CoChat

Quantitative Protection Factors for Common Masks and Face Coverings

Open access
Leith, David, L’Orange, Christian, Volckens, John · 2021 · Environmental Science & Technology

The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.

Abstract

The performance of masks, whether intended to protect the community from exhaled infectious aerosol or to protect the wearer from inhaled infectious aerosol, depends on factors such as filtration efficiency, particle size distribution, leakage, and ventilation rate. These factors depend on the activities and facial features of the mask wearer so that the mask performance for real-world applications is difficult to predict. The present work shows how protection factor, a quantity often used to describe mask performance, can be estimated without involving human volunteers. By constraining these factors to known values, mask protection factors can be compared fairly and efficiently following a series of filtration efficiency measurements performed in the laboratory. Protection factors and mask emissions for exhalation and inhalation were evaluated for masks of seven types currently in use around the world and for a hypothetical mask with 99% efficiency on all particles. The performance of reusable masks made from cotton fabric was limited by the size of the native cotton fibers. Masks that utilized finer fibers, particularly electret fibers with relatively small diameters, showed excellent performance with moderate flow resistance. Results from this work, in addition to simple guidance for mask fit and usage, can facilitate risk communication and decision-making efforts during the COVID-19 pandemic.

Overview

Integrity signals

Registry

Crossref · 10.1021/acs.est.0c07291

Cites

23 of 23 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 6

  1. 2019, Procedure No. TEB-APR-STP-0059 Revision 3.2, Determination of Particulate Filter Efficiency Level for N95 Series Filters Against Solid Particulates for Non-Powered, Air-Purifying Respirators Standard Testing Procedure (STP)
  2. 2017, Designation: F2299/F2299M-03 Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres
  3. 2009, EN 149: 2001+A1 Respiratory protective devices – Filtering half masks to protect against particles – Requirements, testing, marking
  4. 2009, OSHA 3352–02 2009 Assigned Protection Factors for the Revised Respiratory Protection Standard
  5. 2020, Community face coverings – guide to minimum requirements, methods of testing and use
  6. AATC, 2020, M14–2020 Guidance and considerations for general purpose textile face coverings: adult

Cited by

See all 29

Metadata

Authors
Leith, D., L’Orange, C., & Volckens, J.
Affiliations
  • University of North Carolina at Chapel Hill (US)
  • Colorado State University (US)
Corresponding author
Volckens, John
Venue
Environmental Science & Technology
Published
2021-02-18
Volume
55
Issue
5
Pages
3136-3143
ISSN
  • 0013-936X (ISSN-L)
  • 1520-5851
OpenAlex
W3129426227
Cited by
29
References
22
Citations by year
2026: 3 · 2024: 2 · 2023: 4 · 2022: 14 · 2021: 5
FWCI
4.04
Type
journal article
Language
en
Open access
Locations
  • Environmental Science & Technology (publishedVersion, cc-by-nc-nd)
  • PubMed (publishedVersion)
  • Carolina Digital Repository (University of North Carolina at Chapel Hill) (submittedVersion, cc-by-nc-nd)
  • UNC Libraries
Funders
World Health Organization
Topics
  • Health Sciences › Medicine › Pulmonary and Respiratory Medicine › Infection Control and Ventilation
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Aerosol Filtration and Electrostatic Precipitation
  • Social Sciences › Sociology and Political Science › COVID-19 Prevention and Impact
Keywords
face masks, face coverings, protection factor, filtration efficiency, airborne transmission, mask leak, mask fit, flow resistance, COVID-19 pandemic, risk communication
MeSH terms
COVID-19, SARS-CoV-2, Aerosols, Humans, Masks, Pandemics

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.