Dynamic Material Flow Analysis of PET, PE, and PP Flows in Europe: Evaluation of the Potential for Circular Economy
Open accessThe DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
This study evaluates the potential circularity of PET, PE, and PP flows in Europe based on dynamic material flow analysis (MFA), considering product lifetimes, demand growth rates, and quality reductions of recycled plastic (downcycling). The circularity was evaluated on a baseline scenario, representing 2016 conditions, and on prospective scenarios representing key circularity enhancing initiatives, including (i) maintaining constant plastic consumption, (ii) managing waste plastic exports in the EU, (iii) design-for-recycling initiatives, (iv) improved collection, and (v) improved recovery and reprocessing. Low recycling rates ( RR, 13–20%) and dependence on virgin plastic, representing 85–90% of the annual plastic demand, were demonstrated after 50 years in the baseline. Limited improvements were related to the individual scenarios, insufficient to meet existing recycling targets. However, by combining initiatives, RRs above 55%, where 75–90% was recycled in a closed loop, were demonstrated. Moreover, 40–65% of the annual demand could potentially be covered by recycled plastic. Maintaining a constant plastic demand over time was crucial in order to reduce the absolute dependence on virgin plastic, which was not reflected by the RR . Thus, focusing strictly on RRs and even whether and to which extent virgin material is substituted, is insufficient for evaluating the transition toward circularity, which cannot be achieved by technology improvements alone—the demand must also be stabilized.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Mapping Global Flows of Chemicals: From Fossil Fuel Feedstocks to Chemical Products
Levi, P. G., & Cullen, J. M. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b04573 · Cited by 392
Plastic waste from recycling centres: characterisation and evaluation of plastic recyclability
Faraca, G., & Astrup, T. (2019) · Waste Management · doi:10.1016/j.wasman.2019.06.038 · Cited by 370
Self-citationPerugini, F., Mastellone, M. L., & Arena, U. (2005) · Environmental Progress · doi:10.1002/ep.10078 · Cited by 347
EFSA Panel on food contact materials, E. (2011) · EFSA Journal · doi:10.2903/j.efsa.2011.2184 · Cited by 334
Eriksen, M. K., Christiansen, J. D., Daugaard, A. E., & Astrup, T. F. (2019) · Waste Management · doi:10.1016/j.wasman.2019.07.005 · Cited by 329
Self-citationCommon Misconceptions about Recycling
Geyer, R., Kuczenski, B., Zink, T., & Henderson, A. (2016) · Journal of Industrial Ecology · doi:10.1111/jiec.12355 · Cited by 299
Plastic waste as a fuel - CO2-neutral or not?
Eriksson, O., & Finnveden, G. (2009) · Energy & Environmental Science · doi:10.1039/b908135f · Cited by 272
Circular economy of plastic packaging: Current practice and perspectives in Austria
Van Eygen, E., Laner, D., & Fellner, J. (2018) · Waste Management · doi:10.1016/j.wasman.2017.11.040 · Cited by 262
Research works printed but not linked: 6
- European Plastic Industry, 2018, The European Plastics Industry Circular Economy Voluntary Commitments towards 50% Plastics Waste Recycling
- World Economic Forum, 2016, The New Plastics Economy-Rethinking the Future of Plastics
- PlasticsEurope Market Research Group (PEMRG)/Consultic Marketing & Industrieberatung GmbH, 2017, Plastics—the Facts 2017, 16
- EC, 2008, Off. J. Eur. Communities, 86, 9
- PlasticsEurope, 2017, Plastics—the Facts 2017: Analysis of European Plastics Production, Demand and Waste Data
- European Union, 2019, Environmental Impact Assessments of Innovative Bio-Based Product
Cited by
Items 101–130 of 130
Zhou, Y., Dong, Q., Matsom, H., Dai, J., Ciano, T., & Arshad, N. I. (2025) · Computers & Industrial Engineering · doi:10.1016/j.cie.2025.111764 · Cited by 1
TRANSITION TO CIRCULAR ECONOMY IN THE BRAZILIAN PLASTIC INDUSTRY SUPPLY CHAIN
