Carbon Capture and Utilization in the Industrial Sector
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The fabrication and manufacturing processes of industrial commodities such as iron, glass, and cement are carbon-intensive, accounting for 23% of global CO 2 emissions. As a climate mitigation strategy, CO 2 capture from flue gases of industrial processes—much like that of the power sector—has not experienced wide adoption given its high associated costs. However, some industrial processes with relatively high CO 2 flue concentration may be viable candidates to cost-competitively supply CO 2 for utilization purposes (e.g., polymer manufacturing, etc.). This work develops a methodology that determines the levelized cost ($/tCO 2 ) of separating, compressing, and transporting carbon dioxide. A top-down model determines the cost of separating and compressing CO 2 across 18 industrial processes. Further, the study calculates the cost of transporting CO 2 via pipeline and tanker truck to appropriately paired sinks using a bottom-up cost model and geo-referencing approach. The results show that truck transportation is generally the low-cost alternative given the relatively small volumes (ca. 100 kt CO 2 /a). We apply our methodology to a regional case study in Pennsylvania, which shows steel and cement manufacturing paired to suitable sinks as having the lowest levelized cost of capture, compression, and transportation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The cost of CO2 capture and storage
Rubin, E. S., Davison, J. E., & Herzog, H. J. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.05.018 · Cited by 1,008
A Gross‐Margin Model for Defining Technoeconomic Benchmarks in the Electroreduction of CO2
Verma, S., Kim, B., Jhong, H. “., Ma, S., & Kenis, P. J. A. (2016) · ChemSusChem · doi:10.1002/cssc.201600394 · Cited by 655
Economic and energetic analysis of capturing CO 2 from ambient air
House, K. Z., Baclig, A. C., Ranjan, M., van Nierop, E. A., Wilcox, J., & Herzog, H. J. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1012253108 · Cited by 524
Self-citationComparison of MEA capture cost for low CO2 emissions sources in Australia
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2010.06.004 · Cited by 132
Cited by
Industrial carbon dioxide capture and utilization: state of the art and future challenges
Gao, W., Liang, S., Wang, R., Jiang, Q., Zhang, Y., Zheng, Q., Xie, B., Toe, C. Y., Zhu, X., Wang, J., et al. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00025f · Cited by 1,388
Gür, T. M. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100965 · Cited by 821
McLaughlin, H., Littlefield, A. A., Menefee, M., Kinzer, A., Hull, T., Sovacool, B. K., Bazilian, M. D., Kim, J., & Griffiths, S. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113215 · Cited by 448
Modeling Amorphous Microporous Polymers for CO2Capture and Separations
Kupgan, G., Abbott, L. J., Hart, K. E., & Colina, C. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00691 · Cited by 272
Joarder, M. S. A., Islam, M. S., Hasan, M. H., Kutub, A., Kabir, M. F., Rashid, F., & Joarder, T. A. (2025) · Environmental Science and Pollution Research · doi:10.1007/s11356-025-36284-9 · Cited by 51
Metadata
- Authors
- Psarras, P. C., Comello, S., Bains, P., Charoensawadpong, P., Reichelstein, S., & Wilcox, J.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-09-19
- Volume
- 51
- Issue
- 19
- Pages
- 11440-11449
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2751610222
- Cited by
- 150
- References
- 4
- FWCI
- 7.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.