CoChat

Effects of Hydrothermal Carbonization Conditions on the Combustion and Kinetics of Wheat Straw Hydrochar Pellets and Efficiency Improvement Analyses

The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.

Abstract

Hydrothermal carbonization conditions can affect the combustion and kinetics of wheat straw hydrochar pellets. Temperature and time are the key influencing factors of the hydrothermal carbonization reaction. Hence, exploring the effects of hydrothermal carbonization temperature and time on the combustion and kinetics is of great significance, which can also summarize the conditions for efficiency improvement. Herein, the chemical characteristics and surface microstructures of hydrochar and the combustion characteristics, ash fusibility, slagging characteristics, and kinetics of hydrochar pellets were analyzed. The results indicated that the carbon microspheres appeared on the surface of hydrochar from 220 °C for 10 min. The combustion characteristics under 180 and 220 °C were better than those under 260 °C. The slagging tendency of hydrochar pellets was lower than that of wheat straw pellets. It belonged to moderate melting ash and a low slagging rate when HTC conditions equaled or exceeded 220 °C for 10 min. Activation energies were moderate under 220 °C for 10, 20, and 30 min. Hydrochar pellets had high fuel efficiency under 220 °C for 10, 20, and 30 min. The comprehensive combustibility index was positively correlated with hemicellulose and negatively correlated with lignin. The positive correlation was between the cellulose content and the activation energy of the first zone.

Overview

Integrity signals

Registry

Crossref · 10.1021/acs.energyfuels.9b03754

Cites

43 of 43 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 1

  1. Zhang, J. Study on the forming mechanisms, physical properties and combustion characteristics of briquettes made form Caragana korshinskii Kom. Ph.D. Dissertation, Shanxi Agricultural University, Taigu, Shanxi, China, 2014.

Metadata

Authors
Zhang, X., Li, Y., Wang, M., Han, L., & Liu, X.
Affiliations
China Agricultural University (CN)
Corresponding author
Liu, Xian
Venue
Energy & Fuels
Published
2019-12-17
Volume
34
Issue
1
Pages
587-598
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2995598520
Cited by
37
References
43
Citations by year
2026: 2 · 2025: 4 · 2024: 7 · 2023: 10 · 2022: 8 · 2021: 5 · 2020: 1
FWCI
1.23
Type
journal article
Language
en
Open access
closed
Locations
Energy & Fuels (publishedVersion)
Funders
  • Ministry of Science and Technology of the People's Republic of China (2016YFE0112800)
  • China Agriculture Research System (CARS-36)
Topics
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Engineering › Mechanical Engineering › Coal Combustion and Slurry Processing
  • Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
Keywords
hydrothermal carbonization, wheat straw, combustion characteristics, combustion kinetics, activation energy, slagging, ash fusibility, carbon microspheres, hemicellulose, lignin, cellulose, biomass pelletization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.