabke, H. J. (1999) · Materials and Corrosion · doi:10.1002/(sici)1521-4176(199910)50:10<561::aid-maco561>3.0.co;2-l · Cited by 146
Self-citationPettersson, J., Folkeson, N., Johansson, L.-G., & Svensson, J.-E. (2011) · Oxidation of Metals · doi:10.1007/s11085-011-9240-z · Cited by 117
Lab-Scale Investigations of High-Temperature Corrosion Phenomena in Straw-Fired Boilers
Nielsen, H. P., Frandsen, F., & Dam‐Johansen, K. (1999) · Energy & Fuels · doi:10.1021/ef990001g · Cited by 114
Self-citationBender, R., & Schütze, M. (2003) · Materials and Corrosion · doi:10.1002/maco.200390129 · Cited by 97
SEM Investigation of Superheater Deposits from Biomass-Fired Boilers
Jensen, P. A., Frandsen, F. J., Hansen, J., Dam-Johansen, K., Henriksen, N., & Hörlyck, S. (2004) · Energy & Fuels · doi:10.1021/ef030097l · Cited by 96
Self-citationEffective new chemicals to prevent corrosion due to chlorine in power plant superheaters
Aho, M. J., Vainikka, P., Taipale, R., & Yrjas, P. (2007) · Fuel · doi:10.1016/j.fuel.2007.05.033 · Cited by 93
What Makes a Good Catalyst for the Deacon Process?
Over, H., & Schomäcker, R. (2013) · ACS Catalysis · doi:10.1021/cs300735e · Cited by 89
Reducing superheater corrosion in wood‐fired boilers
Henderson, P., Szakálos, P., Pettersson, R., Andersson, C., & Högberg, J. (2006) · Materials and Corrosion · doi:10.1002/maco.200503899 · Cited by 87
Hot corrosion behavior of boiler tube materials in refuse incineration environment
Yamada, K., Tomono, Y., Morimoto, J., Sasaki, Y., & Ohmori, A. (2002) · Vacuum · doi:10.1016/s0042-207x(01)00468-7 · Cited by 87
High temperature interaction of Al/Si-modified Fe–Cr alloys with KCl
Li, Y. S., Niu, Y., & Spiegel, M. (2006) · Corrosion Science · doi:10.1016/j.corsci.2006.10.019 · Cited by 86
Pettersson, J., Svensson, J. E., & Johansson, L. G. (2009) · Oxidation of Metals · doi:10.1007/s11085-009-9153-2 · Cited by 65
van Lith, S. C., Frandsen, F., Montgomery, M., Vilhelmsen, T., & Jensen, S. A. (2009) · Energy & Fuels · doi:10.1021/ef9000924 · Cited by 63
Self-citationModels describing the degradation of FeAl and NiAl alloys induced by ZnCl2–KCl melt at 400–450 °C
Li, Y. S., & Spiegel, M. (2004) · Corrosion Science · doi:10.1016/j.corsci.2003.10.019 · Cited by 59
The Transport Properties and Defect Structure of the Oxide (Fe, Cr)2O3formed on FeCr alloys
Hay, K. A., Hicks, F. G., & Holmes, D. R. (1970) · Materials and Corrosion · doi:10.1002/maco.19700211107 · Cited by 51
Okoro, S. C., Montgomery, M., Frandsen, F., & Pantleon, K. (2014) · Energy & Fuels · doi:10.1021/ef5017335 · Cited by 48
Self-citationExperiences with high temperature corrosion at straw‐firing power plants in Denmark
Montgomery, M., Jensen, S. A., Borg, U., Biede, O., & Vilhelmsen, T. (2011) · Materials and Corrosion · doi:10.1002/maco.201005856 · Cited by 45
Self-citationPaneru, M., Stein-Brzozowska, G., Maier, J., & Scheffknecht, G. (2013) · Energy & Fuels · doi:10.1021/ef4005626 · Cited by 44
KCl‐induced high temperature corrosion of selected commercial alloys: Part I: chromia‐formers
Kiamehr, S., Dahl, K. V., Montgomery, M., & Somers, M. A. J. (2015) · Materials and Corrosion · doi:10.1002/maco.201408213 · Cited by 42
Self-citationKarlsson, S., Jonsson, T., Hall, J., Svensson, J., & Liske, J. (2014) · Energy & Fuels · doi:10.1021/ef402127h · Cited by 40
Microstructural investigation of the oxide formed on TP 347H FG during long‐term steam oxidation
Hansson, A. N., Danielsen, H. K., Grumsen, F. B., & Montgomery, M. (2009) · Materials and Corrosion · doi:10.1002/maco.200905439 · Cited by 39
Self-citationSulfation of Condensed Potassium Chloride by SO2
Sengeløv, L. W., Hansen, T. B., Bartolomé, C., Wu, H., Pedersen, K., Frandsen, F., Jensen, A. D., & Glarborg, P. (2013) · Energy & Fuels · doi:10.1021/ef400405z · Cited by 38
Self-citationEffect of Water Vapor on High-Temperature Corrosion under Conditions Mimicking Biomass Firing
Okoro, S. C., Montgomery, M., Frandsen, F., & Pantleon, K. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b01045 · Cited by 37
