The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Heterogeneous Degradation of Organic Pollutants by Persulfate Activated by CuO-Fe3O4: Mechanism, Stability, and Effects of pH and Bicarbonate Ions
Abstract
Magnetic CuO-Fe3O4 composite was fabricated by a simple hydrothermal method and characterized as a heterogeneous catalyst for phenol degradation. The effects of pH and bicarbonate ions on catalytic activity were extensively evaluated in view of the practical applications. The results indicated that an increase of solution pH and the presence of bicarbonate ions were beneficial for the removal of phenol in the CuO-Fe3O4 coupled with persulfate (PS) process. Almost 100% mineralization of 0.1 mM phenol can be achieved in 120 min by using 0.3 g/L CuO-Fe3O4 and 5.0 mM PS at pH 11.0 or in the presence of 3.0 mM bicarbonate. The positive effect of bicarbonate ion is probably due to the suppression of copper leaching as well as the formation of Cu(III). The reuse of catalyst at pH0 11.0 and 5.6 showed that the catalyst remains a high level of stability at alkaline condition (e.g., pH0 11.0). On the basis of the characterization of catalyst, the results of metal leaching and EPR studies, it is suggested that phenol is mainly destroyed by the surface-adsorbed radicals and Cu(III) resulting from the reaction between PS and Cu(II) on the catalyst. Taking into account the widespread presence of bicarbonate ions in waste streams, the CuO-Fe3O4/PS system may provide some new insights for contaminant removal from wastewater.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Handbook of X-Ray Photoelectron Spectroscopy
Moulder, J. F., Chastain, J., & King, R. C. (1995) · Medical Entomology and Zoology · Cited by 26,851
Mechanism of Base Activation of Persulfate
Furman, O. S., Teel, A. L., & Watts, R. J. (2010) · Environmental Science & Technology · doi:10.1021/es1013714 · Cited by 1,396
Influence of pH on the Formation of Sulfate and Hydroxyl Radicals in the UV/Peroxymonosulfate System
Guan, Y.-H., Ma, J., Li, X.-C., Fang, J.-Y., & Chen, L.-W. (2011) · Environmental Science & Technology · doi:10.1021/es2017363 · Cited by 1,338
Zhang, T., Zhu, H., & Croué, J.-P. (2013) · Environmental Science & Technology · doi:10.1021/es304721g · Cited by 1,203
In Situ Chemical Oxidation of Contaminated Soil and Groundwater Using Persulfate: A Review
TSITONAKI, A., PETRI, B., CRIMI, M., MOSBÆK, H., SIEGRIST, R. L., & BJERG, P. L. (2010) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643380802039303 · Cited by 1,166
Xu, L., & Wang, J. (2012) · Environmental Science & Technology · doi:10.1021/es300303f · Cited by 1,130
Guan, Y.-H., Ma, J., Ren, Y.-M., Liu, Y.-L., Xiao, J.-Y., Lin, L.-Q., & Zhang, C. (2013) · Water Research · doi:10.1016/j.watres.2013.06.023 · Cited by 1,037
Zhang, T., Chen, Y., Wang, Y., Le Roux, J., Yang, Y., & Croué, J.-P. (2014) · Environmental Science & Technology · doi:10.1021/es501218f · Cited by 798
Pham, A. N., Xing, G., Miller, C. J., & Waite, T. D. (2013) · Journal of Catalysis · doi:10.1016/j.jcat.2013.01.025 · Cited by 753
Ding, Y., Zhu, L., Wang, N., & Tang, H. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.09.015 · Cited by 693
Cited by
Wang, J., & Wang, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.059 · Cited by 4,087
Chemistry of persulfates in water and wastewater treatment: A review
Wacławek, S., Lutze, H. V., Grübel, K., Padil, V. V. T., Černík, M., & Dionysiou, D. D. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.07.132 · Cited by 1,874
Xiao, S., Cheng, M., Zhong, H., Liu, Z., Liu, Y., Yang, X., & Liang, Q. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123265 · Cited by 954
Huang, G.-X., Wang, C.-Y., Yang, C.-W., Guo, P.-C., & Yu, H.-Q. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b03007 · Cited by 905
Feng, Y., Wu, D., Deng, Y., Zhang, T., & Shih, K. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b05974 · Cited by 704
Shao, P., Tian, J., Yang, F., Duan, X., Gao, S., Shi, W., Luo, X., Cui, F., Luo, S., & Wang, S. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705295 · Cited by 698
Yang, Q., Ma, Y., Chen, F., Yao, F., Sun, J., Wang, S., Yi, K., Hou, L., Li, X., & Wang, D. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122149 · Cited by 663
Gao, Y., Zhu, Y., Lyu, L., Zeng, Q., Xing, X., & Hu, C. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b05246 · Cited by 626