Viana, F. L. E., Guedes, M. D. S. B., Araújo, F. T. D. V., de Figueiredo, M. D., & Feitosa, L. I. (2025) · Revista de Administração de Empresas · doi:10.1590/s0034-759020250405 · Cited by 3
Viana, F. L. E., Guedes, M. D. S. B., Araújo, F. T. D. V., de Figueiredo, M. D., & Feitosa, L. I. (2025) · Revista de Administração de Empresas · doi:10.1590/s0034-759020250405x · Cited by 1
Heleno, L., Vasco, J. O. C., Oliveira, N. S., Gaspar, M., & Silveira, A. (2026) · Environmental Technology & Innovation · doi:10.1016/j.eti.2026.105091 · Cited by 2
Perspectives of Material Flow Analysis in Plastic Waste Management
Pishehvarz, G., & Azamat, J. (2024) · Wiley eBooks · doi:10.1002/9783527842209.ch11 · Cited by 2
Klein, K. (2022) · Publication Server of Goethe University Frankfurt am Main (Goethe University Frankfurt) · doi:10.21248/gups.70776
Polymer Biodegradation and Polymeric Biomass Valorization
Bulak, P. (2023) · MDPI eBooks · doi:10.3390/books978-3-0365-7318-2
Conversion of Non-Recyclable Cable Plastic Residue into Valuable Feedstocks Via Steam CrackingPreprint
Vela, I. C., Maric, J., González-Arias, J., & Seemann, M. C. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4484688
Modelling and optimizing material flows in electrical energy distribution – first model
Cabrera, E. G., Illés, B., & Cservenák, Á. (2023) · Advanced Logistic Systems - Theory and Practice · doi:10.32971/als.2023.030
Li, Z., & Huang, H. (2024) · Energy Informatics · doi:10.1186/s42162-024-00372-w
“Eriksen et al. (2020) explored the CE challenges of PET, PE and PP in the supply chain and assessed the potential circularity of PET, PE and PP in the supply chain through dynamic logistics analysis.”
BackgroundAssessing the Potential of Biodegradable Plastics in a Circular Economy: A Methodological Outlook
Scheers, Q., Nimmegeers, P., Galant, O., Spatari, S., Brande, N. P. V. D., Brancart, J., & Billen, P. (2024) · Circular Economy and Sustainability · doi:10.1007/s43615-024-00476-1 · Cited by 2
“Secondly, biodegradable plastics enable recovery through composting or anaerobic digestion, reducing the loss of plastic waste in landfilling and incineration, compared to conventional alternatives [10, 20, 46].”
Circularity assessment of 3D-printed polymer façades
Silvennoinen, H., Piccioni, V., Olivo, N. E., Milano, F., Block, P., & Wolf, C. D. (2025) · CRC Press eBooks · doi:10.1201/9781003658641-69
Breslmayer, G., Gritsch, L., & Lederer, J. (2025) · Sustainability · doi:10.3390/su17209105 · Cited by 1
“Eriksen et al. [38] focused on European PET, PP, and PE flows.”
Francomme, C., & Brial, A. (2025) · Revue d’Économie Régionale & Urbaine · doi:10.3917/reru.254.0587
Shahabi, A. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.146933 · Cited by 1
Shukla, S., Shastri, Y., & Hoadley, A. (2026) · Journal of Industrial Ecology · doi:10.1007/s44498-026-00035-x
“It is a well-accepted method for evaluating CE potential and has already been applied to sectors such as plastics, metals, and electronic waste (Eriksen et al., 2020; Hagedorn et al., 2024).”
Fostering industrial collaboration for polyester recycling in a circular economy
Shih, H., Lu, Y.-H., Chao, C.-Y., Yang, H., & Ma, H. (2026) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2026.108920
Dey, I., Samanta, K., & Bose, S. (2026) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-072924-115520
Zeytünlü, C., & Akarsu, C. (2026) · Microplastics · doi:10.3390/microplastics5020060 · Cited by 1
Circular Economy in the Small Island Economies : a potential solution to their vulnerabilities?
Francomme, C. (2024) · theses.fr (ABES) · doi:10.70675/cf60c69cz5a4bz45cczb565zb8f1dd7befa4 · Cited by 3
Carbon flow map: a substance flow analysis of carbon in the Dutch economy
Petrík, J., Kramer, G. J., Tunn, V. S. C., & Shen, L. (2026) · Journal of Industrial Ecology · doi:10.1007/s44498-026-00065-5 · Cited by 2
“Plastics, for example, have been mapped in detail across the EU countries, covering production, consumption, waste, and recycling (Amadei et al., 2023; Eriksen et al., 2020; Hsu et al., 2021; Lobelle et al., 2024).”