Self-citationDamø, A. J., Wu, H., Frandsen, F., et al. (2014) · Energy & Fuels · doi:10.1021/ef5003815 · Cited by 32
Self-citationOkoro, S. C., Kiamehr, S., Montgomery, M., Frandsen, F. J., & Pantleon, K. (2017) · Materials and Corrosion · doi:10.1002/maco.201609173 · Cited by 27
Self-citationHansson, A. N., Hattel, J. H., Dahl, K. V., et al. (2009) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/17/3/035009 · Cited by 21
Rammer, B., & Galetz, M. C. (2016) · Materials and Corrosion · doi:10.1002/maco.201608841 · Cited by 21
Okoro, S. C., Kiamehr, S., Montgomery, M., Frandsen, F., & Pantleon, K. (2016) · Materials and Corrosion · doi:10.1002/maco.201609174 · Cited by 17
Self-citationOkoro, S. C., Montgomery, M., Frandsen, F., & Pantleon, K. (2015) · Materials at High Temperatures · doi:10.1179/0960340914z.00000000081 · Cited by 16
Self-citationSegmented Kinetic Investigation on Condensed KCl Sulfation in SO2/O2/H2O at 523–1023 K
Hu, Z., Wang, X., Wang, Z., Wang, Y., & Tan, H. (2014) · Energy & Fuels · doi:10.1021/ef502024q · Cited by 16
A Laboratory Study of the in Situ Sulfation of Alkali Chloride Rich Deposits: Corrosion Perspective
Karlsson, S., Larsson, E., Jonsson, T., Svensson, J.-E., & Liske, J. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b00372 · Cited by 16
Mechanisms and Kinetics of Oxidation
Chevalier, S. (2009) · Elsevier eBooks · doi:10.1016/b978-044452787-5.00010-x · Cited by 10
Research works printed but not linked: 3
- Frandsen, F. J. Ash Formation, Deposition and Corrosion When Utilizing Straw for Heat and Power Production, Dr. Techn. Thesis, Department of Chemical and Biochemical Engineering, Technical University of Denmark, Kongens Lyngby, 2011; ISBN: 9788792481405.
- 10.1002/(SICI)1521-4176(199910)50:10<561::AID-MACO561>3.0.CO;2-L · DOI
- Salmenoja K., 1999, J. Inst. Energy, 72, 127
Cited by
Sadeghi, E., Markocsan, N., & Joshi, S. V. (2019) · Journal of Thermal Spray Technology · doi:10.1007/s11666-019-00938-1 · Cited by 163
The influence of potassium-rich biomass ashes on steel corrosion above 550 °C
Mlonka-Mędrala, A., Magdziarz, A., Kalemba–Rec, I., & Nowak, W. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.02.074 · Cited by 73
Sadeghi, E., Markocsan, N., & Joshi, S. V. (2019) · Journal of Thermal Spray Technology · doi:10.1007/s11666-019-00939-0 · Cited by 60
Mlonka-Mędrala, A., Gołombek, K., Buk, P., Cieślik, E., & Nowak, W. (2019) · Energy · doi:10.1016/j.energy.2019.116062 · Cited by 46
Phother-Simon, J., Hanif, I., Liske, J., & Jonsson, T. (2021) · Corrosion Science · doi:10.1016/j.corsci.2021.109315 · Cited by 37
“rapid breakaway oxidation of the primary oxide scale formed on the stainless steel 304 L and that the protection is dominated by the secondary protection regime [12,18,59,60].”
Background
Metadata
- Authors
- Okoro, S. C., Montgomery, M., Frandsen, F. J., & Pantleon, K.
- Affiliations
- Technical University of Denmark (DK)
- Corresponding author
- Okoro, Sunday Chukwudi
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-06-11
- Volume
- 32
- Issue
- 7
- Pages
- 7991-7999
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2808066234
- Cited by
- 24
- References
- 41
- Citations by year
- 2026: 4 · 2025: 1 · 2024: 1 · 2023: 7 · 2022: 2 · 2021: 3 · 2020: 2 · 2019: 4
- FWCI
- 1.83
- Type
- journal article
- Language
- en
- Open access
- green
- orbit.dtu.dk
- Licence
- other-oa
- Locations
- Energy & Fuels (publishedVersion)
- Technical University of Denmark, DTU Orbit (Technical University of Denmark, DTU) (submittedVersion, other-oa)
- Funders
- Strategiske Forskningsr?d (DSF 10-093956)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Energy › Fuel Technology › Chemical Looping and Thermochemical Processes
- Keywords
- high-temperature corrosion, superheater, biomass combustion, corrosion products, temperature effects, time-dependent corrosion, memory effects
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A second model labelled each claim on 2026-10-12 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.