Jawad, A., Zhan, K., Wang, H., Shahzad, A., Zeng, Z., Wang, J., Zhou, X., Ullah, H., Chen, Z., & Chen, Z. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.9b04696 · Cited by 599
Dong, X., Ren, B., Sun, Z., Li, C., Zhang, X., Kong, M., Zheng, S., & Dionysiou, D. D. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.04.052 · Cited by 554
Ding, Y., Wang, X., Fu, L., Peng, X., Pan, C., Mao, Q., Wang, C., & Yan, J. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.142794 · Cited by 537
Ushani, U., Lu, X., Wang, J., Zhang, Z., Dai, J., Tan, Y., Wang, S., Li, W., Niu, C., Cai, T., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126232 · Cited by 451
Yao, Y., Chen, H., Lian, C., Wei, F., Zhang, D., Wu, G., Chen, B., & Wang, S. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.03.089 · Cited by 440
Tan, C., Gao, N., Fu, D., Deng, J., & Deng, L. (2017) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.11.016 · Cited by 429
Wang, S., Liu, Y., & Wang, J. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.0c03256 · Cited by 412
Ren, W., Gao, J., Lei, C., Xie, Y., Cai, Y., Ni, Q., & Yao, J. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.05.143 · Cited by 401
Sludge biochar-based catalysts for improved pollutant degradation by activating peroxymonosulfate
Huang, B.-C., Jiang, J., Huang, G.-X., & Yu, H.-Q. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta02282h · Cited by 391
Ding, D., Liu, C., Ji, Y., Yang, Q., Chen, L., Jiang, C., & Cai, T. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.077 · Cited by 379
Su, C. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.06.060 · Cited by 365
Zhou, Y., Wang, X., Zhu, C., Dionysiou, D. D., Zhao, G., Fang, G., & Zhou, D. (2018) · Water Research · doi:10.1016/j.watres.2018.06.002 · Cited by 361
Cai, P., Zhao, J., Zhang, X., Zhang, T., Yin, G., Chen, S., Dong, C.-L., Huang, Y.-C., Sun, Y., Yang, D., et al. (2022) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2022.121091 · Cited by 355
Self-citationDu, J., Bao, J., Liu, Y., Kim, S. H., & Dionysiou, D. D. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.05.177 · Cited by 347
Chen, L., Ji, H., Qi, J., Huang, T., Wang, C.-C., & Liu, W. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126877 · Cited by 344
Oh, W.-D., & Lim, T.-T. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.203 · Cited by 334
Yao, Y., Chen, H., Qin, J., Wu, G., Lian, C., Zhang, J., & Wang, S. (2016) · Water Research · doi:10.1016/j.watres.2016.05.065 · Cited by 332
Gao, P., Tian, X., Nie, Y., Yang, C., Zhou, Z., & Wang, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.184 · Cited by 311
Ma, J., Yang, Y., Jiang, X., Xie, Z., Li, X., Chen, C., & Chen, H. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2017.09.148 · Cited by 309
Self-citationShao, H., Zhao, X., Wang, Y., Mao, R., Wang, Y., Qiao, M., Zhao, S., & Zhu, Y. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.07.016 · Cited by 306
Jiang, N., Xu, H., Wang, L., Jiang, J., & Zhang, T. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.0c04867 · Cited by 301
Jawad, A., Lang, J., Liao, Z., Khan, A., Ifthikar, J., Lv, Z., Long, S., Chen, Z., & Chen, Z. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.10.097 · Cited by 288
Zhu, K., Wang, X., Geng, M., Chen, D., Lin, H., & Zhang, H. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.06.006 · Cited by 223
Self-citationLimitations and Prospects of Sulfate-Radical Based Advanced Oxidation Processes
Duan, X., Yang, S., Wacławek, S., Fang, G., Xiao, R., & Dionysiou, D. D. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.103849 · Cited by 206
Rayaroth, M. P., Lee, C.-S., Aravind, U. K., Aravindakumar, C. T., & Chang, Y.-S. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.01.031 · Cited by 126
Li, Y., Li, L., Chen, Z.-X., Zhang, J., Gong, L., Wang, Y.-X., Zhao, H.-Q., & Mu, Y. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2017.10.126 · Cited by 102
Metadata
- Authors
- Lei, Y., Chen, C.-S., Tu, Y.-J., Huang, Y.-H., & Zhang, H.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-05-21
- Volume
- 49
- Issue
- 11
- Pages
- 6838-6845
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2394887079
- Cited by
- 728
- References
- 34
- FWCI
- 37.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.