Squaring the circle? When circular economy meets post-growth
Boutiab, A., & Distefano, T. (2026) · Macroeconomic Dynamics · doi:10.1017/s1365100526100972
“Similarly, Brusselaers et al. (2022), applied a CGE model for Belgium, as a small open economy, to demonstrate that local job creation and reduced import dependency depend critically on global market reactions and national competitiveness.”
Djouambi, N., Yallese, M. A., Kaddeche, M., Maoudj, A., Khellaf, A., & Nouioua, M. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-18556-x
“The role of polymers in industrial production has contin - ued to grow, both in unreinforced and in fibre-reinforced grades [1, 2 ], with fibre-reinforced polymer-matrix composites (PMCs) now widely adopted across aerospace, transport and biomedical applications where a high strength-to-weight…”
Maione, C., Lapko, Y., & Trucco, P. (2026) · Discover Sustainability · doi:10.1007/s43621-026-03988-y
“Current research tends to examine different elements of the system independently, and only a minor body of literature has focused on how changes in one tier of the plastic’s value chain can affect other tiers, looking at the interplay between different actors [24– 27].”
Circularity Policy Interventions in One Sector Can Reduce Circularity in Others
Maeder, M., Reichert, D., & Fröhling, M. (2026) · Environmental Science & Technology · doi:10.1021/acs.est.6c05815
Ong, Q. Y., Ragaert, K., van Eijk, M. C. P., Schmuck, A., Meester, S. D., & Teng, S. Y. (2026) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2026.109120
Plastic recycling rates need a common standard
Liu, X., Liu, G., Chen, J., & Chen, W. (2026) · Cell Reports Sustainability · doi:10.1016/j.crsus.2026.100796
Muratkhan, M., Muratkhan, Z., Mukazhanova, Z., Shaimenova, B., Bulashev, B., Saduakhassova, S., Zhazykbayeva, Z., Kiykbay, A., Ospankulova, G., & Liang, W. (2026) · Foods · doi:10.3390/foods15203603
“…(PE), polypropylene (PP), and polyethylene terephthalate (PET), together with functional polymers such as polyvinyl alcohol (PVA), are widely used in food, household-product, personal-care, and medical packaging owing to their favorable trans-parency, heat-sealability, and barrier properties [3].”
Yue, X. U., Jinhui, L. I., & Tan, Q. (2026) · Waste Management · doi:10.1016/j.wasman.2026.115946
Can the European recycling target for plastic packaging be met? A scenario analysis for Finland
Johansson, A., Rinne, P., Jylhä, H., & Salminen, J. (2026) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2026.109213
Metadata
- Authors
- Eriksen, M. K., Pivnenko, K., Faraca, G., Boldrin, A., & Astrup, T. F.
- Affiliations
- Technical University of Denmark (DK)
- European Commission (BE)
- Corresponding author
- Eriksen, Marie Kampmann
- ORCID
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-11-23
- Volume
- 54
- Issue
- 24
- Pages
- 16166-16175
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W3106715001
- Cited by
- 130
- References
- 24
- Citations by year
- 2026: 20 · 2025: 32 · 2024: 20 · 2023: 21 · 2022: 25 · 2021: 12
- FWCI
- 5.21
- Type
- journal article
- Language
- en
- Open access
- green
- orbit.dtu.dk
- Licence
- Locations
- Environmental Science & Technology (publishedVersion)
- PubMed (publishedVersion)
- Technical University of Denmark, DTU Orbit (Technical University of Denmark, DTU) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Sustainability and Ecological Systems Analysis
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Keywords
- circular economy, plastic recycling, PET, polyethylene, polypropylene, plastic waste, downcycling, recycling rate, design for recycling, plastic waste exports, waste collection, product lifetime, demand stabilization, closed-loop recycling, Europe
- MeSH terms
- Europe, Plastics, Prospective Studies, Product Packaging, Positron-Emission Tomography, Recycling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.