Efficient Sorption and Removal of Perfluoroalkyl Acids (PFAAs) from Aqueous Solution by Metal Hydroxides Generated in Situ by Electrocoagulation
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
Removal of environmentally persistent perfluoroalkyl acids (PFAAs), that is, perfluorooctanesulfonate (PFOS) and perfluorocarboxylic acids (PFCAs, C4 ∼ C10) were investigated through sorption on four metal hydroxide flocs generated in situ by electrocoagulation in deionized water with 10 mM NaCl as supporting electrolyte. The results indicated that the zinc hydroxide flocs yielded the highest removal efficiency with a wide range concentration of PFOA/PFOS (1.5 μM ∼ 0.5 mM) at the zinc dosage <150 mg L(-1) with the energy consumption <0.18 Wh L(-1). The sorption kinetics indicated that the zinc hydroxide flocs had an equilibrium adsorbed amount (qe) up to 5.74/7.69 mmol g(-1) (Zn) for PFOA/PFOS at the initial concentration of 0.5 mM with an initial sorption rate (v0) of 1.01 × 10(3)/1.81 × 10(3) mmol g(-1) h(-1). The sorption of PFOA/PFOS reached equilibrium within <10 min. The sorption mechanisms of PFAAs on the zinc hydroxide flocs were proposed based on the investigation of various driving forces. The results indicated that the hydrophobic interaction was primarily responsible for the PFAAs sorption. The electrocoagulation process with zinc anode may have a great potential for removing PFAAs from industrial wastewater as well as contaminated environmental waterbody.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Olsen, G. W., Burris, J. M., Ehresman, D. J., Froehlich, J. W., Seacat, A. M., Butenhoff, J. L., & Zobel, L. R. (2007) · Environmental Health Perspectives · doi:10.1289/ehp.10009 · Cited by 2,049
Adsorption behavior and mechanism of perfluorinated compounds on various adsorbents—A review
Du, Z., Deng, S., Bei, Y., Huang, Q., Wang, B., Huang, J., & Yu, G. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.04.038 · Cited by 1,236
Self-citationA first global production, emission, and environmental inventory for perfluorooctane sulfonate
Paul, A. G., Jones, K. C., & Sweetman, A. J. (2009) · Environmental Science & Technology · doi:10.1021/es802216n · Cited by 1,096
Rahman, M. F., Peldszus, S., & Anderson, W. B. (2014) · Water Research · doi:10.1016/j.watres.2013.10.045 · Cited by 1,022
Polyfluoroalkyl compounds in the aquatic environment: a review of their occurrence and fate
Ahrens, L. (2011) · J. Environ. Monit. · doi:10.1039/c0em00373e · Cited by 759
Treatment of poly- and perfluoroalkyl substances in U.S. full-scale water treatment systems
Appleman, T. D., Higgins, C. P., Quiñones, O., Vanderford, B. J., Kolstad, C., Zeigler-Holady, J. C., & Dickenson, E. R. V. (2014) · Water Research · doi:10.1016/j.watres.2013.10.067 · Cited by 585
Ahrens, L., Taniyasu, S., Yeung, L. W. Y., Yamashita, N., Lam, P. K. S., & Ebinghaus, R. (2010) · Chemosphere · doi:10.1016/j.chemosphere.2010.01.045 · Cited by 418
The Adsorption of Perfluorooctane Sulfonate onto Sand, Clay, and Iron Oxide Surfaces
Johnson, R. L., Anschutz, A. J., Smolen, J. M., Simcik, M. F., & Penn, R. L. (2007) · Journal of Chemical & Engineering Data · doi:10.1021/je060285g · Cited by 389
Quantitative determination of fluorotelomer sulfonates in groundwater by LC MS/MS
Schultz, M. M., Barofsky, D. F., & Field, J. A. (2004) · Environmental Science & Technology · doi:10.1021/es035031j · Cited by 373
Adsorption behavior of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) on boehmite
Wang, F., Liu, C., & Shih, K. (2012) · Chemosphere · doi:10.1016/j.chemosphere.2012.06.071 · Cited by 260
Cited by
Degradation and Removal Methods for Perfluoroalkyl and Polyfluoroalkyl Substances in Water
Merino, N., Qu, Y., Deeb, R. A., Hawley, E. L., Hoffmann, M. R., & Mahendra, S. (2016) · Environmental Engineering Science · doi:10.1089/ees.2016.0233 · Cited by 349
“Themostfavorable sorption technology for Other Sor-bents is electrochemical assistance combined with zinc sheet (anode) and stainless steel (cathode) in an electrocoagulation reactor (Lin et al. , 2015).”
Emerging technologies for PFOS/PFOA degradation and removal: A review
Leung, S. C. E., Shukla, P., Chen, D., Eftekhari, E., An, H., Zare, F., Ghasemi, N., Zhang, D., Nguyen, N.-T., & Li, Q. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.153669 · Cited by 334
Yang, Y., Zheng, Z., Ji, W., Xu, J., & Zhang, X. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122686 · Cited by 309
Lu, D., Sha, S., Luo, J., Huang, Z., & Zhang Jackie, X. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121963 · Cited by 275
Radjenovic, J., Duinslaeger, N., Avval, S. S., & Chaplin, B. P. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.0c06212 · Cited by 268
Managing and treating per‐ and polyfluoroalkyl substances (PFAS) in membrane concentrates
Tow, E. W., Ersan, M. S., Kum, S., Lee, T., Speth, T. F., Owen, C., Bellona, C., Nadagouda, M. N., Mikelonis, A. M., Westerhoff, P., et al. (2021) · AWWA Water Science · doi:10.1002/aws2.1233 · Cited by 146
Remediation of water from per-/poly-fluoroalkyl substances (PFAS)–Challenges and perspectives
Garg, S., Wang, J., Kumar, P., Mishra, V., Arafat, H., Sharma, R. S., & Dumée, L. F. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105784 · Cited by 139
Metadata
- Authors
- Lin, H., Wang, Y., Niu, J., Yue, Z., & Huang, Q.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-08-13
- Volume
- 49
- Issue
- 17
- Pages
- 10562-10569
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2309453395
- Cited by
- 154
- References
- 15
- FWCI
- 6.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.